Canon 6 d and that compatible lenses?

Similar Questions

• I have a canon 70 d and just bought 12 elements. It will not open a file raw for me. I've been advised to download the latest version of camera raw, I did, and he always says that my camera is not supported. I really need to open my raw files. Peut

  I have a canon 70 d and just bought 12 elements. It will not open a file raw for me. I've been advised to download the latest version of camera raw, I did, and he always says that my camera is not supported. I really need to open my raw files. Can someone help me.

  Which version of the Camera Raw plugin do you have now?  Use the help / about Plug-ins / Camera Raw in the PSE to see Editor.

  Also this operating system you have, XP, Vista, or something more recent?

• I did a reinstall of XP Media Center Version 2005 with Update Rollup 2 and that you are unable to see my verizon cable internet connection? can canone help?

  I did a reinstall of XP Media Center Version 2005 with Update Rollup 2 and that you are unable to see my verizon cable internet connection? can anyone help?

  Thank you
  Joseph

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• Choose the good speedlite Canon 6 d and Nikon D 80

  Hello world. Please bear with me, I'm new on this.

  I went nuts online reading on choosing THE right speedlite for my camera (s). And I'm more confued as never before to ask if your advice.

  I have the following bodies:

  Canon 6 d (currently with 24-70 MM lens, you are looking to invest in a zoom super large and super telephoto in the future)

  Nikon D 80 (18-135 mm and 50 mm lens block)

  Using flash for me: I want to use it as a master, claw mounted, is thus also distance away if necessary. You want to use to fill, studio, night photography work.

  My maximum work is with the 6 d. I use the Nikon D 80 but often. Finally, I would like to make the wisest choice, as my budget is between $ 200 and $500.

  (1) I'm caught between the purchase of a Canon speedlite dedicated and buy a flash which is used on the two bodies and my wider lenses.

  (2) I read that the most powerful currently available for Canon speedlite is the 600 EX - RT his broader coverage corresponds to the focal length of 28 mm and upwards.

  Are there any other generic speedlites that don't cost the Earth and have a broader coverage with the same force as the 600 EX - RT?

  (3) OR foregoing, moreover, are a generic model that will as well on the nikon and canon?

  Appreciate your time and advice,

  Samy

  Samy

  Of course, only you can balance your desires/needs against your budget, but it seems that you intend to take the 6 D your battle horse and expect professional results with it, this is where to put your money.  Generic and unique for all made compromises now will be usually exact a price in the form of frustration and disappointment still on the line.  For your intended use and expected results, I would recommend biting teeth and go with the RT 600EX for the 6 d and a low price Nikon (recommended) or generic flash for the D80.  I would advise looking at material of opportunity to save money, but some years ago, I did it with a couple of flashes Nikon SB-26, from two different suppliers, only to discover that the reason why they were on the market was because motorized zoom mechanisms were worn.  At the moment where I've had have been renovated, I was in a bit of money to have bought new.  Since then, I was simply not a fan of the gear used.

  Good luck!

  Kind regards

  Ted

• Windows 7 Home Premium 64-bit with Canon IP6600D printer and unknown device

  I have a Windows 7 Premium build with a Canon Pixma IP6600D printer.  It worked sporatically at first with my Windows 7 until recently.  Now, I get an unknown device and the USB Plug N Play reports that it is not recognizing the device.  The USB port on the printer is good as it works perfectly on my XP machines and the USB port is on the PC as the other devices are recognized without incident.

  I tried stuff Device Manager usual for updated driver, updates the window, etc.  As this is a printer compatible 64-bit of Windows 7 (with some minor limitations), I was wondering why all drivers for Windows 7 is not recognize this printer.  Printer is good, USB is good, the cable is good.  Of course, the OEM driver disk is more compatible to reload the printer because it is a 32-bit application.  So, I rely on Microsoft Windows 7 drivers Canon for the deal.

  Just got off the phone with Canon and they confirm that the driver of Windows 7 are compatible plug-n-play and all I need and that Canon does not provide one direct driver other than the Add on Windows 7 x 64.

  Yet once, I ran all the windows and the driver updates to say everything is as current as possible.
  Next?

  THX.
  AGE

  Get the 64 bit Vista http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11864&default_os=windows_vista driver and install it, then the add-on (if you need it) on the same page, but change the OS to Windows 7 64-bit.

• My Canon DR 3060C is not compatible with Windows 7

  Canon did not update the DR-3060 64-bit driver. Does anyone have a solution for this?

  He has had some success using the DR - 2050 c 64 bit drivers. Please see the local thread for more details.

  My Scanner for Canon DR - 2080C is not compatible with Windows 7

  Just because Canon is not willing to update their library of drivers together does not mean that drivers designed for material with the internal equivalents "engines" will not work. Find the closest match, you can to your scanner that provides 64-bit Windows 7 drivers and give them a try. While some tests may be needed, you can always uninstall everything that does not work.

  If you reach a satisfactory success please post here with your experience so that others in similar circumstances can benefit.

• the raw files from Canon 80 d and adobe elements13

  Hi I just bought a canon 80 d and raw files will not download on 13 adobe elements Organizer. Jpeg files are ok to go top. My 600 d raw files would download on it. Any suggestions? See you soon.

  Found - answer seems canon that 80 d raw Files not compatible with the elements Seems 13, you need to update again! Only he was two years old and had to go to that because I had bought 600 d, were CR2 files which were not compatible with my previous host elements. Everything seems a bit of a jerk!

  There is an alternative, it seems that you can download a DNG Converter and convert your raw files to DNG and then edit them in 13 of the items.

• suggestion for soil moisture sensors that compatible with NI Labview?

  any suggestion for soil moisture sensors that compatible with NI Labview? Help me ~ ~!

  Fauzan says:

  any suggestion for soil moisture sensors that compatible with NI Labview? Help me ~ ~!

  Let me address your concerns about "compatible with NI LabVIEW" by asking you a question. Which soil moisture sensors are compatible with C++? Visual Basic? Visual C? JAVA?

  The sensors have a layer connection between himself and the computer. Sometimes, the sensor itself is directly connected to the computer via USB. Most of the time, there is a layer of connection which will interface to the computer - USB, RS-232, GPIB, PCI - and linking the layer is an acquisition of data, or simplified for your application, an analog input Module. It is up to you to set your software to interface with these devices.

  Now, I don't want to insult your intelligence. I bet you already know such things. But your question reads as if you have the same false ideas about LabVIEW with many people. That, LabVIEW is somehow a direct interface with the hardware, and you just bought sensors and LabVIEW magically presents the data. No matter what some people well planned would have you believe, this is not the case.

  OK, so take for example this soil moisture probe. It displays 0 to 3 volts and costs $30. So now we need a way to measure the voltage and send blood pressure data to a computer. We use USB. This thing right here will do the job and then some, for only $50, and is compatible with LabVIEW. My point is - LabVIEW is compatible with the device that ultimately connects to the computer - the sensor is simply a device of voltage output.

  I am not affiliated with or endorse I receommend or two devices, I've linked to, they were simply the result of a 10 second google search.

• I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why?

  I just bought a canon 6 d and I can not get my remote EXILE 430 flash. Anyone know why? Apparently my camera 'new' picture does not "see" the flash, must now the transmitter? Is there a Flash that work wirelessly with my canon 6 d?

  All remote flashes need a way to communicate with the camera.  They can be wired or wireless.  The wireless system can be optical or radio.

  The key is that there is nothing built in the 6 d to control a flash... If you need something to do this work.

  The 430EX II can be triggered via optical signal as a remote "slave" flash (430EX II cannot function as a mode of 'master' (aka 'Commander').)

  The method of Cannon to control the 430EX II is to use either:

  (a) a "Speedlite ST - E2 transmitter.

  (b) speedlite another able to work in "master" mode (and there's a long list... the 600EX / 600EX-RT, the 580EX II, and curiously the 90EX is actually able to perform a 'master').

  I recommend either the 600EX-RT (which would be the basis for additional units 600EX-RT in the future that would give you radio trigger) or find a 580EX II.  I probably spend on the 90EX and promote a ST - E2 if desired subject is a way to trigger the remote flash and don't actually want a flash.  The 90EX is not very powerful, so it is not particularly suitable as a stand-alone flash, unless you use it simply as a "fill" flash for close subjects.)

  There are also many 3rd party triggers, but the vast majority of them won't let you not use E - TTL (they would be "manual" only) and the units which support E - TTL will be too expensive to buy just a high flash range running as Commander.

• is the canon 28-135 ultrasonic objective compatible with the EOS 6 d

  is the canon 28-135 ultrasonic objective compatible with the EOS 6 d

  Yes, it's... and it's a pretty decent lens.

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• Canon mp640 printer and I am running Vista Home Premium. My email is Comcast. I can't print my email address

  original title: Debbie

  I have a Canon mp640 printer and I am running Vista Home Premium. My email is Comcast. I can't print from my email address. The error I get is as follows:

  An error has occurred in the script on this page.

  Line: 2107

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dll/preview.js

  Please help me.  I called Canon nothing is done.

  In fact, I already did what you said but it doesn't work. There is a conflict between windows explorer 9 and my canon mp640 printer. Microsoft consumer support figured this out for me.  What we have done is to uninstall internet explorer 9 and returned to internet explorer 8 and since that my printer works fine.

• How to disable the scaling software IPR and PPP compatible as Microsoft Office.

  original title: scaling software IPR and PPP compatible as Microsoft Office.
   
  Hello!
  Does anyone know how to disable the scaling of the DPI (or how custom scale) in IPR software compatible?
  In particular, how can I disable display picture in "Microsoft Office 2010"?
  Disable in properties of control does not work as it does for non-Microsoft programs.
  I have a screen 1440 x 900, and for most of the tasks, I prefer the screen so it should be about 4' of me usually use scaling of IPR. The problem is that in MS Office, the Ribbon of the toolbar > 25% of the screen on this setting. Hide the Ribbon is an option, but if I could selectively disable scaling (as I do with the chrome) - all my problems could be solved.
  Thanks for the advice/input!
  Rich

  Thank you for your empty insulting response. I wonder if your answer is just an automated response.

  Well, I was going to answer the Fahimulla K and politely point out that they may have misunderstood your question because you seem to have the "how-to" down to "Disable the display timing of high DPI settings" in the compatibility of most of the Programs tab.  So say what you said apparently is that Microsoft Office 2010 programs do not seem to allow that (the selection isn't activated - grey - so you cannot select)- but you have decided to go in a different direction (more rude/crude) before I got the chance.

  It will not win you a favor here - it is above all a forum for peer-to-peer (user to user).  Politeness a bit for the people spend their time (and as far as I know - the real Employees from Microsoft that poster here do still their choice, not obligation) goes a long way.  A little profanity goes even further - but not in the desired direction.  * smile *.

  However, I had planned on looking into this because he was intrigued, so despite the generally rude responses by you in the two posts, I found you so far - I'll post the results of my research (and my job steps) here in case it might be useful to someone.  I'll probably respond to the other post and a link to this post as well.

  At this stage, while having access to several computers, some with Office 2007 again and others with Office 2010 32 bit, I had not found the time to test and see if it is linked to all Office 2010 64-bit or not.  I confirmed that this setting does not seem to be available in Windows 7 (64 bit) for individual products Microsoft Office 2010 (64-bit versions.)

  An interesting thing I found in the Microsoft Knowledge Base has been "scale of the graphical object Microsoft Graph is reduced inside the bounding box when you insert it into a workbook in Excel" where they actually change you the setting in the Task Manager process tab-->.  This doesn't seem to work (not yet available) for common products (Word, Excel, etc.) as he says he does it to the CHART. EXE.

  So by doing research and without more information from you (such as possibly critical details that you probably have Windows 7 64-bit and 64-bit Microsoft Office 2010) and tests on one machine 64-bit Windows 7 but 32-bit Office 2010 - I note the checkboxes in the compatibility settings are available.  I first thought about this possibility when I noticed a part of this article:
  http://www.SevenForums.com/tutorials/316-compatibility-mode.html
  ... when they say, ' "NOTE: If the compatibility options are grayed out, then it is a 64-bit program and cannot be changed.".

  So - I would say the second part of the answer of the Fahimulla K would be a great place to start (and you did, looking at this post from you in the forums Microsoft Office... about a minute after the display of it here.)

  I think that you maybe isn't luck if - * if * you run the 64-bit version of Office 2010 that is.  Even Microsoft (for a long time - maybe still) recommended and installed Office 2010 32-bit default products.

  • http://social.technet.Microsoft.com/forums/en/Office2010/thread/40d17c38-90e0-48D9-8F83-d9721a24b063
  • http://Office.Microsoft.com/en-us/Word-help/choose-the-32-bit-or-64-bit-version-of-Microsoft-Office-HA010369476.aspx

  Not for the reason will be addressed during the conversation; even though it is an interesting puzzle and would not be limited to just Microsoft Office - but any 64-bit application, you can install.  Their idea was that in general there is some 64-bit plugins and same problem with 32-bit plugins that existed / exist for Microsoft Office.

  My suggestion, if my hypothesis about what architecture of Microsoft Office that you have installed is correct, would be to uninstall Microsoft Office 2010 64 bit and install Microsoft Office 2010 32-bit.

  Hope that helps someone.

• DELL WIRELESS 1450 WIRELESS USB ADAPT - compatibility issue program and that Dell SingleSource 802.11 WLAN

  Hi, is there anyone out there with the answer?

  Someone has already asked this last year, but no response.

  I've connected with TALK TALK yesterday and had to call technical support, for my wireless connection showed upward. With internet settings has changed, I can obviously connect.

  But because I ca using DELL WIRELESS 1450 WIRELESS USB ADAPTER I had TO re - run drive originally came with the adapter. But I'm now getting a message telling me: there is a known program compatibility issue and that Dell SingleSource 802.11 WLAN is not compatible with this version of Windows (Vista). This question-t - is there a compatible version? No solution is found when I select: find the solution online?

  Thanks, Sarah

  Sarah,

  Try to download and install this, I think this should work for 32 Bit and 64 Bit OS.

  Dell Wireless 1450 (802.11a/b/g) USB2.0 adapt

  Let me know if you have any problems.

• The programs compatibility error message saying that compatible with XP Service pack 2.

  I have Windows 7.  My itunes won't start I think because of the mistake of the program saying that compatible with XP Service pack 2 compatibility.

  I installed the latest version of itunes 64-bit for Windows 7 10 times already and rebooted several times, it still not open.
  Help, please.  I'm stuck. :(

  Hello

  You can read the following article and check.

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  You can also contact Apple for assistance on this issue.

  Get help choosing your product below

  http://www.Apple.com/support/

  See also:

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows