Canon i860 series Desktop Photo Inkjet Printer could not be installed

Original title: Inkjet Photo Canon i860 Printer series Desktop

Installation of Canon i860 Canon inkjet printer CDROM has a compatibility issue with Windows 7 Home Premium



·          What is the problem you encounter when installing the printer on the Windows 7 computer?

·          The same happens when you try to install from the same CD on another computer?

Download the latest driver from the link below, install and check if this helps solve the problem.

Hope that information was useful

Amrita M

Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • HP software detects the printer, but then "the printer could not be installed on the network.

    I tried looking for a similar problem, but have had no success yet.  I doubt I'm the first to this problem!

    The computer is XP SP3, is printer Deskjet 3050 has, and it's a WiFi WPA - PSK.

    The printer confirms that it is connected to WiFi.

    When I run the tool on the computer, to the point of network configuration check, the installation software detects the printer with the correct IP address.  It's the only thing he discovered.

    I click Next, and after a minute or two, I get the error "the printer could not be installed on the wireless network" click Retry to try reinstall the printer on the network, or click Cancel to return to connection options.

    This just cycles with no progress.  I have disabled the Windows Firewall and also disabled the AV.  No change.

    I can access the interface web printer - but still cannot install the printer.  It is listed in the printers and faxes as being offline.

    I'll try removing it again and add new-but-that someone has encountered this problem before, please?

    Well, my problem is almost solved. I uninstalled the software and then downloaded the software of the printer on the HP site where it is more recent than what was on the CD... and it's fixed!

    I can print wireless!

    Cannot scan, the printer gives an error, but that's OK for now.

  • I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

    I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

    kareng44985000 wrote:

    I have Photoshop elements 13.  I got a new printer Epson XP-960.  When I tried to print a photo I received a message: default printer could not be opened.  What now?

    This is a known bug. Here's a tech note:

    Printing with Photoshop elements 13 errors

  • Photosmart 6510 "the printer could not connect to the server.

    Hi all.

    Just try to find this sorted hope someone can help.

    I am able to print irelessly of all our devices with no problems at all.

    However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

    I use an Imac with airport wifi router.

    Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

    Thanks in advance.

    Let's define an external static IP and DNS address for the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is a.200.  We use for your printer.
    -Apply the subnet (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS and for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • HP ENVY 4500: Error: the printer could not print

    After a saga of long hours to get my new 4500 DESIRE to produce a readable text, I finally have a wonderful clear text, but now realize a new problem: the printer stops at Midway through each second page and it spits out just with the white background.

    An error message appears briefly in windows that said "the printer could not print. If I click on it there is no more details. It seems that windows stops just sending information to the printer. My print spooler service is running and we are within 5 feet of the router with a strong bond. I did everything I can think of including updating the firmware and driver.

    Any ideas?

    Thanks for your suggestions! However, most did not address my problem. I ran the Print and Scan doctor before posting this thread, but it found no errors. I was unable to get any additional details about the error.

    SOLUTION: I found a solution after reading this thread. I've updated Windows 8.1 a few weeks since the last time I had the printer works. I've updated Windows again today and the problem immediately went away.

    Although I couldn't see everything concerning him spool printing or printer in the update drivers, it seems that the bug was caused by a Windows Update, and subsequently fixed by another update. I was able to print a 40 page document and several page 5 those without any problem, when before it was bad, making it through several pages before he died. Fixed!

  • OfficeJet6500A more - ePrint Setup error - this printer could not connect to the server

    My 6500 a is connected to the internet and I am able to print wireless.

    When you try to set up ePrint, I go through the following menu path: installing, configuring Web services, the printer email address.

    I get the message error "this printer could not connect to the server.

    I have read and tried the others 'solutions' on the plate that involved turning market eprint, crossing out-lit power cycles, turning wireless on and outside, turning on the printer and wait 5 minutes, restoration of factory settings...   Nothing works.

    Any ideas?

    From one day to the next it printed the ePrint address, so I guess that the problem was with the HP sever.

  • Trying to send emails through my scanner/printer and my window that educated told me that program file could not be installed or to load and go to the Help menu under 'detect and repair '?

    through my scanner/printer and my educated place window tells me that program file could not be installed or to load and go to the Help menu under 'detect and repair '? I need help with this


    you say not what e-mail program, you use!

    It takes a lot more information


    see if this applies:

    Looks like you need configure Windows Mail

    you need to configure your e-mail account windows mail with your ISP internet service provider

    They provide you with account settings you need to do

    Ask them to

    password for your access broadband account / distance with them

    Server of incoming POP3 mail
    outgoing mail SMTP server

    and here's how to configure windows mail after getting the email correct account settings

  • SE error message: printer could not be removed. Error 0x000006be"and new Kodak 7250 printer do not print

    Original title: new Kodak 7250 printer print a vista computer

    I'm trying to help my brother who lives in another State set up his new printer Kodak 7250.  After you install the software it is plugged into the USB port.  Vista has detected new hardware and did his thing, and everything seemed good.  However, it would not print from the computer.  The printer is listed and selected status, however, stated that it was not connected.  We contacted Kodak tech, they take control of his computer.  They have tried to delete the printer but could not... "Printer could not be removed... Error 0x000006be ".  Tech said problem wasn't Kodaks and contact Lenova on bad print spooler.  We checked the print spooler, which was running and in auto mode.   We tried several times to remove the printer and start over, but shows the same error.  Any help from anyone would be appreciated.  BTW, her worn old HP printer had no problem.

    Hi vbrown7,

    You can try to let flow the Fixit and see if it helps:


    Problems of print and error - a Mr Fixit of printing

    Solve printer problems - a Mr Fixit

    Also see the article and check.

    Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»

    You can also check out the following link and try the steps suggested by Arthur Xie Microsoft, Moderator on Monday, June 1st, 2009 09:39

    1. you use an administrator account?

    If this isn't the case, then you should use the administrator account and check.

    Also, try to create a new administrator account and check if the printer is able to be viewed / deleted.

    Check out the link:

    Create a user account

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Want 4500: Connection error! The printer could not connect to the server

    Connection error! The printer could not connect to the server!

    Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

    I am successfully connected to my router and can print from my pc and my ipad with airprint.

    PC "will not find"the printer either for purposes of updating

    What I need to change the DNS. If so, I don't know what it is or how to do it!

    I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

    Can anyone help?

    Very frustrated customer :-(

    Hi @roopuk,

    Thanks for getting back to me.

    Sometimes the manual DNS / won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

    Manual preferred DNS Server:
    Auxiliary manual DNS server:

    If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

    What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

    Here is the information that you need for your provider service to open ports on your router/modem...

    -Multicast must be enabled
    -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
    -Mac filtering should be disabled
    -Also, make sure that your router's firmware to date if
    - The dmz on the router mode and turn it on to the printers IP address: _

    Ports to open are: Eprint and Apps

    Incoming Ports.

    Outbound ports

    Once they are open, you should have no problems connecting to services web eprint on your device.

    I would like to know how it works for you.

    Kind regards

  • My Epson stylus photo R1800 printer will not install and keep driver error 28 has not been installed

    Original title: my Epson stylus photo R1800 printer does not install. I get error 28 driver has not installed... I need help that I have tried everything I can think...

    I had one installed R800 and I used it for about 2 hours. Then he disappeared. I tried everything to reinstall it and no luck (error 28) now, I've upgraded to R1800 and same problem... Someone had the same problem?

    Hi Roy,

    I am sorry to say that the Epson Stylus Photo R1800 printer is not compatible with the Windows 7 operating system.

    I suggest you to check the system requirements for the printer from the link:

    I also suggest you to install the drivers for the printer in compatibility mode and check from the link:

    Make older programs run in this version of Windows:


    For reference:


    What is program compatibility? :


    If the problem persists, then I suggest you to contact support Espon from the link:

    Contact Epson Support:


    If you need further assistance on this topic, let know us and we will be happy to help you.


  • Cannot install add-ons in Firefox 4 "[Add on] could not be installed because Firefox failed to modify the necessary.".

    I tried to install add-ons for Firefox 4, but were unsuccessful.

    If I try to install inside the about: addons, the add-on will download, but then the installation bar will not change.
    If I try to install from, the add-on download but then I get a message in the info box on site (at the side of the address bar) which reads, "[module] could not be installed because Firefox failed to modify the necessary."

    If I try to install any other modules after that, I get an error.

    I'm under Ubuntu 10.10 on a Toshiba Satellite U400.

    On config variables xpi: enabled = true.

    I'm having this problem. I am also under Ubuntu 10.10 and Firefox 4.0 (Canonical version 1.0) 32-bit.
    When I try to install the Greasemonkey addon (and other addons), it downloads, but the installation progress bar remains at 0%. I can not also cancel installation. If I try, I get the error:

    Error: Cannot cancel install of of that State (5)
    Source file: resource://gre/modules/XPIProvider.jsm
    Line: 5168

    When you try to install, I get this error in the error console:

    Error: this.installLocation is not defined
    Source file: resource://gre/modules/XPIProvider.jsm
    Line: 5751

    I read on the troubleshooting page of Firefox that xpinstall.enabled should be set to true in the configuration: about, but there is not in my list of config, so I tried to add it, but it made no difference.

  • "The update could not be installed." What should I do?

    Whenever Firefox try to update I get a message that says "the update could not be installed. Please make sure that there is no other copy of Firefox running on your computer, etc... "The task manager says there is no other copy of Firefox running, and there are not yet all copies of Firefox running on the anywhere network. When I click on X or OK it just runs through the same cycle and I get the same message. This happens to every update until I have download the new version and install it on top of the current installation. I continue to wait for the bug with the next update, but he continues to be. How to stop this behavior, or can I just give up on Firefox and the use of Chrome or something? It is becoming a major pain in the neck.

    See (Software Update doesn't work does not correctly)

    Delete the files in the folder updates\0 and updates:

    C:\Users\ < user > \AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)

    Do a clean reinstall and download a new copy of Firefox since and save the file to the desktop.

    Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.

    Do not remove personal data during the uninstallation.

    It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    You can skip the step to create a new profile, which is not required on this issue.


  • Error code 646: I could not successfully install an upgrade (upgrade of security for WORD 9, # KB2092914)

    Since 12/08/10 I could not successfully install an upgrade (update of security for WORD 9, # KB2092914.) Six times I haveEncountered Unknown Error Code 646. Any suggestions? I have Windows 7.  Thanks you


    It is a Microsoft Fixit who will help with this issue.

    You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
    Office updates

    Check this thread:


    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates

    The security updates, you can get free support Incident report

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I am running windows vista and my solution Center tells me that my printer is not completely installed

    I re-installed the printer (photosmart all-in-one B209a) and I get a message every time I try to access the center of solution that my printer is not completely installed. In addition, the HP does not appear in my program menu. Help!

    Hello Gordon,.

    I want to thank you for all your help. It has been very frustrating for me to not be able to solve this problem. However, with your help, I learned a little. As I mentioned previously, I am not savvy in computer science.

    The installation that I downloaded from the HP site seems to be useless. Fortunately, I found my installation CD and was able to successfully install it with the CD. I now have my rear HP Solution Center, and everything seems to work well. No message more that it has not been installed correctly or the pilot is missing.

    I did however, buy another printer. So I have now two printers. If I am given the penalty, I can use the other until I understand what could be the problem.

    Once again, thanks a lot.

  • 'AIR App' could not be installed via iTune sync with Flash Builder 4.6

    Hi all

    After download and installation of Flash Builder 4.6 installation fees, I begin to create a simple Mobile project and run as fast build configuration.

    I got an IPA file, so I added my iPad to iTune, connected and synchronize the app.

    Surprisingly, after synchronization is complete, iPad shows a pop up: "App name" could not be installed. This also happens with the iPod touch too.


    I use:

    • Mac OS X Lion 10.7.2
    • latest version of XCode.
    • file of certification and supply of iOS which can be used in a preliminary version of 4.6 and 4.5.1

    I must tell you that I do not have something special in my project, just one button, a list and photo.

    Could you help me solve this problem? It could be a bug or might happen to another.

    Just resolved.

    I found the way to solve this problem is to create new file certificate and mobile delivery of iOS developers portal and the re - install in iTune app.

    I'm not sure on the origin of the problem, but I suspect the XCode and iTunes update. I've updated between them 4.6 FB pre-release version and full version.

    FYI, I found all my AIR application which built with 4.6 pre-release does not settle in the iOS via XCode device too.

Maybe you are looking for

  • Satellite A100 - cannot get an Internet connection

    Hello I have a Satellite A100 and I can't connect to internet after seeing my reg / cleaned by uniblue, and for the love of me can't get a connection. I eat to get my hub connected to the internet, but my laptop just will not allow connection, it's a

  • Driver Chicony webcam does not work on the Satellite A200-13O

    After the misfortune that occurred to my webcam, I tried to fix it by uninstalling the driver and then put it back in place (by the toshiba Web site).I did this twice and it does not work,allthought the pc installed the driver, the camera was not wor

  • Windows 8 EliteBook 8460p chipset driver

    Hello people, Recently, I upgraded my (XUO58UT #ABA) HP laptop Elitebook 8460p to Windows 8 Pro 64-bit. Since upgrading my laptop now has former Microsoft drivers installed for the Intel Core i5 processor. I'll try the Intel Download Center, but I wa

  • Dispositivocamera meu notebook EAC

    Desde instalei o windows 8 em meu note I can not usa - la

  • Problem with the Gantt chart

    I have an Apex 5 with universal theme helpI want to create a Gantt chart, but I get a syntax error, even though I used the wizard to generate the codeSelectnull link,NAME task_name,Task_id ID,parent_id null,Start_date actual_start,End_date actual_end