Canon EOS 7 d soft images
Hello
I feel soft and dull pictures with my Canon EOS 7 d with a 17-55 mm EFS.
Maybe it's the operator error, but I wonder if the focus of the brightness settings are out of wack.
I expect more tight overall focus. No matter what I do I can't seem to draw on the development. Most of those shots were the focus setting. And the watterfall timer/tripod shots, including the movie shots.
These shootings seem to just bad.
Here is a sample of the settings Auto, P, and M.
See what you think. Thank you
http://chappledesign.com/Canon_EOS_7D/
sparkyj wrote:
Thanks Bob, is this something to be definitively resolved, and it will remain fixed? Have you seen all the links out there that address this specific task for this body/lens combo? I thought that maybe it could be a firmware issue. Or maybe I'm just completely a bad batch of settings will.
It is permanent and stay put unless you reset the unit to factory settings. This will occur if send you the camera to Canon for cleaning and inspection. What I do is so save the settings of the AFMA in a worksheet (cameras on the x, lenses on the y axis), so that I can restore the settings later without guessing or recalibration.
The calibration itself is not difficult, but it can be time-consuming, since it is trial and error. Capitalist companies will try to sell you different AIDS to the process (paper targets, etc.). Most (all?) of those which are unnecessary and should be avoided.
AFMA is described in the operating manual of each device that has it. Manuals for the rest of the cameras argue that there is not.
Tags: Canon Camera
Similar Questions
-
can I know the reason for the change of color in the image - canon EOS rebel T5
Hi, I am using canon EOS rebel T5... Recently whenver I clicked on an image using this device, I get color variation in the image that I've highlighted in the image below... It's because of the lens or the camera settings... Pls help me to get a clear picture
What are compression of camera settings, for example, I use fat with Fine quality
This 478KO scares me, it's really small for a 4000 x 2000 image. You use too much jpeg compression which is ruining the image. You need to set a level of quality JPEG 9 or 10 - it will result in larger images, but as you can see, throw the data has detracted from your images.
If you want to send pictures, decide first the smaller number of pixels you can hang out with and then use just enough of JPEG compression to get the size you want.
-
Canon EOS 600 d producing dark tones of RAW images (.) CR2)
Hello
I'm new in the world of photography, using my Canon EOS 600 d for these past two years. I have turned off later just started shooting in RAW (.) CR2) format, mainly RAW + L. What I see is that all my CR2 files have a blackish tone added to them over the same JPEG formats. All images are all taken in manual mode.
Could you please help me with the below.
- There is a problem with the Canon EOS 600 d model. Friends of my friends with Canon EOS 600 d are complained of the same show.
- If it is not a problem with the camera series, is there a solution ready? By changing some settings or...
- If so could someone please share the same with me in this forum.
- If it cannot be resolved by simple change of parameters in the model of camera, can anyone please provide some resolutions in adobe photoshop, cameraRAW, adobe LightRoom or any other software.
- Discuss about it with some friends of friends who have had recourse to Canon EOS 60 d and 5 d series and none have faced the same issue with RAW formats.
I stuck a few examples below. I was unable to view images of CR2 in this forum, just open images using picasa and taken screenshots and paste as simple images.
Any help will be much appreciated and really useful for me. Please ignore if I am sounds very stupid, I am new in this field.
Thank you
Boissière
I think that Picasa is your problem. All RAW converters are different. Mr. Martin is correct to a point, but most of the converters apply the settings that you have made in your camera in a tag file. This is how a RAW file can even be posted. Otherwise, you can not view a RAW file. IMHO, Adobe is the best RAW converter. It is a view shared by photographers professionals and laboratories. You can certainly use PLR as your RAW converter. After all, it's own Canon, and it's free. But I recommend you get one of the programs Adobe Photoshop Elemets 6 Lightroom or Photoshop full blown.
Even some of the free converters are better than Picasa. GIMPshop for example or Darktable (Mac).
Remember that it is always better to get the right settings in the camera rather than rely on the post to do. ACR 9 will apply these settings for beginners.
-
Images showing red blue spot and they are not sharp at all - Canon EOS 600 d
Hello
A month ago I bougth Canon EOS 600 D with 18-55 mm and 55-250 mm lens and everything is fine I capture images of the Moon and wildlife photography.
But now I am facing a problem with it.
Recently, I tried to capture pictures with my Canon EOS 600 d and suddenly, I noticed that the pictures are not sharp at all and the images show task red and blue. I don't know what to do I'm just an ammature in the present.
Please can someone help me with this problem.
It is chromatic aberration, it's a type of distortion that exists in all optical components to a certain extent, but varies depending on the lens. In general, the less expensive lenses will be more CA, especially something like the kit lenses. You'll notice more in high contrast situations, like a brilliant white on a black background. You can fix it to a certain extent in post with programs like Lightroom or Photoshop.
-
Photoshop CS5.1 is not opening images raw - Canon EOS 700 d
so I have photoshop CS5.1 and I am trying to edit RAW for a photoshoot that images where taken on a Canon EOS 700 d and they won't open in photoshop, he says there is a problem with the Raw image format however the images open correctly in the preview. ??
is my old photoshop? what I need to download something?
This device requires Camera Raw 8.2 or higher. If you need PS CS6 or superior. Or you can download the free dng converter.
-
Importing photos is no longer imports of Canon EOS 20 d
Since the update to IOS 10/Sierra, the Photos is not automatically import photos from my camera. Previously, I would like to connect the camera to the USB port, open iPhotos and he would start the import process. I've rechecked through Capture of Image and importer self that my camera is recognized as a device. I have started and restarted several times; and double checked that my camera (Canon EOS 20 d) is compatible with the Sierra. My camera always does not appear as a device in Photos. Help, please!
Is your camera mode suitable for importation and the batteries loaded properly?
Shooting RAW or JPEG?
Photos see the card, if you use a card reader?
-
1DX Canon Mark II raw no images not show in preview.
I recently bought a Canon Mark II 1DX and the. Raw CR2 files don't sow a glimpse into El Captain. I can open the image in Adobe or LightRoom, but not in native Mac OS preview mode. I have 10.11.4 was last updated on my MacPro to 2013. Anyone else having this problem? Is there a work-around in addition to the opening of each image in Adobe? What's weird, is that Apple Photo program will display the raw image if I wanted to use this program I did not.
Article that you have accessed
RAW formats digital camera, supported by OS X El Capitan - Apple Support
the Mk II of Canon EOS - 1 d X is not yet supported
-
Digital Camera RAW Compatibility Update Canon EOS 80 d
Hello
I am trying to import RAW + JPEG images of my new Canon EOS 80 d in Photos. When I try to choose images-> use BRUTE as the original , I get the following error message:
Cannot switch Original.
Pictures cannot move to the original because the RAW is not supported.
I wonder now if the current version of Digital Camera RAW Compatibility Update includes the 80 d EOS, and if not, when it will be updated.
My version of Photos is:
Version 1.5 (370.42.0)
Digital camera RAW 6.18.1 (831)
Digital Camera Support RAW 6181 (207)
Best,
Chris
I have not seen the 80 EOS D on the RAW supports list - Digital camera RAW formats supported by OS X El Capitan - Apple Support
Support of Canon is generally fast so I hope that with the next RAW update
LN
-
Canon EOS 70 d giving garbeled photos
My new Canon EOS 70 d gives didital garbeled photos. This happens for ~1/20 I took photos. A strange thing about the preview just after a shot of 'bad' looked OK / normal did once later on the camera or download the distorted image appear. Curiously, if a bad photo to save the photo thumbnail to my desktop icon seems OK
Photo Details: 5472 x 3648 pix jpeg
Before contacting Canon it is a problem with a simple solution?
Low level format your sd card and change your way to transfer your pictures from the camera to the computer. If the photos looked in the camera and you can enlarge in the problem is being transferred.
-
Canon EOS 1000 d does not work
Hi all
I have a canon eos 1000 d and the use of the camera for a shot on a 64-bit windows computer 7, everything worked fine until I took a photo and the program has stopped responding. I finished the program and disconnected from the camera, after that if I try to connect the camera to the computer again it starts to install drivers so windows says the device has malfunctioned and was arrested. I tried to connect to another computer and the same thing happens, I also reinstalled the firmware (1.0.7) and has not touched anything. The camera still works fine on its own. Help, please.
If you haven't already done so, I recommend to download and reinstall the drivers from Canon and the software on your computer. I assume you are using EOS Utilities for remote shooting... Perhaps that has been corrupted in some way, on your computer is the main I would update.
If this does not resolve the problem, I try another USB cable and carefully check the cable to the computer and the camera shots.
I hope that this action has resolved the problem.
***********
Alan Myers
San Jose, California, USA.
«Market softly and carry a great lens.»
MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & EXPOSUREMANAGER -
When I download my photos taken with my Canon EOS Digital Rebel XT to my computer, I see they are listed as 72 dpi, but when I download pictures from my small pocket cameras Canon (like my Powershot S410 or ELP 300) they are listed as 180 dpi. It is a function of the cameras, or is it a setting I can change on the rebels to store the photos at 180 dpi?
My second question is: it won't hurt the quality of the photo printed so I manually "resize" the dpi to 180 in a photo program before printing. The vast majority of my photos are just stereotypes that I print 4 "x 6", but sometimes I get a good picture I like to enlarge. "
As you can see, I know very little about digital photography. In the past, I have not even noticed that pictures of rebels were at 72 dpi and the others were to 180.
All the information that will inform me on this subject will be greatly appreciated. Thank you. Mac
If you say that the printer to print a 4 x 6 proof it will not (in general) paid no attention to indications of DPI image. All shots of my XSi are 72 dpi so I printed several pictures on a dozen different places throughout the city and the DPI setting in the image file is ignored in favor of the resolution of the printer and the size of the image. In other words, if the printer only 300 DPI then my impression out to 300 DPI. I've never seen a case where the printer used the DPI setting in the file. I can't guarantee that it will not happen on some printers, somewhere.
But most people don't print that many images in that a lot of places so I suspect that if you are printing a single image at any place printing 'new' you can determine if it's going to go wrong or you can take the time to set the DPI setting on the image with your image editing software. I'm not sure of what you use to edit your images, however, two following software packages allow you to adjust the DPI or print resolution:
IrfanView allows to change this setting: http://www.irfanview.com/
GIMP also allows you to modify: http://www.gimp.org/
-
Canon EOS 10 d no driver available for Windows version 7 or earlier version
I recently acquired a Canon EOS 10 d, but windows does not recognize the camera and as such I can't retrieve the images from the camera
I tried the American sites and support Global Canon but can't seem to find the drivers (even xp / vista for backward compatibility with)
Any suggestions for help would be appreciated.
All I need is the memory card to be talked about while I can even cut and paste the files of it.
Perhaps? - http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/canon-eos-10d-wont-install-under-windows-7/4b4c7996-73b9-4e39-b057-11d668a82d88 can help.
When I chose W7 64 bit on this page - http://www.usa.canon.com/cusa/support/professional/professional_cameras/eos_digital_slr_cameras/eos_10d#DriversAndSoftware - it says ' there is no driver for the OS Version you have selected.» The pilot can be included in your operating system, or you may not need to pilot. »
-
Why can't PSE 14 read a Canon EOS 5 d Mk iv raw CR2 file?
I just bought a new Canon EOS 5 d Mk iv and I both CC 2015 and PSE 14. I've updated PS using CC and LR. LR, PS and bridge now read EOS 5 d Mk iv raw files fine, but PSE 14 has not although he reads very well to pictures of EOS D5 Mk iii.
in PSE 14 help/subject/Camera Raw = version 9.5.0.585 and
Help/updates = your applications are up to date
What should I do to make it work?
ACR there two versions running simultaneously - a PSE 14 and one for LR and PS?
I appreciate any help you can provide.
Thank you
Jim
You say that bridge can read your raw files so do you try a right click on the image and choosing PSE14 Editor? See this picture:
If this is not suitable for you then try this post:
14 elements Camera Raw for the Canon 5 d Mk4 >
Good luck.
-
How to open the Canon EOS M3 Raw files in LR5.7? [Help]
Hello
I don't have lightroom 5.7 purchased outright, to pay each month and use windows 8, I updated the update of raw and dng to version 9.
I bought a canon eos m3 and shoot in raw and lightroom will not open them they are cr2 files, read I need lightroom 6 or later version is this correct as all my other canon DSLR digital raw files open very well?
Neil
Sp1dey85 wrote:
Hi thanks a lot
How do these things? If you could advise would be gratefull
Thank you
Google Adobe DNG converter 9.5.1.
Download it from the Adobe website and install it. Copy your images to a folder on your hard disk that you create. Probably in the same folder structure all your images are stored in. By default, which would be under your user name > images folder, but it can be anywhere and any name.
Run the converter program and point to this folder, look through all the options of the converter program and choose those that are best for you and click on the button to convert.
-
I have a Canon EOS 7 d Mark II. I would like to shoot RAW files. Is there a version of PS that I can use to adjust the CR2 files without having to adapt to DNG files, first?
Hi Nesta,
This camera requires Camera raw 8.7, versions of Photoshop CS top ^ (latest) should be able to process raw images from this camera.
Recommend you go with the last a Photo collage software | Download the free trial version Photoshop CC
Kind regards
Assani
Maybe you are looking for
-
Excel attachments are opened by numbers. How to change that?
Since the last update of El Capitan, Excel attachments to mail are opened or attempted to open in numbers. How can I change which runs by dragging the document into the Excel application in the dock?
-
I had someone call saying they were Yahoo, and one of my email addresses sending scam messages. They also showed me where my event log showed several errors and where many of Microsoft systems have been arrested. I just discovered Bob Headrick, in an
-
My starting comes with directx 10. I downloaded a demo of the game and installing told me that you had to install directx 9 and that he would remove all previous versions of DirectX. Does this mean that I now have DirectX 9 and directx is devastated,
-
I just noticed that when I click on MY DELL on the 8.1 Windows splash screen, I get: "License authentication failed. This version of Dell Support Center is not authorized to run on this system. " I think it started after the update of Windows 8 to 8
-
WebVPN, several portals, multiple SSL certificates
I have installation WebVPN with SSL on an ASA5510 certificate that works very well for a while. However, we need to have a second gate on the same machine. I configured this with the use of the instruction of group-url in the tunnel-group. Now I need