Canon powershot s100 turns off when I turn it on

Similar Questions

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Screen turns black and shuts off when wakes up Portege Z830 - 11M

  Hi all

  Anyone know what could be the reason for the screen goes black and turns off when the laptop wakes up?
  The laptop is Toshiba Portege Z830 - 11 M W7HP, purchased in September.

  The problem started shortly after I bought the laptop, but gradually began with a period of 1-2 seconds black screen whenever I tried to wake the portable computer of fashion 'sleep'. He didn't look like a regular part "blackout" of the wake-up process so I just tried to ignore it, but it started to happen more often recently. It got really worse after two months of use and the black screen two or three times until I'm at the login screen. The error was also difficult to re-create because it was random. Sometimes, the screen went black once sometimes twice or just blinked for a fraction of a second.

  Yesterday, I worked during the day and at night it turned really bad. The screen went black several times, whenever I went back to work after a short break.
  I changed the laptop off when I'm done, but when I turned back on it in the morning, the screen was just black. I tried to use the touchpad, but it is only the screen on the gray.

  Can anyone suggest what to do?

  So finally that cannot start the laptop is Hmm normal?
  It would be interesting to know if this help:
  -Battery adapter and ac removal
  -Press and hold power button do this for 30 sec
  -Then reconnect both sides.
  Turn on the laptop?

  If this is not good enough, you're in trouble I guess its hardware related issue and in this case you must service help

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• My MOTOSPEAK off when bluetooth is turned off.

  I was wondering if anyone else has the same problem? My motospeak remains on even after my bluetooth goes out... so I force close and then when I turn on my bluetooth it turns on... but still does not turn off when I turn off my bluetooth. A way to fix it?

  Well, in the framework of trying to solve another problem... see my other post... I recharged my phone to default settings and reloaded all my apps. It said that the problem with Motospeak has set itself. We will see as time passes if that is still true. Thanks for all the suggestions and help.

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it. In the Labview web UI designer

  How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it.

  I need to change the adjustment vaguely Autoscale property for my graphic indicator. Can someone help me please.

  Thank you!

  Hello

  I have confirmed that there is currently no way programmatically enable/disable autoscaling for axes on the LabVIEW graphical indicator generator of the user Web interface. We noted this to possibly be implemented in the future; Sorry for the inconvenience.

• iPAQ turns off when taken off the coast of the Office docking station

  My hp iPAQ PDA (model 4155) began to turn off when I take it off the cradle of office.  I don't see any options or settings to correct this.  Please notify.

  Sounds to me like the battery takes is no longer a burden.  You can probably find a new battery for your iPaq by searching on the internet.

• My computer it does not turn off when I go early and turn it off?

  My computer it does not turn off when I go early and turn it off? u can help me, please!

  Hello

  ·         What operating system do you use?

  ·         Did you do last changes made on your computer before the show?

  If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  If you use Windows XP, see:

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

  See also:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

• Monitor not turns off when I close the lid!

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

  You can download the manual in PDF HERE.

• HP 15-r011na: laptop turns off when it is attached cable ca

  Hi, I recently picked up the upgrade of Windows 10 and since then have had problems with the laptop switching power, do not know if it is related to Windows 10 but seems a coincidence!  When I got close I use the power on the screen completely closes the button and the laptop.  When I turn it on it's ok, if I have the AC cable disconnected (i.e. using battery power) but if I have the AC cable the screen goes off, but then goes black and seems to have turned off again, and I have to press the power button to put on the.  Also, if I connect the cable so that the laptop is on it goes black immediately, and if I delete it the screen comes alive again.  Can someone tell me what's going on that I have no idea about these things, and it makes me absolutely crazy!  I would really appreciate some advice please.

  Hi @Greenjack67 ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop 15-r011na HP TouchSmart and the laptop turns off when it is attached cable ca. Here is a link to test and calibrate your battery for Windows 10.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Plug the power supply directly into a different wall outlet. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  I hope this helps.

  Thank you.

• krst Checkpoint error - when my computer starts, that it starts to power, but then turns off when it is at the Dell logo screen

  When starting my computer it starts to turns on then shuts off when it gets to the Dell logo screen.

  How can I fix?

  Hello

  Try the methods in the links below and check if it helps.
  Windows XP restarts unexpectedly or restarts when you shut down the computer
  http://support.Microsoft.com/kb/320299
  
  Windows XP restarts when you try to shut down your computer
  http://support.Microsoft.com/kb/311806
  Windows XP stops and automatic restart problems
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx
  
  I hope this helps.

• Two questions. (1) RIP in media player 11 problems. (2) portable speakers do not turn off when the headset is plugged...

  Hey all. I desperately need help. I have a laptop "Durabook" with Windows XP meidand service pack 3 update.  The internal speakers have never turned off when I plug a headset or headphone cable of the adapter into the outlet. It is an option that I have figured out. All my other laptops have silenced the computer speakers when headphones are connected.

  The most frustrating problem I have is in Media Player when you use the tab OUT, when I insert a cd Ripper in the computer, it is not recognized.  If I close and reopen WMP (Windows Media Player) cd, the cover and all the info of the cd is here and ready to be torn APART. Once the cd ends and ejects I insert another cd and nothing happens. Once again, I've closed and reopened WMP and evrything is ready to be torn APART again.

  Please please help.  I can't be the only one who had this problem.  I removed all anti-virus programs, removed and reinstalled WMP, twice.

  I'd appreciate any help.

  Thank you all

  Carl aka theSTUNG1

  Hi Carl,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a parameter to extract music select "Always".
  a. open Windows Media Player 11.
  b. click Extract, click more options.
  c. click the rip music and make sure 'Always' is selection in accordance with article "Rip CD when inserted.
  d. click ok to apply the changes and restart the media player.
  e. check if the problem persists.

  See songs Rip (copy) from a CD to your computer

  Step 2: Make sure the headset is plugged into the socket on the right
  a. connect the headphones to the right sleeve and check the result.
  b. you can also right click on the volume icon and adjust the sound settings.

  See adjust the Volume of the computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 15 Notebook: Wifi does, said feature WiFi is turned off when it is, in fact, on?

  My wifi suddenly turned off, when I troubleshooted it says that wireless capability is turned off and when I went to turn it on, it was already activated. I tried many things including updating almost everything, but nothing seems to work. Help.

  Hi @Elexia,

  Nice day. Forums can accommodate you! Is a great place to find resolutions. I read the post about wifi, HP 15 laptop connectivity problems. I'll be happy to help you here.

  Impressive work on diagnosing the problem properly and perform troubleshooting before asking your question on the forums of HP. Kudos to you on this point. It is a privilege to work with tech-savvy and technically competent customers like you and we greatly appreciate your business with HP and it's a real pleasure to help you here.

  First off the power we need to properly diagnose if the problem is hardware or software partners.

  For clarity and to help you the best I would need more information in this regard.

  Please provide the model # complete computer.

  • When there is this first begin?
  • Any hardware changes were made such as changing the router or modem?
  • Has it started after any update an application or software? (windows, HP or other applications such as security applications)

  If the event is recent, you might want to try a system restore to a work date known well before the problem occurred. Link for restore: http://support.hp.com/us-en/document/c03327545

  If it does not please visit these links to help: http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/8499326/model/8942890/document/c04649175/

  Link 2: http://answers.microsoft.com/en-us/windows/forum/windows_10-windows_store/windows-10-wireless-capability-is-turn-off/18d989f9-bf2e-4477-b361-52a6ba4b88b3

  Link 3: http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Common-fixes-for-wireless-connectivity-issues/m-p/4831601/highlight/true#M86871

  Link 4: https://support.microsoft.com/en-in/help/10741/windows-10-fix-network-connection-issues#network-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  If none of these work, please use a wired Ethernet cable and update the bios, the chipset and Wi - Fi drivers from this link: http://hp.com/drivers that relate to your computer.

  As a last resort, please save all your data and run a recovery system to factory default this link: http://support.hp.com/in-en/document/c04758961

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.