Canon MG6150 print using USB but no wifi. WiFi connection is OK

Printer is connected to the network but is "not ready". If the printer is reinstalled then it's ready and will scan and the printer status screen is active but it freezes and will not print. Turn off and on again once there is a WIFI connection but printer is 'not ready' initially, it worked perfectly, but I used the USB for a job, and since then, I have had this problem.  I checked the firewall and this doesn't seem to be the problem.

Sony VAIO VPC-EB1Z0E Windows 7 Extreme

NETGEAR DGND-4000

Any suggestions will be welcomed.

Donald

I just installed the latest driver for MP who cured the problem. Choose just the WIFI connection turned out to be the solution.

A big thank you to anyone who was trying to help.

Donald

Tags: Windows

Similar Questions

  • BlackBerry smartphone Bold 9780 cannot use BB browser when wifi connected

    I recently started using a new BB Bold 9780 (BB6).

    It of a beautiful phone... and navigates very well with GPRS / 3G.

    However, if I turn on wifi, (connected to my home wireless router) the browser does not at all.

    "Cannot find the requested server.

    I have a Netgear router and it is very good for other devices.

    BB 9780 wifi session is set to WPA

    I have a dataplan with Virgin.

    I conclude that the wifi does not work and it would be very disappointing... and sounds weird!

    When all sales representatives say that he is an active wifi device.

    Does anyone have any tips or tricks?

    I was wondering if Opera 5.1 might help - but the opera died when I tried to launch it!

    Thank you very much

    Chrism

    Well, I finally fixed it.

    My BB was not able to connect to my Netgear router, but it could connect with happiness with the wifi of my neighbor.

    I turned off the WMM security setting on my Netgear router advanced setting Panel.

    Bing, the BB is now wifi.

    Result.

  • Cannot use internet, but I am always connected (vista) when gf windows 7 computer

    Cannot use internet, all the time out of pages, but I'm always connected to the internet (vista)

    occurs only when the computer windows 7 gf is connected.
    Will work if connected via hardwire tho
    No sense?

    Hello MikeQuigg,

    Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

    Take a look at step 6 in this article. He further explains this problem as possible:

    http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

    If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

  • Designjet 500 prints on usb but not ethernet

    I inherited a DesignJet 500 printer 24 in. I can print so that I am related to him by a USB cable but when I try to set up on my network, I can't print to it across the network.  I can ping the JetDirect card and can telnet in as well so I know that I have the correct IP address and it the card itself can communicate with my network.  I use the same driver via the USB port and the network port but still unable to print over the network.  Any ideas why I can connect to the printer on my network, but I can't print on it unless I connected locally with a USB cable?  I tried with a laptop running XP32bit and Win7 64 bit with the same results.

    Thanks for the help.

    Thanks to the entrance to the Forum of commercial products.  BTW, I discover to my problem.  It looks like the problem was the cable used to connect to my network.  One of the things that I should have checked first, but don't have.  After replacing the cable, I was able to print from the network to it.

  • try to use the old printer using usb/parallel converter cable

    trying to connect printer to computer hp 940c hp laptop pavilion via a USB cable conversion... windows vista

    Hi Doug,

    The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

    1. What is the exact problem you are facing the computer?

    2 do you have problems with the use of 940c on the Windows Vista computer HP printers?

    3. do you get an error message/code?

    For your reference:

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Response with more information to help you.

  • Mac OS x 10.7 Lion prints with USB, but not wireless

    Hello

    Printer works wirelessly perfectly before the Lion, but after installation worked when connected with USB.  Rest of the Wi-Fi works very well, including my Macbook and portable woman with his printer.    Any ideas?   Thank you

    Can anyone other printing to the printer on the network? What can happen, is that the usb printer can be the default printer on your mac. Try to print and scan, remove the printer with the sign less bottom left, and it readd with the most. For the wireless, you find the Hello connection to add.

  • Replace the Canon MG4150 printer color cartridge, but now it will not print

    After having inserted a new cartridge color, printer doesn't print and screen says "treatment - please wait momentarily.

    Have you tried Turing the printer power switch and replacement of the cartridge? Have you tried a different cartridge?

    This is an original Canon cartridge?

    Since I can't find any reference to your problem on the Canon Web site, I suggest that you only contact Canon to get advice here:

    http://www.canon.co.uk/Support/Consumer_Products/contact_support/Index.aspx .

    (or your global region from Canon's site)

  • Portege R700-1DH - limited using Win 8.1 WiFi connectivity

    Hi all

    We have improved some R700-1DH (PT310E models) 8.1 of Windows machines, the without wire may work very well for a day or two, but then it will get limited connectivity regardless of the network to which it connects.

    To resolve this problem, the driver must be uninstalled and deleted, and he re - installs the version of basic available in the operating system.

    I later updated from the page of downloads for this model on the laptop, the information page for the driver for wireless States the following:

    Intel Centrino Advanced-N 6200 AGN
    Providee: Intel
    Driver date: 16/08/2012
    Driver version: 15.5.0.43

    Everyone knows a similar problem, or if it works for you, what version of driver/date you have installed?

    Thanks in advance

    First I would recommend driver you to download and install the latest WLan Intel® Centrino® Advanced-N 6200 from Intel download page:
    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23726

    Second, check out the Microsoft solution proposals:
    http://Support2.Microsoft.com/?scid=kb%3ben-us%3B928152&x=6&y=9
    You will find a step by step instruction how disable energy saving and increase the performance of the WiFi.

    Las, but not least, you should try different WiFi 802.11 standard was / B / G / N and encryption (WPA / WPA2 TKIP AES) and different channels 1-11

    Channels provides a frequency different (2412 Mhz 2462 Mhz) and perhaps that is the reason for some and problems of performance between the router and wireless network card
    http://en.Wikipedia.org/wiki/List_of_WLAN_channels

  • FP 6700: Hp 6700 loses the wifi connection

    Guard 10 Windows printer Hp 6700 lose the wifi connection that requires powering off the coast of the printer running and the cable/modem.  I tried the suggestion given in the forum, but does not solve the problem. The printer is located in 2 feet of cable/modem D5001 model pace and I have the latest software and firmware installed.

    Anyone have any ideas on how to solve this problem.

    Thank you.

    Move the 6700 further pace or connect an ethernet cable to the rhythm of the 6700.

  • wifi connectivity limited after that windows 8.1 update on Z580

    I'm on my phone that I type this because I don't have internet access on my ideapad (again)
    I updated my drivers Lenovo has kindly put on their download site for (downloaded via my smartphone) 8.1 Windows Update but I still have the same problem. I've scoured the web for solutions, I made cmd, uninstall the drivers in safe mode... nothing works!

    Does anyone else have this problem? Would really appreciate a solution if you have

    Thank you

    Jacob

    I fixed mine! What a relief.

    I have Lenovo G580, who has the Broadcom 802.11n network adapter.

    At the point where I had problems (do not already know) Windows has been configured to use the Microsoft driver for this device.

    Following the advice to look at older drivers, I have found a Broadcom provided on my computer and updated driver to use. Immediately, a WiFi connected, and all seems well.

    Here are the instructions:

    # Open the Device Manager (search Windows help if you don't know what it is)

    # Select "Network adapters", and open (double-click) Broadcom 802.11n network adapter

    Pilot # go to the tab and click the update driver... button

    # Select 'Browse my computer for driver software ".

    # Select 'Let Me pick from a list of drivers for devices on my computer.

    # Select the entry "Broadcom 802.11n network adapter (Broadcom)" from the list and click Next

    Well, it worked for me.

    Good luck, Matt

  • HP 8500 replaced, software does not detect printer even though I can't ping / connect to the web interface

    Windows 7 Pro 64

    Reference Dell

    Printer connected via ethernet

    software worked well until the printer has been replaced by HP under warranty

    in the new device, the screen of the wizard to set the time/language etc.

    Software HP does not detect the device and so I can not use all the features.

    I can connect to the printer via IP and also tried to put the TCP/IP port with printer static IP. Can I print using this, but the software "suite" does not detect the printer.

    Removed all software, cleaned the registry, removed the IP port, re-installed the software, does still not detect printer.

    Installed HP printer diags and it passes all the tests, but the suite software HP will always be NOT detect printer.

    Tried without firewall, tried with, still can ping printer, connect to the web interface, the static value, always the software does not detect the printer... so whats left to please other than an another replacement warranty which is used to solve the problem, as it is definitely bad coding in the suite.

    I also tried downloading drivers/full later on the HP site.

    Note that all windows updates are met, reconstruction is out of the question that it is a machine of the company and would almost take me 3-4 days to replace all the software on it (Sage, DW, COFFEE, HMRC).

    Hi-Dillion, Declan
  • Canon MG5650: Canon MG5650 printer/scanner that can I print using the wifi but HP spectrum says I need to connect to analyze

    I have a HP spectrum 13 and we operate a wireless LAN at home that includes the Canon MG5650 printer/scanner. The connection between the two devices works very well generally. I can still print without problem. Today, I am not able scan - the laptop says that I need to connect to the printer to be able to do, but I am well connected via wifi, I can print.

    I turned off the laptop and rebooted. I stop the printer and restarted. No action produces a change.

    The printer is conducting the analysis. If I perform the scan at the printer operation, the scan is successful and the printer sends the document scanned to the laptop of my wife - it's the primary printer that will recognize the cannon.

    This was not a problem never before.

    I would appreciate any advice on next steps to solve the problem.

    Thank you.

    Tony

    Eventaully problem solved by adding a new application on the Canon site on the desktop and removing the old app scan supplied with the laptop. It does not explain why the problem occurred in the first place but provides a "fix."

  • can scan, but can't print using Windows 7 and Canon MG6120

    Windows 7 64 bit, Canon MG6100 printer/scanner

    Suddenly I can not print, but I can still scan so I know that the printer can see my laptop on the network. I get an error ' printer does not.
    When you try to print anything.
    He worked for a year and suddenly stopped working. Two other computers also running Windows 7 64 bit on our wireless network can print.
    What I tried, but nothing worked:
    -powered by bike all several times, including modem cable box router Linksys, laptops, printers
    -deleted and reinstalled the drivers twice
    -Run the troubleshooter who recommends adding printer for collective habitation I did
    -removed the queue print jobs to fail
    Nothing else seems to be a problem with my laptop or the network.
    Ideas?

    For some reason any McAfee firewall started blocking the print spooler. I allowed outbound access and I also added the IP address of my printer and I can print now.

  • Photosmart 7510: 7510 printer recognizes usb connection NO wifi

    I don't use USB wifi printer. I can't find a way to make it READY, it shows offline.  I looked for the settings, but it seems that all are related to the WIFI

    The printer appears as my default on my laptop.

    Hi @Jpryseski,

    Thanks for dropping by the HP's Support Forums! I see your HP Photosmart 7510 is showing "offline." You use the Windows 7 operating system with a USB connection.

    Please continue troubleshooting here: printer is offline (Windows)

    What are the results? You are now able to print to your PS 7510?

    Please let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

  • Differences in use vs. Canon Pro-10 Wireless USB connected

    To test my new Canon Pro-10 I have connected via the USB port, last night and printed with it.  The Quick Menu was "compliant" with all the bells and whistles that are showing in the 'corner' box  When I printed it gave me a lot of options for quality and the media - various types of paper, including Canon paper and other documents.  Now that I have connected successfully wireless, my paper options are limited to "photo paper" and "plain paper" and the corner box has only a few icons in and I get a message that a driver is missing for the Quick Menu.  I have re-installed Quick Menu on the Canon site and I still get this message.  Impressions, that I got last night via a USB connection were good - a bit dark but good quality.  I had chosen "another matte paper" because it was a brand of third parties.  Today, I used the same paper and printed one of the same images and it was greasy and completely unusable.  I went to Canon paper and print the same image.  It was much better, but way too dark to use.  I can probably modify the image to fix it, but I wouldn't not to...

    VERY pleased with my Canon experience so far - use an Epson for 8 years, thought it was time for an upgrade and I wanted wireless due to constraints of space around my office.  I would not wait for wireless quality photo prints?

    I have three of these printers in this line.  The 9000, 9500 II amd Pro-100.  Not a Pro-10, however.

    They are all printed differently, but after a bit of tinkering with settings, they all did very well.  They are great printers.

    First of all you do not leave the printer defined anything.  Cut each little out of control there.  You can do it with the Canon My Printer the printer settings tab.  Do you know how?  I think, Yes, for the moment, but if you don't come back to me.

    Secondly, you must have your photo editor to manage all settings and corresponding color.  You know how to do this?

    And finally, it is essential that you get some settings on your monitor which corresponds somewhat to the prints.  Your printer can do exactly what you say to do, and you don't know, it's because your monitor is turned off.  If you don't do this step, you can forget the other steps.  However, there are only a few things that must be addressed.  You don't need for any fancy additional modules to do this.  No also added or gadgets, etc.

    But you must get very narrow gray-scale.  You must get very close brightness and you must close contrast.

    Once you do these things, you can make adjustments to your impressions by looking at just your screen.  Because you know that the monitor and printer are on the same level.  Another point, you cannot get a printer to print all colors exactly as you saw.  It is not possible because all the colors and adjustment in effect all the others.  My goal is to get the right tones.  That's what notice more.

    For example, I know that my most recent Pro - 100 tends to print darker than what I see on the screen.  So I automatically know to set it's prints a stop brighter in Photoshop, in my case.  It also prints with a warn a little tone.  Most of the time, with in particular, protraits cela if OK, but sometimes it is not.  In this case I set the 'temp' slightly cooler setting in PS.

    Make sure that you have the correct ICC profile and that you are using Canon brand ink and paper until you get well with the printer.  Very, very important, otherwise you don't know if the printer does exactly what you say it or not.

    In addition, use the USB connection until everything is just right.  You just add another problem when you try to configure printing a nd the wireless at the same time.  As the use of Canon branded products until it is gone.

Maybe you are looking for