Canon CanoScan N650U/656U/12200 Scanner
Anyone know how I can get my scanner Canon CanoScan N650U to work with Windows Vista Home Basic? I reinstalled the software and did a search for drivers all without success.
Any help would be appreciated.
Thank you
Read the link above and Select what you want drivers for operating system .
There are No. Vista drivers available for your scanner model.
Can written drivers for its products, not Microsoft.
Time for another Scanner.
See you soon. Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Canon CanoScan 9900F flatbed USB Scanner to connect
OT: Canon CanoScan 9900F flatbed USB Scanner
You are looking for an application that someone may have created for this device and Windows 7 connect.Hi GaryDavisanswers,
The following link shows that the CanoScan 9900F USB is not compatibile with windows 7.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=CanoScan%209900F&type=hardwareI suggest you to install the drivers in compatibility mode.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows -
Canon CanoScan LIDE 200 scanner not more known with the upgrade of the El Capitan
Using my scanner USB Canon CanoScan LIDE 200 throughout the years that
camera seems to no longer work after upgrading to El Capitan.
The USB device ID is:
Bus device 250 007: ID 04 a 9:1905 Canon, Inc. CanoScan LiDE 200
What can I do to re - activate this device?
Thanks for any help!
Greetings
ULI, DF4IAH
Try VueScan http://www.hamrick.com/
-
How can I get Canon CanoScan N676U Scanner to work in Windows 8?
How my old Canon CanoScan N676U Scanner can work under windows 8?
Hello
The scanner can run on a computer that Windows 8 is there is compatible drivers from the hardware manufacturer. The manufacturer of the printer is responsible for creating compatible drivers.
You can access the canon website to check if there are compatible drivers Windows 8.
http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_n676u
Refer to this article to know how to install a printer.
Install a printer: http://windows.microsoft.com/en-us/windows/install-printer#install-printer=windows-8
In addition, if there are drivers for Windows 7 you can install the driver in Windows 7 compatibility mode to check if that helps.
Make the programs more compatible with this version of Windows: http://windows.microsoft.com/en-us/windows-8/older-programs-compatible-version-windows
Response with the State of the question and we will be happy to offer you our help.
-
Canon CanoScan 9000F Scanner could not get current drivers for Windows 7 x 64 to work
I just bought this machine and I am unable to get current drivers for Windows 7 x 64 to work. Cannon wrote it's the operating system, HP says it is the Scanner Software. Any help for this problem. The drivers have been downloaded from the Canon website.
This scanner is not identified as compatible Win7 in http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx
Canon claimed she had drivers for Win7 x 64? I guess they did as you must refer to the version 16.0.1 so exactly what did say to blame the operating system [the two certifying their pilots as being compatible with Win7x64 & blame the BONE seem to be contradictions].
I guess HP is the manufacturer of your PC. I would say that you go only to get a resolution back to Canon & solve the compatibility problem. They have a users Forum?
-
I can't find Canon, (canoscan LIDE25) on my list of scanners
I can't find Canon, Canoscan LIDE25 on my list of scanners, difficulties to download the drivers for this device.
also I have more Moose record for the scanner
It worked before this computor, until I turned power off the POWER for a week then he's on vacation.
I can't find Canon, Canoscan LIDE25 on my list of scanners, difficulties to download the drivers for this device.
also I have more Moose record for the scanner
It worked before this computor, until I turned power off the POWER for a week then he's on vacation.
List of scanners. Where are you looking?
What problem you have download the driver or software of http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide25#DriversAndSoftware
-
compatible driver for CanoScan N650U/N656U
Can I download the compatible drivers for CanoScan N650U/N656U. I have the Vista operating system.
Hello
Canon N650U/N656U Scan is not compatible with windows 7 follow the link below to check the compatibility of the Canon N650U/N656U analysis:
I suggest you to install the Canon Scan N650U/N656U driver in compatibility mode. Follow the steps below to install the driver for the Canon N650U/N656U analysis:
Step 1:
Download driver Canon N650U/N656U Scan from the links and choose Windows XP to download:
Step 2:
After above step install Scan Canon N650U/N656Udriver in Windows vista compatibility mode, follow these steps:
a. right click on the Canon Scan N650U driver fileand then click Properties.
(b) in the Package name properties dialog box, click the compatibility tab.
c. Click to select the run this program in compatibility mode for check box, click on Windows XP (Service Pack 2) in run this program in compatibility mode for list, and then click OK.
d. double-click the executable file to start the Setup program.
For more information, take a look at the following link:
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
-
Canon CanoScan 8400F. No driver available.
No driver available. Is there an updated driver for this device?
Moved from feedback
Original title: Canon CanoScan 8400F
Hi Barbara Donaldson,.
- Which is exactly the problem that you are facing with CanoScan 8400F?
- What operating system is installed on the computer?
CanoScan 8400F drivers are available for Windows go to this link.
After the back if you have any questions.
-
Het expensive Canon CanoScan Lide 60 moet ik een toepassing maken Hoe dat works
IK heb het besturingsprogramma van een Canon CanoScan Lide 60 van site gedownload van, maar ik moet een toepassing maken om het expensive gun you use. Hoe dat works?
IK heb het besturingsprogramma van een Canon CanoScan Lide 60 van site gedownload van, maar ik moet een toepassing maken om het expensive gun you use. Hoe dat works?
Check with your manual Canon CanoScan Lide 60. Search, address, telephone number or Web site where you can get technical support.
If you don't, here is a link where you can start clicking where you are and it will lead you to the site of the Canon Support in your country.Neem contact op put uw in Canon CanoScan Lide 60. Kijk voor het adres waar u technische support location site number.
ALS I niet vinden good, yesterday is een link waar I moet door start you will op waar u bent het zal leiden tot een van uw support site Earth Canon u. -
Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port. Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is. Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7. But the installer does not work.
Windows 7 Professional 32 bit.
Hello Graboots,
Thank you for your message. You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer? You can try using a different cable, for this rule as well. Since it is a question of recognition, we remove the external devices before software troubleshooting. Do you get anything when you plug the printer (ie. a tinkle of connection)? Please let us know, we are looking forward to hear back on your part.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
64-bit driver for scanner Canon Canoscan 670u
I recently bought a new computer with Windows 7. When you try to install my Canoscan 670u scanner, no TWAIN drivers were found. On this site I found and successfully installed a driver 64-bit for this scanner that someone else I work for the same scan in Windows 7: http://www.64bitdrivers.com/driver.php?id=1368
I restarted with and without the scanner is plugged, but I always get the message that no driver is installed. In the device, clicking Properties, on the Canoscan Device Manager: the drivers for this device are not installed. (Code 28).
Any help on how to proceed now would be much appreciated.Hi hmarcuse,.
Your scanner is not compatible with Windows 7:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
CANON Canoscan Lide 500F Scanner USB with Windows 7 64 bit
When I try to operate this scanner by pressing the scan on the scanner, Service Image Acquisition Windows tells me "there is no application registered for this event. The scanner using Canoscan Toolbox is recognized in the select the Source area, but when I press "select" I get "unable to select TWAIN source". I saw a lot of people have already had this problem but I have not seen a solution that works for me.
BTW this mixture of languages bothers me a lot. Although my Windows 7 is installed in English, and although the English (US) is defined as my main input language, some programs insist to settle in French. I guess that's what we call "smart" software Sometimes I hanker after the silly software from the old days. :-)
I would be grateful for any help.
Hello
Please follow the steps below.
Method 1:
Uninstall the printer software.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Method 2:
Download and install the Twain driver from the link below.
-
Canon CanoScan D660U Scanner Windows 7
Does anyone know a trick to use this scanner with Windows 7?
Hello
The link given below provides the information that the scanner is not compatible with Windows 7.
You try to install the Windows Vista driver in compatibility mode and check if it works. If this is not the case, there is no other way that you can make the scanner work.
Compatibility mode:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Hope that information was useful
-
Scanner Canon CanoScan LIDE 200 works, MP Navigator EX 2.0
Canon scanner CanoScan LIDE 200 works, mænd program MP Navigator EX 2.0 is op of hold that work, which has afinstaleret the and gen installed, a God until for a few days ago, there is no Ude which can help with works Igen MIG, pa advance tak
Hello Erik,.
Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:
-
Canon CanoScan LiDE 30 48 bit USB PC/MAC Scanner
Does anyone know of a fix to allow me to use the CanoScan Lidfe 30 with my Windows 7 PC?
There is workaround to VueScan 9
It works well according to this Canon Scanner incompatible with Windows 7, 64-bit thread
Maybe you are looking for
-
In FF10.0 irrational UI behavior
Update: always check each addon, even when they do not change the user interface. Disconnect Facebook screwed up my UI for no reason. After updating Firefox automatically to version 10.0 area superior to the user interface (menu button, tabs, address
-
Hard drive USB - no light appears
Who can help me, since last Saturday, my USB hard drive shows a red LED during data transfer. Normally the led is blue in changes while transferring. Now no light does appear except when transferring data
-
new music from iTunes is easily downloaded from our iPhones on our macs, but does not appear on our computers portable regular windows. What can we do?
-
IMAQ image with alpha (partial transparency) blending overlay?
I'm using Labview 2014 on Win7. I found examples of image color with binary transparency overlay (A + B = OUT with each output pixel is 100% image A or B of the image), but have found no examples of mixture alpha (partial transparency). For example,
-
pc Xbox 360 controller does not work
I just bought this controller and installed. Game hand light flashes and the wireless receiver has no active light power when plugged to the USB port. I have a dell Inspiron that means I have no power to my USB port and can not use this controller, o