Canon Pixma MP500 Printer/Scanner compatibility with Windows 8

Similar Questions

• Canon pixma ip4000 printer works only with Windows 8.1

  Separated from this thread.

  Hai, I have a Canon pixma ip4000 printer, it works fine with my desktop running windows 7, but it didn't with my laptop running windows 8.1

  I can't find any driver support to the Canon Web site.

  Is there any solution for this?

  Looking forward to hearing from you soon.

  Thank you

  Hello Chit,

  Thanks for posting your query on the Microsoft Community.

  I suggest trying to download the latest Windows 7 drivers from Canon Web site and then try to install in compatibility mode.

  Step 1: Download the drivers from the Canon Web site.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4000#DriversAndSoftware

  Step 2: Installing the driver in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  You can also provide the following link to check the compatibility of the printer.

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  Follow the Microsoft articles as reference and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  h ttp://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

  It will be useful.

• Reference Dell photo printer 720 compatibility with Windows 8

  Is Dell photo printer 720 compatibility with Windows 8. ?

  You would be better to replace this printer.  It was a free add to dell computers sold in 2004 that cost $25 buy then. It's time to buy a new one.

  It is not compatible with windows 8 - see THIS

• Canon PIXMA MG5200 printer Scanner & stop in the middle of their work

  In recent weeks, my printer/scanner has developed erratic behavior. Examples: only 2 of the 3 pages are printed on only half a page. Scanning is impossible, the scanner stops in the middle of the scan or does not start even if it is the beginning of the usual sounds. I have re-installed the CD Canon, the updates of Windows are OK, I have a McAFee antivirus. When I run the diagnosis of Canon, it says that everything is OK. The problems in recent weeks and is getting worse. Windows today might not start at all, but after I ran beginning with repair and Restore Point. Any help would be appreciated.

  Hi James,

  We apologize for not be able to address your concerns in a timely.

  I suggest you to install the drivers in compatibility mode and check.

  See the steps to install a driver in compatibility mode:

  a. right click on the file to install the driver, and then select Properties.

  b. Select compatibility tab.

  c. check mark next to run this program in compatibility mode and select the operating system in the drop-down list.

  d. let the driver to install, and then check the functionality.

  If the problem persists, then try to uninstall and reinstall the printer once and check if it helps.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  Thank you.

• CANON Canoscan Lide 500F Scanner USB with Windows 7 64 bit

  When I try to operate this scanner by pressing the scan on the scanner, Service Image Acquisition Windows tells me "there is no application registered for this event. The scanner using Canoscan Toolbox is recognized in the select the Source area, but when I press "select" I get "unable to select TWAIN source". I saw a lot of people have already had this problem but I have not seen a solution that works for me.

  BTW this mixture of languages bothers me a lot. Although my Windows 7 is installed in English, and although the English (US) is defined as my main input language, some programs insist to settle in French. I guess that's what we call "smart" software Sometimes I hanker after the silly software from the old days. :-)

  I would be grateful for any help.

  Hello

  Please follow the steps below.

  Method 1:

  Uninstall the printer software.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:

  Download and install the Twain driver from the link below.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_lide_500f#DriversAndSoftware

• Canon Pixma MG5420 is not compatible with Windows 8

  When I install the software, my laptop can detect the printer and finishes the installation, but the network configuration of the printer driver will always fail. The printer is easily connected to my network. I can use the webprint my smartphone app - fantastic print of the photo, but my office or my cell phone (the two Windows 8) can print even a test page - driver is still not available.
  I also tried the USB Setup. It seems to work but I still get this error: "program could not load the required component and it will put end. Please reinstall your software." I uninstalled the software several times, shut down the PC, reinstalled the software, all to nothing does not. I can see the printer in the devices with the usb or wsd drivers Manager, but it is not available to any program.
  Setup has failed by using the disc that came with the printer and the file downloaded from Canon: mp68-victory-mp5400-1_01 - ejs.exe.
  I returned the printer to the seller.

  Saturday, June 1, 2013, 20:20:32 + 0000, JChucky wrote:

  When I install the software, my laptop can detect the printer and finishes the installation, but the network configuration of the printer driver will always fail. The printer is easily connected to my network. I can use the webprint my smartphone app - fantastic print of the photo, but my office or my cell phone (the two Windows 8) can print even a test page - driver is still not available.

  I just checked the Canon web site for you. Windows 8 drivers do
  There are for this. Go to the website and download the driver you need.

• Canon Pixma MP500 printer

  The printer has started printing in stripes set aside the part of text. I lived all the troubleshooting and found no problem. I ran through all the interview and has not found any problems. I had a computer scientist trying to solve the problem.

  Hi Karen,.

  Thanks for the reply.

  1 is this specific problem while you try to print online?

  2. can you print correctly from Word/excel documents?

  Response with more information to help you.

• Driver for windows 8 for canon pixma mp600 printer

  A driver is available for a canon pixma mp600 printer/scanner for windows 8?

  Canon Support and downloads would be if it is available for windows 8.

• Computer can not find scanner Canon pixma mg2550 printer

  Ive perchased today that precedes, but my computer won't find.

  installed and run the installation disc.

  no site ive found don't yet recognize this printer.

  my previous hp printer was not a problem.

  the only thing I mentioned, is the drive of dvd/cd said: 0 bytes to the left of 450?

  can someone help please...

  Moved from Community Participation

  Original title: canon pixma mg2550 printer scanner

  Contact Canon support through their website to see if they can help.

• Canon BJC-50 printer and scanner work with Windows 7?

  I have a printer Canon BJC-50 with the cartridge scanner.  I ordered a USB to parallel cable adapter must be able to connect to my laptop, because I do not have a parallel port.  The Windows 7 compatibility page says that this printer is compatible with Windows 7.  Canon said that it is not.

  Has anyone successfully connected and used a Canon BJC-50 with Windows 7?  If so, were there any problems?

  HI - same issue with Canon BJC-80. Says Windows is compatible and Cannon did not write! My BJC-80 prints OK with a USB/parallel cable and install via Windows 7 OK - but printer response time is in minutes to hit a comand "Print" in any program, for example. MS Word 2010?

  Suppose that we are victims of the creep of technology and need to buy a new printer - shame I have heaps of cartridges left!

• Old printer Canon Pixma MP500 and fairly new Acer Aspire Netbook.

  I have a CanonPixma MP500 Printer/scanner/copier that worked very well. on my desk. I now have an Aspire One Acer Netbook and I have set the printer after buying a lot of expensive ink and hooked it up to netbook - generally things are taken & play... Cannot get this to work at all. I'm puzzled. Can anyone help?

  What version of Windows is on your new netbook?

  How were you trying to set up the printer?

  • I have just connected it and expected to work
  • I used the Add Printer Wizard
  • I inserted the CD that came with the printer and started the installation routine
  • I downloaded the software from the Canon Website and he ran

  That's happened?  If you got an error message, please quote completely, without paraphrasing.

• Windows 7 can not find .inf driver for Canon Pixma iP4000 printer connected to Windows XP.

  I have a laptop running Windows 7 (64-bit machine) I want to print from.  The laptop is on a home network wireless.  The office is wireless as well and is running Windows XP.  The Office has a Canon Pixma iP4000 printer connected with a parallel cable.  I installed the latest XP drivers for the printer on the desktop.  The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly.  However, I can't connect the printer using the wireless system.  I can go on the laptop to the home network and navigate to the printer and try to install.  It makes an automatic search and says that it cannot find the correct drivers.  I can browse to the file to install on my desktop, but it of an .exe file and not. INF.  I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.

  Any suggestions?

  Very probably the XP driver name is different from the name of 64-bit driver.  Create a Local Port which copies the data to the print size in Windows 7.

  Here is an article knowledge base how to the names of the incompatible drivers.  Replace the Windows 7 machine for NT4 machine referenced in the article.

  http://support.Microsoft.com/kb/282842

  If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7.  You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer.  None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.

  The key to successful sharing between computers that run different printing architecture processors is pilot name.  PCL6 equal NOT PCL 6.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Canon PIXMA MX922 printer will allow no 2-sided Word documents

  I just installed a new Canon PIXMA MX922 printer to replace an old MX882.  Everything works fine and I am able to print on both sides documents from web pages and e-mail by checking the 'duplex' box on the menu drop down print...  However, I am unable to both sides print all Word documents.  No check box 'two-sided' descend, and no "duplex" option is available, as it was with the MX882.  I never had this problem with the old MX882.  Can you help me?

  Thank you very much.

  Hi LonnieC,

  To set the option to print double-sided on a Mac, please open the printer driver:

  1. Select layout... in the file menu of the application.  The Layout dialog opens.

  2. Select print... in the file menu of the application.  The Print dialog box opens. In the print dialog box, you can set the paper type and print quality for printing.

• Canon Pixma iP1500 printer and it connect not gives an error code 20

  I have a canon Pixma iP1500 printer and it does not connect gives an error code 20?

  Hello

  1. If it works much earlier?

  2. did you make any changes before this problem?

  3. What is the exact message you received?

  I suggest to go through these steps and check.

  Method 1:

  This is due to the UAC. Disable UAC will help because UAC prompts the user the permission to continue, the time required to get the question and answer that cause the printer to turn it off.

  If you do not want to activate UAC you can call EnablePrinter when the capture of the EnablePre() event generated by the driver.

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Uninstall the printer driver, download the latest driver on the manufacturer's website, install on your computer and check.

  Step 1: you can download the latest driver from the link below http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1500#DriversAndSoftware

  Step 2: Uninstall the device from Device Manager driver.

  a. right-click on the icon my computer

  b. Select manage from the menu.

  c. Select Device Manager in system tools that are listed in the resulting display.

  d. right-click on the device.

  e. click on the driver tab.

  f. click on uninstall.

  g. restart the computer

  Step 3: Installed the downloaded printer driver and check out them.

• HP Chromebook 14: I need to connect my Chromebook to my wireless Canon PIXMA MG3520 printer

  I have problems connecting my Chromebook to my wireless Canon PIXMA MG3520 printer. Because of the Chrome OS, it does not connect like Windows or Mac. I need help before their retirement, please.

  Hello Bama-85,

  You're right, the printers do not in the same way on Chrome OS install. I looked on the site of Google Cloud Print and your Canon printer is indeed supported. Follow this link to set up your printer ready for cloud.

  I have not setup a printer Canon via Google Cloud Print, but I guess it's as easy as setting up of HP printers on the print service.