Canon Power Shot S2 IS camera / 1130 PC does not

Similar Questions

• Error message saying the driver is unavailable when I connect my camera Canon Power Shot S 30.

  I have Windows 8 and I get an error message saying that the driver is unavailable when I connect my camera Canon Power Shot S 30.

  Hi Marc and KatyReiling,

  Welcome to the Microsoft community.

  According to the site Internet on Canon Power Shot S 30 camera doesn't have a driver according to this link

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_s_series/powershot_s30#DriversAndSoftware

  However, we need to know if you tried to connect the camera to a computer or another USB port?

  Let us know more information about the issue and we will be happy to help you.

• Canon Power shot s230 camera need driver camera online

  My computer has windows7 and does not recognize my Canon Power Shot s230 camoera. and can not read the installation cd either.  Canon no longer supports this camera so I'm hoping somene can help me to find the driver online, I always love this picture. Thank you

  Hello

  1 are there any changes on the computer?
  2. were you able to use the camera on the computer before?
  3. do you receive any error messages?

  Method 1:
  I suggest you try to download software or firmware for Canon Powershot S230 and check if it helps.

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_s_series/powershot_s230#DriversAndSoftware

  Method 2:
  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.
  Follow the link below a convenience store opened.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  For more information about installing the latest driver, see the link below.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful.

• Cannot install the camera Canon Power Shot A85 on Windows 8

  I used Canon camera digital solution disk, ver.17.2 to install my Canon Power Shot A85 on my computer Windows 8. The camera doesn't

  install, just ZoomBrowser EX4.6.

  Hi Gordon,.

  It would be great if you can provide more information about the issue.

  (1) what exactly happens when you install the camera Canon Power Shot A85 on Windows 8?

  (2) you get an error message? If Yes, what is the exact error message?

  (3) you have any previous/old drivers of the device and the associated software installed on the computer?

  (4) did you try to install the latest drivers and software on the Canon site?

  The Canon Web site shows that there is no Windows 8 driver for this camera model. The driver may be either included in the operating system, or you may not need to pilot. You can click on the given link and check details:

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a85#DriversAndSoftware

  Note: Select the operating system and check the latest drivers available.

  But because the device does not work with the drivers built into Windows 8, it would be preferable to contact Canon Technical Support for assistance.

  Hope this information is useful.

• Can I use a Canon Power Shot SX210-IS with Windows 8?

  Can I use a Canon Power Shot SX210-IS with Windows 8? The software is compatible, or y at - it update?

  Hello mtjs13,

  You would be able to use the camera PowerShot SX210 IS with Windows 8.  We have a directory of software on our web site that includes a set of updates for Windows 8.  You can access them through this web link.

• I have a Canon Power Shot A520 and I can't get the lid open.

  I followed the manual and the I'm new on my camera, but I can't slide the battery cover open on my Canon Power Shot A520. All of the suggestions.

  WG salvation!

  Thanks for posting.

  There is a locking switch slide on the battery to be slid sideways as you also push the battery door.  Please make sure you do both at the same time, otherwise the battery door remains locked.

  This has not answered your question? Find more help contact us.

• My Canon Power Shot D10 and Flip Ultra HD take videos that are NOTaccepted by Windows Movie Maker because of the type of file.

  This converter is recommended for cameras above so that I can edit, trim & merge video clips of the cameras above for use in Windows Movie Maker? I am able to download the. Files MOV of the Canon Power Shot D10 in MY DVD but each clip plays individually without a smooth merger. When I tried to merge the clips using a free download Wondershare clips merged but no audio came through. Now I have a Flip Ultra HD, which has MP4 files. Thanks for the tips.

  I like the "Super."
  http://www.myvideoproblems.com/webpages/UsefulProgrammes.htm

• Cannot open RAW from Canon Power Shot G7X Marc 11 images to PES 13

  I'm not able to open RAW images taken with my Canon Power Shot G7 X 11 brand to 13 items in Photoshop.

  Whenever I get the message - Photoshop Elements cannot open this file.  If you try to open a file from a digital camera raw, make sure that you have the latest Camera Raw installed update...

  So I passed and got the last update, and I always get the same result, not be able to open in PSE 13 RAW image.

  I checked the relevant version required for brand Canon Power Shot G7 X 11 and it says version 9.6.1 was necessary.

  I checked the "Photoshop keep updated" and read through the material and tried to download the "install plug-in camera Raw" nothing happened.  I downloaded the 'Camera Raw 9.6.1' and got a 'set up' folder of zip files that finally extracted from 'Set up' and 'charges + adobepatch installer.exe. "

  What should I do from here?

  The last camera raw update for PSE13 was 9.1. Your choice is:

  1. Upgrade PES
  2. Convert CR2 Adobe raw (DNG) using the free Adobe's DNG Converter
  3. Use the Canon DPP from the disk of the software with your camera

  PSE15 must be vacated before the end of September, then you might want to wait before upgrading. In the meantime, you can download PSE14 and use it on a free trial basis.

• How can I get the name of owners on a Power Shot S5 IS camera?

  Hello

  I recently bought a Power Shot S5 IS camera. I would like to know how to enter my name into the camera while it lists my name EXIF information as the 'owner '. At present, this information is empty.

  Any help that can be provided will be appreciated. Thank you.

  See you soon

  Don.

  Connect your camera via the USB port, start it and run "Camera Window.

  In the upper right corner, there is an icon that looks like a gear (just to the left of the "?" icon in the extreme upper right corner).  Until it clicks.  This opens the preferences window.

  There are three icons at the top of the Preferences window.  The third icon is labeled "Camera".  Click the icon of camer.

  There are two tabs on this screen.  They are labelled 'Information' and 'Set '.  Click on the tab labeled "Set".

  The box on the top of this page is for the "owner name".  There is a button "Edit" to the right.  By clicking on the button "Edit" makes the editable field.

  Type your name.

  Press the 'Set' button (last button says "Edit") to save your changes.

  There is also a box for 'Author' and 'Copyright Info': you can define messages in these areas so that will belong to the image of the EXIF data.

  Press the 'Ok' (lower right) button to save and close the window.

  Back on the main window of the utility "CameraWindow" a banner in the upper part lists the model of camera, the firmware version and the name of owners.  You should see your name listed in there.

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• When I click on Power Options in the Control Panel, it does not. How can I cope?

  When I click on Power Options in the Control Panel, it does not.   How can I cope?

  When I click on Power Options in the Control Panel, it does not.   How can I cope?

  Make a check of the system files. It's to look for corrupt files. He will try to fix it if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  Question:

  Was there a time when the Power Options in the control panel was admissible?

  If Yes, how long?

  Would it be too long to do a system restore?

  System Restore requires you to choose a date where you did not have this problem as the restore point.

  You remember such a date?

  How the system restore...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  * Original title: charging the battery

  My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  How can I get the computer to start the battery again?

  The battery is probably faulty. You can say as follows:

  1. Shut down Windows.
  2. Remove the battery.
  3. Wait an hour.
  4. The power supply is cold? If Yes, then the laptop consumes no power (which is normal).
  5. Insert the battery.
  6. Wait an hour.
  7. The power supply is hot? If so, the battery is recharged.
  8. Start normally and check the charge level. If she's still around 59% while the battery no longer accepts the full load. You need to replace it.

• Microsoft camera codec pack does not

  Built a new computer and I use sp 1 Swedish version 64-bit W7 on it. But the camera codec pack does not work. It worked fine on my old computer. First of all, I have installed the Sony raw pack but it din't work and after that I installed the 64 bit version of the Microsoft package but that didn't work either. Don't know what to do.

  Well I installed it again and this time it worked. Strange but I'm happy

• camera - fuji finepix - does not show as a connected

  Why my camera - fuji finepix - does not show as a device connected on mac OS 10.11?  Photos of Mac sees the camera, so cables etc are good.

  Hi jtucker,.

  If talk you about your Lightroom software does not detect the camera, please update your Lightroom 6.4/2015.4 update.

  Reference: Lightroom CC 2015.4 / 6.4 available

  Let us know if that helps.

  Kind regards

  Mohit

• I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?

  I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?

  It allows you to use your RC files, Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Camera Raw: How to use Adobe DNG Converter - YouTube