Canon PIXMA MX922 User Guide: printing on a blank disc with the Canon PIXMA MX922 all-in-One

Similar Questions

• I have a problem with the HP psc 2210 all in one printer.

  My printer is an hp psc 2210 all-in-one

  All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

  Hello

  Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• Canon imageCLASS MF5550 all-in - One Printer Driver Vista or WIndows 7?

  I have a picture of Canon MF5550 CLASS all-in-one laser printer connected to a computer running XP on a local wireless network. I have two laptops over the Wireless LAN under Vista and Windows 7. There is no driver available for this printer beyond XP. Is there a way I can print laptop laptop Vista or Windows 7 computer through the attached XPcomputer printer?

  Santu

  -------

  Hello

  Because the drivers are not compatible with Windows 7, so I suggest you to install the drivers under Windows 7 by choosing the level of compatibility under Windows X.

  Drivers: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf5550?selectedName=DriversAndSoftware

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Hope this information is useful.

• 64-bit driver for Canon imageCLASS D860 all-in-One Printer

  someone at - he found a driver 64 bit Windows 7 that works for Canon imageCLASS D860 all-in - One Printer?

  someone at - he found a driver 64 bit Windows 7 that works for Canon imageCLASS D860 all-in - One Printer?

  Canon does not support that particular product under Windows 7 x 64.

  They argue as well, "Canon imageCLASS D860: this product is compatible with Windows 7 32-bit." There are no drivers for Windows 7 64-bit. "and"No 64 bit drivers are currently available for this product SOHO.

  Unfortunately - Canon has decided that this particular product is a legacy.

• Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

  Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

  Tried the Canon support? That would be my first port of call...

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• Canon MX 885 all in one device and XP that it will mark the beginning of direct links to has 4 total printers. Is this possible in Windows 7?

  Have a friend who has a Canon MX 885 all in one device and when he had it in XP it can deliver direct links (instances) for each of the printers - 4 total functions. Apparently, it has been easy in XP, but it can set this feature for two instances I have 7.

  Is there a limit to 7 about this function?

  If this is not the case, how it has it and get 4 different photos of the MX885 in "printers and devices" called MX885-fast, photo-MX885, MX885-medium and MX885-fax.

  Nothing to do with win7, it is a feature of the software/drivers Canon

  See Canon support pages

  http://www.Canon.co.UK/support/Consumer_Products/products/Fax__Multifunctionals/inkjet/PIXMA_MX_series/PIXMA_MX884.aspx?type=download&page=1

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• -What is the HP Officejet 7310 all in one able to print wireless

  -What is the HP Officejet 7310 all in one able to print wireless

  What operating system?  If Windows and with the printer connected to the router via Ethernet, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• LR 4 prints only a blank page on the Epson 2880. Print preview panes remain blank. Window 7 OS. Desperately need help!

  LR 4 prints only a blank page on the Epson 2880. Print preview panes remain blank. Window 7 OS. Desperately need help!

  Bob

  I did uninstall another and got rid of the Preferences file. Voila! This works. I'm not crazy about not understanding why, but he works at a time when he really needs to work.

  Thanks again for your kind attention.

  Merry Christmas.

  David

• Canon Imageclass D320 All - in - One Printer not install under Windows 7

  My new laptop Windows 7 cannot install a driver for the Canon ImageClass D320 printer. The utility plug & play in Windows 7 has failed to find a driver for the D320. I have the installation disc that came w / the D320, but it is also a failure install a driver. (This installation disk includes drivers for only Windows 2000, Windows XP, Windows 9 X, and Windows Millennium Edition.) The Canon support site @ http://www.usa.canon.com/cusa/support/office/imageclass copiers/imageclass d320/imageclass d320? selectedName = DriversAndSoftware offers drivers the D320, but only for these same 4 OS (that is, only for Windows 2000, Windows XP, Windows 9 X, and Windows Me). Maybe the D320 needs a 64-bit driver?

  Any information would be appreciated.

  I certainly do not see 64-bit Windows 7 drivers for the D320 to http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d320#DriversAndSoftware , and more operating systems you have listed they also show Vista and Vista 64-bit and Windows 7, Windows 7 64 bit.

  I use Firefox as my Internet browser.  However if I use exactly the same link using Internet Explorer 9, I see no Windows 7 driver.  If I use Internet Explorer 9 and change it to compatibility view, I can see all the drivers.  (To do this in IE 9 just click on the little icon that looks like a page torn paper in have - in the address bar to the left of the Refresh - button or go to the Tools Menu and select compatibility view)

  This is the second time I've seen this problem with the site driver of Canon (where I saw a thing and the person I tried to help him was to see something else on the same link).

  Here is a picture of what I see on the website of Canon, with the drop-down list to choose the operating system by selecting the driver 64 bit Windows 7:

  

• Canon imageCLASS MF3240 all-in - One Printer

  I tried to download all the drivers various software driver proposed to update the computer and those that have been suggested on this site, but none of them seems to work. I don't know what to do at this point.

  Thank you!

  The driver is on the Canon site: http://usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf3240#DriversAndSoftware

  It should be called imageCLASS MF3200 Series Printer Driver Ver.3...
  File name: MF3200_MFDrivers_Win_x32_us_EN_7.ex...

  (for 32 bit)

  and

  imageCLASS MF3200 Series Printer Driver Ver.3...
  File name: MF3200_MFDrivers_Win_x64_us_EN_7.ex...

  (for 64 bit)

  Just make sure that you get the correct for your CPU.  What I would do if I had trouble with this printer is disconnect it from the computer, go to the Control Panel, programs & features, uninstall any software of Canon printer you have there, then restart the PC.

  Once restarted, install the newly downloaded driver and do not connect the printer until the software tells you to do.

• Wireless printer not communicating is not with the computer

  I have a new computer and my first wireless printer a month or two ago.  I had all this work, then all of a sudden the printer stopped working.  The printer seems to be correctly connected to the wireless configuration and the computer is connected, but they do not speak with each other.

  If I submit something to print, it won't be in the queue for the printer.  I can print a page to test the computer printer, but nothing else.  I tried printing HP and doctor Scan and spent several hours trying to figure this out.  Probably I'm missing something that would be obvious to a more experienced user.

  I did uninstall the printer software and install an updated version of online, but which did not help either.

  Any suggestions?

  Ooh! Ooh!  I found it.  I'm embarrassed to admit what she was.  I was looking for articles on google print problems and someone mentioned the dialog box that appears when you print.  Mine has been configured to print in pdf format!  I've never been and was fine print for a month.  Who would have thought.  Duh.

  So, I appreciate all your help, and you led me to the answer.

  Thanks again.