Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

If all goes well.

Tags: Windows

Similar Questions

  • On Satellite A200 (PSAE6E) FN key works only with Windows XP Home edition

    Hello

    I just get my Toshiba Satellite A200-2BH, (PSAE6E), included with windows Vista. I'm not comfortable with that OS so I formatted the hard drive and install win XP pro SP3 all seem to be fine with the driver downloaded from driver support Toshiba on the line, but the FN key do not work in certain combinations, for example:
    FN + F5 or + F6 or + F7 do not work
    someone say online in this forum that I should install updated BIOS, but this note on the Toshiba support website me resist:

    * "This Bios update adds functionality to your system *."
    * This Bios is NOT compatible for notebook computers equipped with Windows Vista! "*

    What should I do?
    My current setup is:
    Satellite A200 PSAE6E with WXP PRO SP3 with the FN key does not
    Should I install this update to fix this problem?

    Please help me with the path I should follow
    Thank you very much

    FN feature under Windows XP Home edition is supported with the latest version of the BIOS update. So don't be afraid. Download the right BIOS update and update Windows XP Home edition.
    Before start you BIOS updated to close all running applications and make sure that the laptop is connected to the power supply do not do this with battery power!

  • Canon Pixma MG5320 printer does not print. Ink tanks are full, but the pages are blank. Help, please.

    I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.

    Hi marsha3236,

    To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern.  If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink.  To print the nozzle check pattern and make cleaning, please follow the steps located here.

    If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.

  • Bootsect.dat file is corrupt, NTLDR is missing/compressed on x 86 pc with Windows XP Home Edition Sp3 and Ie8

    I have a x 86 pc with Windows XP Home Edition SP3 and IE8.

    While preparing for a possible update for Win 7, I thought repartioning and "multiboot" my HARD drive.

    I tried to get WinXP operating as best I can.  I was also check out how to use the Windows Recovery Console to reinstall WinXP and transfer files to a clean reinstall.

    Found while searching "All boot paths" to Start\Run\msconfig\BOOT. INI that one boot path has been highlighted with errors indicating that "file is corrupt because playing a disc error has occurred" and that NTLDR is missing or corrupt.  In fact, it is blurred.  It points to "Recovery Console Microsoft Windows/cmdcon.  I've not used the Recovery Console, ever.

    I have a desktop Gateway 5310 S (detail) and no original XP disc, apparently.

    I have, but never used, a 4ea. set of recovery CD as of 12/05/05 I need to have created after purchase.

    I also had many, odd, problems that come and go, including worth displaying various websites, Yahoo Home Pages and E-mail that keep switch to compatibility mode or outright deletion.  The video and audio on Hulu and video-on-demand online services are always out of sync.  I have problems with editing posts on sites like this even if I can edit my profile fine pages.

    This particular set of problems started recently and very suddenly, from one day to the other.  It was after he worked actually pretty good for a change.

    I don't know how long the boot.ini file has been damaged, I actually discovered by chance.

    I can also not to reinstall some programs such as Family Tree Maker 2005 and 2008, when it was suggested to me by ancestry.com to uninstall/reinstall.

    I have the latest Java and Adobe Flash Player.  I've defragged and disc verified my discs.

    I used CCleaner to delete temp and unwanted files per day.  I ran Hitman Pro, MBAM, MBAR, MSE and SAS several times without detected virus or malware.

    And, as I mentioned above, I have problems with the editor of this site, right now.  Sometimes it just freezes and I have to leave to clear.  Other times it's duplicating entire sentences.  He also flip/flip flops between a Publisher full page and, as now, a half page window of the editor on the half left of the page.

    Suggestions from what people you can come would be greatly appreciated.  This gets really annoying.

    Thank you

    Vernon

    When you check the paths in the boot.ini file, and the recovery console is installed, you will always get an error message indicating that the startup path is not valid.

    If the recovery console is actually corrupted just to uninstall, you can reinstall or burn a cd with the recovery console.

    go here for instructions on deleting the recovery console.

    ===========

    Here's how to make a bootable xp recovery console cd

    Courtesy of JoseIbarra

    You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

    Here's how:

    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    RC. ISO

    Download the ISO from here:

    http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

    ===============

    as for the other problems:

    did you use Registry cleaners?

    These can damage your system

    You seem to be free of infection, it would seem that a part of your process cleaning has removed a necessary file.

    ===============

    Checkdisk with parameter/r should be run. and run it again until there is no error.

    ==========

    you are fully updated and patched to Microsoft updates?

  • problems with Windows xp home edition

    Hello everyone. I have this sony vaio PCV-RS310 which has been ravaged by some kind of malware... well I know this is an old machine all standards but I like it a lot and it had Windows XP Home Edition installed (my favorite OS) and I tried to revive, but recently he lost power while I was trying to do a repair of a few boot floppies that I did from the microsoft Web site. When that power is is relit, I had more access to the usual screen that I had at the start. I do not see when I turn it on is the logo of sony for a few seconds, followed by:

    NUMBER OF PCI BUS DEVICE NO. FUNCTION NO IDENTIFICATION NUMBER OF THE SELLER ID OF DEVICE DEVICE CLASSIFICATION IRQ
    0 29 0 8086 USB 2 24 11 bus controllers

    0 29 1 8086 24 4 bus USB 3 controllers

    0 29 2 8086 24 C 7 "12

    0 29 7 8086 24CD 9 «»

    0 31 1 8086 24CB IDE Controller 14/15

    24 5 10 0 31 5 8086 multimedia device

    0 31 6 8086 24 6 comm simple controller 10

    1 9 0 1002 5960 view controller 5

    1 13 0 10EC 8139 network 5 controller

    1 14 0 1033 00F2 12 USB Bus controllers

    And then "press any key to restart", and when I do the same process again. I tried to do a restore of the configuration of system with the recovery discs that came with it but all it shows is a blue screen and then the mouse pointer appears and occasionally I get a stop error message, but usually the blue screen with the mouse pointer remains on during about 10 minutes and then it restarts, showing the screens above and restarts again everywhere : the recovery process. Every thing in there seems to work except for one of the RAM sticks, which I ordered it and the hard drive only shows half of the space. When I turn it on, I get a short beep... that tellls me the system is ok... I think so. I have no access to the c: and d: drives and when I use the boot-floppies to access the recovery console, I get the old access denied even if I can't see the disks listed above. Are there other options at my disposal? I have not installation of xp disc is because the OS is preinstalled. Any help would be much appreciated. Thank you.

    Looks like it's maybe a mess with the malware, recovery interruption attempted with power and all this tent.

    If your system has a CD/DVD drive, I create a bootable CD from the Console of the Recovery XP (no XP media required) and once in the Recovery Console, see if you can run a chkdsk /r on your HARD drive, as power cuts can sometimes damage the NT (NTFS) file system.

    Here's how:

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

    If you get a blue screen of death (BSOD), it would be useful to know what was said so we don't have to guess what you are seeing.

    The next time your system crashes, provide more information on what you see.
    Here's a BSOD example showing information you provide:
    Send for the nose and the Red arrows (3 to 4 lines total).
    Send all * line STOP message since there are clues in the 4 parameters.
    If there is a name of the file listed in the STOP message, don't forget to include this information too.
    Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  • I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

    Error loading \3\DLBUtime.dll

    I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

    I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

    Can someone help me with this?

    Aprilm,

    You are LuLu5119, who posted a question last August?

    If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

    Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

    In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

    Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

    Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

    Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

    If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

    As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

    MalwareBytes Anti-Malware: http://malwarebytes.org/
    SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

    For MalwareBytes Anti-Malware, download, install, update and run.
    For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

  • Have a Dell PC with Windows XP Home Edition with restoration, internet and the program of the questions that I went into the details in the body of the present.

    I have a Dell with Windows XP Home Edition system that uses the internet connection. Friday, he had a problem with images in line being "pixel-ed", which means that the image was blurred and boxes. So I did a restore of the system back as much as she would in July and concluded that the IAF has a program called accelerator that had been implemented to go faster, but eventually would make very good images. Then, I got that part fixed but now a game that I play "Mahjongg" won't play right and when I go to the area "help and support" to try to reschedule, so it don't open even now. Can someone help me please? Thank you

    Thanks for the help. I returned and reinstalled everything, even if it was already installed and now everything works.

  • HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

    HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

    You need an external DVD drive to get the repair will.

    Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

    The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

    A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

    See this page from HP

  • How do I create a new user account with windows XP Home Edition after operational failure

    How do I create a new user account with windows XP Home Edition after operational failure

    Hi andyprice,
     
    -What is the operational flaw that you speak?
    -You receive an error message when trying to create a new user account?
     
    Write us with more information pertaining to the matter to help us help you better.
     
    In the meantime, you can refer to this article:
  • When I start with Windows XP Home Edition, the screen appears, only the mouse arrow. Help!

    When I start with Windows XP Home Edition, the screen appears, only the mouse arrow.  Help!

    Hi stevejager,

    ·         Remember to make changes?

    ·         You receive an error when starting?

    ·         Have you tried booting in safe mode?

    Method 1: First of all, we will try to start the computer in last good known Configuration and see if it boots.

    Method 2: If it is impossible to start, try to start in safe mode. If able to start and then try to perform a System Restore, since this is a recent problem that has occurred.

    Method 3: Follow the steps in the below article mentioned.

    Computer stops responding with a black screen when you start Windows XP

  • magicJack works only with Windows 7 Home Premium.

    magicJack will not run in Windows 7 Home Premium.  After TEN conversations with their Tech Support, they got it to work, but I have to manually install the program whenever I restart my computer.  Please Microsoft, catch these people to magicJack with Windows 7 Home Premium.

    Yet once again, I could never the magicJack to install completely.  I tried on the computer of a friend with XP and it worked fine.  So, the problem is with the new Windows 7 Home Premium, and magicJack is taking their old time good to get on the same page.

    I tried the convenience store and choose XP SP2, which must have worked, but Win 7 was told that it was not compatible.

    Anyone with similar problems?  magicJack support is pretty bad.  You get what you pay for, AT & T.

    -Kurt

    Actually, it is not Microsoft's work to ensure that third party vendors are "at speed".  They should do their research.  Windows 7 is available for some time now and there was enough time for the developers of the magicjack to have obtained a copy and correct their problems.  Your beef is entirely with the developers of magicjack. Brian Tillman [MVP-Outlook]

  • MS-DOS works with Windows XP - Home Edition, but not with XP-Media edition

    I have an old MS-DOS program that can be run on Windows XP Home Edition, but on my laptop with XP Media Edition, it does not load and gives the following error message:
    NTVDM CPU has encountered an invalid statement:
                      
    CPU: c000 IP: 2956 OP: 0f 00000000

    Y at - it a fix for this problem?

    Hello

    I suggest you follow the steps by Ajay of this link and check if this may help: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/16-bit-ms-dos-subsystem-ntvdm-cpu-illegal/4b551cf4-e317-44e6-9e93-20a5c2240497

    It will be useful.

  • Canon EOS 20 d is not compatible with Windows 7 (no driver) then how to make my pictures from my camera to my pc?

    EOS 20 d is not compatible with this version of Windows.

    "Because this device is not compatible with this version of Windows, and there is no solution for this problem, we recommend that you find another device on the following Web site:

    Just bought a new laptop with Windows 7 and now I can't download photos from my camera to my computer.  All messages in error (including the Canon Website) say that there is no driver available.

    Try the suggestion of third jeff1212 post) in the following link:

    http://www.TomsHardware.com/Forum/53065-5-Windows-Vista-Canon-problems

  • How to disable the touchpad on Satellite L300-19F with Windows XP Home edition?

    Toshiba Satellite L300-19F, who was with windows Vista
    I installed windows XP and everything works fine.

    Since I'm on USB mouse to run I want to disable the Touchpad, but when I press Fn + disable key for touch pad it does not work.

    Need help.
    One can tell me what the problem is?

    Hello.

    To disable the mouse pad, you can go to control panel-> mouse control and disable the mouse pad, or you can use FN + F9.

    Kind regards.

  • No sound on Portege 3490CT with Windows XP Home edition

    Hello

    I bought a Portege 3490CT on eBay. Everything works fine except there is no sound available. I use WinXP SP2. I know there is a problem with the service packs, but the same problem exists after installation of Windows XP without service pack: it seems to be, that there is no audio devices available. The Windows Device Manager indicates only something a device "legacy". I think that it does not find the real device of Yamaha.

    Install the new driver of Toshiba homepage gives only a "driver not installed" error message.
    In the BIOS there is no option to disable the sound equipment.
    It is perhaps damaged?

    I hope someone has an idea...

    Thank you and best regards
    Mirko

    Usually the legacy term device is used to refer to any device that is not Plug and Play compatible.
    I can only suggest why it doesn't and I think it s a driver problem.
    The sound card that is installed on this laptop is compatible with Sound Blaster Pro and Windows Sound System.
    The computer uses a YMF744B. The YMF744B integrates master audio bus PCI, 64 optical interface of synthesis wavetable, AC-2 interface and control AC97 CODEC.
    In case you would recommend for Yamaha YMF752 or the driver that supports the chip YMF752 you are looking for the most recent driver.

    Check this box:
    http://www.softwarepatch.com/utilities/Yamaha-acxg-driver.html

Maybe you are looking for

  • Import yamaha keyboard styles in garageband 10 eardrum

    My yamaha keyboard must be connected through the usb midi cable in garageband 10.1.2 and records fine while playing the piano. My mac is El Capitan 10.11. What I want is to record the drum styles / provided by yamaha itself. How can I save this garag

  • Bandcamp player is not loading on my site after updating firefox to 23.01

    the page --------------------------the player must appear inside the box after "listening".

  • How can I continue Motorola?

    You made us wait for almost a year for the froyo update and then you present us with this piece of - desecration deleted -? I just put my phone and how I wish that I should not have. My phone a brick now and you mind, it was the official update. I ha

  • How can I read firewire no port 1394 on my laptop.

    My computer laptop pavilion accepts all cards that could allow me to save data to tape DV camcorder from a camera with a fireware port.

  • Impossible to uninstall SPOTZILLA

    Please tell me if there is something different about uninstalling the program my computer SPOTZILLA. I am unable to uninstall this program, using the normal methods. Inform me please if you can help me with this problem. Thank you in advance. Pete