Canon CanoScan D660U Scanner Windows 7

Similar Questions

• I'm looking for a software to use my CanoScan D660U scanner.

  original title: SOFTWARE TO USE CANOSCAN D660U IN VISTA OR WINDOWS 7

  I have a CanoScan D660U scanner.   I have updated my computer and I have a laptop with Vista and a PC with Windows 7.  Are there downloads to update that will allow me to use the scanner with one or both of these new computers?

  Hello

  Try this link, that maybe that's what you're after for vista

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_d660u#DriversAndSoftware

  Or here on this link by Amrita M

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Canon-CanoScan-D660U-scanner-Windows-7/0deea185-E053-E011-8dfc-68b599b31bf5

  Concerning

  GT4U

• How can I get Canon CanoScan N676U Scanner to work in Windows 8?

  How my old Canon CanoScan N676U Scanner can work under windows 8?

  Hello

  The scanner can run on a computer that Windows 8 is there is compatible drivers from the hardware manufacturer. The manufacturer of the printer is responsible for creating compatible drivers.

  You can access the canon website to check if there are compatible drivers Windows 8.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_n676u

  Refer to this article to know how to install a printer.

  Install a printer: http://windows.microsoft.com/en-us/windows/install-printer#install-printer=windows-8

  In addition, if there are drivers for Windows 7 you can install the driver in Windows 7 compatibility mode to check if that helps.

  Make the programs more compatible with this version of Windows: http://windows.microsoft.com/en-us/windows-8/older-programs-compatible-version-windows

  Response with the State of the question and we will be happy to offer you our help.

• Canon CanoScan 9000F Scanner could not get current drivers for Windows 7 x 64 to work

  I just bought this machine and I am unable to get current drivers for Windows 7 x 64 to work. Cannon wrote it's the operating system, HP says it is the Scanner Software. Any help for this problem. The drivers have been downloaded from the Canon website.

  This scanner is not identified as compatible Win7 in http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx

  Canon claimed she had drivers for Win7 x 64?  I guess they did as you must refer to the version 16.0.1 so exactly what did say to blame the operating system [the two certifying their pilots as being compatible with Win7x64 & blame the BONE seem to be contradictions].

  I guess HP is the manufacturer of your PC.  I would say that you go only to get a resolution back to Canon & solve the compatibility problem.  They have a users Forum?

• Canon CanoScan 4400F Scanner USB

  I have a 64-bit computer and my Canoscan 4400F drivers are not compatible.  Where and how can I download them

  The Canon site us has drivers available for Windows 7 64 bit - see the link: CanoScan 4400F.

• Canon CanoScan 5600F Scanner

  have updates from 32 bit to 64 bit,

  whenever I try to scan to auto or

  Open the scanner, it comes up with the error msg

  "cannot find image. rather than use

  for target practice, is there a solution?

  Hello john,.

  I agree with Brian Tillman here.  Contact Canon support is the right thing to do here because the scanner uses their drivers and software to operate.

  Let us know what they come back with.

  Best regards

  Matthew_Ha

• 64-bit driver for scanner Canon Canoscan 670u

  I recently bought a new computer with Windows 7. When you try to install my Canoscan 670u scanner, no TWAIN drivers were found. On this site I found and successfully installed a driver 64-bit for this scanner that someone else I work for the same scan in Windows 7: http://www.64bitdrivers.com/driver.php?id=1368
  I restarted with and without the scanner is plugged, but I always get the message that no driver is installed. In the device, clicking Properties, on the Canoscan Device Manager: the drivers for this device are not installed. (Code 28).
  Any help on how to proceed now would be much appreciated.

  Hi hmarcuse,.

  Your scanner is not compatible with Windows 7:

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20CanoScan%20N670U%2048Bit%20USB%20PC%2FMAC%20Scanner&v=Canon&uid=7103A002AA&pf=0&pi=9&c=Printers%20%26%20Scanners&sc=Scanners&os=64-bit

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Canon CanoScan N650U/656U/12200 Scanner

  Anyone know how I can get my scanner Canon CanoScan N650U to work with Windows Vista Home Basic? I reinstalled the software and did a search for drivers all without success.
  Any help would be appreciated.

  Thank you

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=6858

  Read the link above and Select what you want drivers for operating system .

  There are No. Vista drivers available for your scanner model.

  Can written drivers for its products, not Microsoft.

  Time for another Scanner.

  See you soon. Mick Murphy - Microsoft partner

• Canon CanoScan 9900F flatbed USB Scanner to connect

  OT: Canon CanoScan 9900F flatbed USB Scanner
  You are looking for an application that someone may have created for this device and Windows 7 connect.

  Hi GaryDavisanswers,

  The following link shows that the CanoScan 9900F USB is not compatibile with windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=CanoScan%209900F&type=hardware

  I suggest you to install the drivers in compatibility mode.

  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the steps above fail, I suggest you to contact Canon for more support.

• How can I get my Canoscan n670u scanner to work with Windows 8?

  Hello

  I've upgraded from Vista to Windows 8 and was happy to see Win8 instantly detected my trusty Canoscan n670u scanner and recognized as a connected device. It is, therefore, correctly identified, in Device Manager, I tested the scanner via Device Manager and diagnostics is well spent - it buzzed away, and the screen displays a message about successful test. Large.

  However, when I use the Wizard Windows Fax Scan & and click new scan, I get the message no detected scan.

  Whuh?

  I tried to acquire an image using Onenote. The scanner passed through calibration, apparently successfully, then as he was about to start scanning, came to a stop with an error message.

  Help! It's a good piece of hardware. What I don't really understand not is Win8 apparently automatically detected and installed the drivers for it, but will not let me scan anything. ???

  Any suggestions?

  AH HA!

  He fixed the this morning.

  I have downloaded the Vista version of the "Canoscan Toolbox" software on the Canon's Support site (http://www.canon.co.uk/Support/Consumer_Products/products/scanners/CanoScan_series/CanoScan_N670U.aspx?type=download&page=1), installed and run the Compatibility Wizard. Success!

  Scanner works fine, although the software seems to forget default each I close.

  I don't care.

  Thanks for your reply though - if someone else asks that you can point their to this!

• Canon CanoScan LIDE 200 scanner not more known with the upgrade of the El Capitan

  Using my scanner USB Canon CanoScan LIDE 200 throughout the years that

  camera seems to no longer work after upgrading to El Capitan.

  The USB device ID is:

  Bus device 250 007: ID 04 a 9:1905 Canon, Inc. CanoScan LiDE 200

  
  

  What can I do to re - activate this device?

  Thanks for any help!

  Greetings

  ULI, DF4IAH

  Try VueScan http://www.hamrick.com/

• Trying to install Canon lide 35 scanner under Windows 7

  Hey all,.

  How can I get incompatible with win 7 64 bit scanner to scan on win 7 64 bit?

  As indicated above, really;  I have a canon lide 35 scanner and canon said that it will not work on win 7 64 bit.  I tried compatibility mode, but it does not work.  I just heard talk try windows xp mode, but when I try to download who he wants to validate my system.  Itself is not a problem, except that it was all installed etc but I can not download win xp mode.

  As well; Please could someone tell me if its worth plow me on win xp mode?  If so how?  Or is there another way?

  Any help much appreciated.

  My system is a bit of windows 7 Professional 64 acer 6930 laptop running.  3 GB of RAM and dual core 2 GHz processor.

  Thank you

  Charlie

  Hi ccs001,

  Have you tried the drivers from the Canon Website?  Looks like there drivers for Windows 7 if it's your correct machine:

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=10241

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Canon LiDE 700F scanner driver for OS10.11

  Since the El Capitan upgrade my Canon LiDE700f scanner is not recognized.

  I can't find a new driver for OS10.11 on Canon website.

  Any advice?

  Hi Alan_20,

  I understand that you are looking to get your Canon scanner to work with your Mac after upgrade to El Capitan. According to our records, there is software available for this device. It may help to check the software updates (via the Apple menu) before you connect your scanner.

  Look for software updates before connecting your printer or a scanner. This updates the list of the most recent supported on your Mac printer and scanner models. If you do not check the updates before trying to connect a new printer, you won't see the software available when you connect your device.

  Canon CanoScan LiDE 700F *.

  4.1.0a

  S

  Printer and scanner software available for download for your Mac
  https://support.Apple.com/en-us/HT201465

  If you are still unable to get your Mac to recognize your scanner, the next step would be to reset the printing of your Mac system.

  Mac OS X: how to reset the printing system
  https://support.Apple.com/en-us/HT201539

  See you soon!

• Canon CanoScan 8400F. No driver available.

  No driver available. Is there an updated driver for this device?

  Moved from feedback

  Original title: Canon CanoScan 8400F

  Hi Barbara Donaldson,.

  1. Which is exactly the problem that you are facing with CanoScan 8400F?
  2. What operating system is installed on the computer?

  CanoScan 8400F drivers are available for Windows go to this link.

  After the back if you have any questions.