Canon Pixma MG77678

Similar Questions

• Canon Pixma wireless scanning with MBP 10.11.6 mg3220

  Suddenly, from one day to the other, the scan wireless function no longer works between my MBP (OS 10.11.6) and the Canon Pixma MG3220 printer/scanner. I downloaded the driver of Canon more up-to-date, but eliminating the possibility of using the Image Capture.

  How to restore the wireless function? Is it possible to uninstall this latest driver and reinstall the driver of the Mini Master of Canon, good through 10.8 OS?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

• El Capitan is compatible with Canon Pixma printer?

  The new Mac OS is compatible with Canon Pixma printer

  It is compatible with my 3 printers Pixma Canon's (MP830, MX922, Pro9000)

• I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.

  I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.  It prints very well I can't scan and save.

  I can't find the printer drivers specifically for Yosemite on the Canon website.  How can I get this analysis and save them?  I have never installed this printer on my iMac.

  Have you tried the Applications/Image Capture or VueScan?

  VueScan

  VueScan FAQ

• Unable to connect w / Canon Pixma MX860 printer now I ElCapitan.  Need to print today... any suggestions?

  Just upgraded to El Capitan and now cannot connect with Canon PIxma 860 and not financially able to buy a new printer... no workaround solution suggested?  Canon has written is not compatible with El Capitan.  I have to get off at Yosemite?  Thank you.

  http://GIMP-print.sourceforge.NET/MacOSX.php

  This link should make your printer work again.

  That said, I've not heard of Captan El is not not compatible. But this fix should work.

• To use Canon pixma MG2900 printer wirelessly

  I bought this printer and I am able to use it via USB, but I would like to use wireless. It came with a CD, but my laptop doesn't have a dvd on the subject player. Except for the purchase of an external dvd drive, is there a site that has the content where I can download it?

  Thank you

  Kathy

  Moved from the community involvement Center

  Original title: Printer Canon pixma MG2900

  1. what version of Windows?

  2. If the software on the drive to set up a wireless connection to the printer,

  You should be able to download the same software of Canon

  http://www.USA.Canon.com/Cusa/support/consumer enter your printers

  the model name and search for drivers and downloads.

  Don

• Computer can not find scanner Canon pixma mg2550 printer

  Ive perchased today that precedes, but my computer won't find.

  installed and run the installation disc.

  no site ive found don't yet recognize this printer.

  my previous hp printer was not a problem.

  the only thing I mentioned, is the drive of dvd/cd said: 0 bytes to the left of 450?

  can someone help please...

  Moved from Community Participation

  Original title: canon pixma mg2550 printer scanner

  Contact Canon support through their website to see if they can help.

• CANON PIXMA MP160

  I just bought a new desktop PC HP S5 - 1435D.

  Have connected the Canon PIXMA MP160, but cannot print documents.

  I just bought a new desktop PC HP S5 - 1435D.

  Have connected the Canon PIXMA MP160, but cannot print documents.

  Hello

  Hello

  Step 1: Check with the manufacturer for the latest Windows drivers for the device.

  Canon USA: Support & drivers: PIXMA MP160 #DriversAndSoftware:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp160#DriversAndSoftware

  In the drivers and software section, use the drop down menus to select your operating system and version.

  Expand the menu to link drivers and installation instructions, see the download.

  Step 2: If Canon does not have Windows 8 drivers available for this model, check the drivers that are available for previous versions of Windows.

  If these documents are available, install the driver in Compatibility Mode.

  1. download the driver for the previous version and place it on your desktop.

  2. right click the driver installation file and select Properties / Compatibility tab.

  3. place a checkmark in run this program in compatibility mode for.

  4. in the drop-down menu, Select the previous version of Windows.

  5. click apply / OK.

  6. right click the Setup file and select run as administrator .

  Step 3: If none of this does not work, check with the support of Canon or the support forums of Canon for people who may have found a solution.

  Canon U.S.A. - Support Contact:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon user Support Forums:
  http://forums.USA.Canon.com/

  Concerning

• is driver for canon pixma mp800 included with windows 8?

  is driver for canon pixma mp800 included with windows 8?

  Bring out of the canon site

• Canon Pixma iP1700 reports a paper jam

  All of a sudden my Canon Pixma iP1700 does not feed the paper in rolls.  It seems to be a blockage on the right side of the roller.  It keeps telling me there is a paper jam, but I know it does not exist.  The printer worked fine until this week.

  Hello

  (1) have tried to update the printer driver and check if the problem is resolved?

  (2) I would also like to know what operating system you use and if all changes made on your computer before the show?

  If the drivers are up to data and there is no problem on your system software, you will need to contact the manufacturer of the equipment and get the printer checked.
  Please click on the link below to check how to contact the hardware manufacturer support.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1700#ServiceAndSupport
  Also, check the link below for the resolution of the printer problems in Vista.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  This is true for Canon Pixma iP1700

  http://www.Canon.ie/support/Consumer_Products/products/printers/inkjet/PIXMA_iP_series/iP100.aspx?faqtcmuri=TCM:24 - 604147 & page = 1 & type = faq

  Hope this information helps.
  Concerning

• Help the printing of the Canon Pixma Pro 100 size problem.

  Hi all! Quick question - can I print on a map of 3 x 4 with rear feeder of the Canon Pixma Pro 100? The guide used even close than smaller ones. Well, there must be a way... right? Thanks for any help!

  Display multiple and trim.

• Canon PIXMA MX922 printer will allow no 2-sided Word documents

  I just installed a new Canon PIXMA MX922 printer to replace an old MX882.  Everything works fine and I am able to print on both sides documents from web pages and e-mail by checking the 'duplex' box on the menu drop down print...  However, I am unable to both sides print all Word documents.  No check box 'two-sided' descend, and no "duplex" option is available, as it was with the MX882.  I never had this problem with the old MX882.  Can you help me?

  Thank you very much.

  Hi LonnieC,

  To set the option to print double-sided on a Mac, please open the printer driver:

  1. Select layout... in the file menu of the application.  The Layout dialog opens.

  2. Select print... in the file menu of the application.  The Print dialog box opens. In the print dialog box, you can set the paper type and print quality for printing.

• Canon pixma PIXMA MX459 and mx452 the same?

  Canon pixma PIXMA MX459 and mx452 the same?

  Thanks for the reply. I bought the MX459 and thought that I had an outdated model.

• Canon Pixma MP800 printing problem

  I use Windows XP Professional.  I have a Canon Pixma MP800, who has been a very reliable workhorse for many years.  Right now when I print a Word document using a black ink only, it is printing in the layers of alternative 1 cm of the impression of light and darkness which looks like that I chose to print alternatively in "BOLD" and normal print.  When I print the same Word document using colors, it prints very well.  I tried to do a nozzle check, cleaning, and a clean, none have worked in depth.  I also removed the print head and cleaned in a solution without success.  All ink cartridges are full of ink.  When I do a test print, the top of the marked test PGBK page, displays the first cm to cross the lines perfectly, but the second cm vertical lines of lines alternating with areas of verticle.  Printing from Excel has the same problem.

  Someone had this problem?

  Looks like you have tried all the usual suspects.  It's time to contact Canon support; It is not a Windows problem.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp800#ServiceAndSupport

  Other possibilities:
  http://www.fixyourownprinter.com/
  http://www.nifty-stuff.com/forum/viewforum.php?ID=4

• Canon Pixma Pro - 100 prints very dark

  I see that it is a recuring with the Canon Pixma Pro-100 problem, but nothing, I found an online help I ask and hope someone can solve this problem for me.

  Just picked up a Pixma Pro-100 today and installed on my iMac 27 "(Yosemite) 2011 with the latest drivers downloaded from Canon to be sure to have the website." I also checked the printer firmware but it's later to 1,100. Weather, I'm printing through Lightroom or Photoshop; by Canon Print Studio Pro, my garden image, or by LR / PS directly; with - or without PS as a manager of color; the prints is proving to be much to dark.

  I have to set an exposure of 2/3 in LR to be anywhere nearby to get the same result as on the screen. I am also careful to select the right ICC for correct paper profiles. My monitor is calibrated with a Spyder4pro and I also re-calibrated her during this process to see if that helped.

  Well. Long story short; the prints are dark. So I borrowed 2013 Spyder4pro MacBook Pro (Yosemite my wife) and installed the latest drivers from Canon. Once again; on this machine, the impressions are also to dark with about + 2/3 in order to correct the impression of something that looks like the monitor. The two screens can also be programmed to 30% brightness.

  I also have access to an Epson Stylus Photo R3000 and the prints of that much brighter spell.

  Unfortunately, I see that many others also have the same problem. Then; Here's the question. How can I fix it? Do I have to return the printer and get a refund? Because it's clearly not good enough.

  Thank you very much for your answers. But unfortunately, I have "been there, done that" on all of your advice.

  I go back on Monday to the printer and replace it with an equal Epson printer as I have only good experiences with this brand and the prints I get without using overtime to tinker with settings.

  It was my first (and last) Canon printer.