Canon Scanner C3170U

Similar Questions

• New PC with Windows 7 and a 'old' and apparently compatible, Canon scanner LIDE 90.

  New PC with Windows 7 and an 'old' Canon scanner LIDE 90.  Compatibility of Windows gives the all clear gun site, but I'm unable to operate as Twain cannot be opened "following all my attempts to load after several uninstalls. Whatever Windows compatibility assurance, I downloaded a driver from their site, but nothing helped. Is it me?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Canon scanner

  Opening of the early Sierra brings up a Panel for list for the user to select scanners. For me no scanners are listed. I have a Canon MG7520 that has worked well for more than a year of Apple operating.

  After checking the scanner and find WiFi and other features everything in order, tempting scan shows a report of several reasons for the failure. The last seems to appply. He says that the name of the scanner is not correct.

  Experiment, I found a work around start in the Apple preferences and go Printers and scanners. It works as follows:

  Power scanner / place the document on the scanner glass / open preferences from Apple (for the top of the screen to the left) / open Printers and scanners / scanner names listed / select or enter MG7500 Canon series 6 / Scanner screen opens (it shows a symbol of a scanner and scan of the word in its upper right) / select the area to be scanned in the new box / click the scan symbol (a form opens allowing the user to specify a name and a location for the scan).

  All this applies only to Canon printer/scanner and maybe not all of them. I imagine that Apple will correct the defect of the opening screen of the Sierra to do its job.

  You welcome any comments from the user.

  Apple - hope you're listening to.

  William foot

  [email protected]

  (1) apple may be addressed here

  Apple.com/Feedback

  (2) it is a product of canon, they can choose to support or not. Apple will not reverse engineer their OS to work for someone else's decision. the developers of Canon had access to OS X 10.12 months before it was public to make the drivers work or not, they chose to not

  (3) send never publicly your e-mail unless you want spam.

• El Capitan and Canon scanner failure

  El Capitan does more work with Canon 5600F scanner. New driver and supplied Canon software update and the new driver did not work either. A solution? A different software? This new scanner flat works with El Capitan?

  LDBennett

  Take a look at VueScan. Your CS5600F is presented as a supported scanner.

• I have two connections. Canon scanner works on one, not the other.

  I have Vista with two connections. On one login my scanner Canon 5000F works very well. On the other hand, it won't work at all. When I go to scanners and cameras in Control Panel, the scanner appears. If I select properties and use the Test button, it tells me that the scanner is not working properly. But when I select Scan profile, I told myself that no scanners were detected. This happens on both connections. Why the scanner does not work on one of them?

  I downloaded the latest driver from Canon and the latest CanoScan Toolbox.

  I want to get rid of the connection that the scanner works on. What should I do?

  You can try to uninstall the scanner > remove this connection > reinstall the Scanner.

  See you soon.

  Mick Murphy - Microsoft partner

• Canon Scanner incompatible with Windows 7, 64-bit

  I have a scanner, Canon Canoscan LIDE 30 that I LOVE dearly, and she doesn't have any listed driver that is compatible with Windows 7, either 32 or 64-bit. WHAT SHOULD I DO?  I don't want to throw it away or giving it!  I have to keep my old laptop to use it with Windows XP?

  "Tuscola_Dad" wrote in message News: 6a07e1f6-45ac-46a7-bf0f-26adb3d053c2...

  I have a scanner, Canon Canoscan LIDE 30 that I LOVE dearly, and she doesn't have any listed driver that is compatible with Windows 7, either 32 or 64-bit. WHAT SHOULD I DO?  I don't want to throw it away or giving it!  I have to keep my old laptop to use it with Windows XP?

  VueScan works a treat with the Lide 30.  I have one of those too, and it's the ONLY way to make it work...
   
  http://www.Hamrick.com/
  
  --

  Mike Hall - MVP Windows Experience
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Canon scanner using ms instead of Canon drivers

  Printer: Canon MG5200
  Driver scanner Windows 8 is way dumbed too. The user doesn't have enough control with the scanner. "Custom settings" don't work anymore.
  See this screenshot: http://i64.photobucket.com/albums/h186/gymnart/Dumbscancontrols_zps52facc2f.jpg
  This is the driver that I downloaded from the own Canon Website:
  xp68-victory-mg5200-5_56 - ejs.exe

  To scan over the network:
  System uses the Microsoft driver and NOT the one for Canon scan. Scanning is invoked by wireless network.
  (8-64 bit Windows) computer must use the driver Canon NOT Microsoft!
  When you try to change the settings of the scanner with settings for the Canon of the window page, there are 2 to choose: the first is the Microsoft driver (Canon 5200 series WS) and Canon (Canon 5200 series XPS). When I choose the XPS one, he tells me that it cannot connect to the scanner. However, it IS on and has been on and ready. The system only allows me to select the driver WS.

  There is no problem with Windows 7. This system uses the Canon driver for both printing and scanning. With this one, you can choose if you want to scan in grayscale or color, and when you adjust the brightness/contrast, it shows you what looks like the real project. With version dumbed down as Windows 8 insists on usage, you do not get these controls.

  How to tell the system to stop using driver MS and switch to the Canon driver instead?

  Printing over the network works fine.

  At the printer off when you installed the drivers from the Canon site?

  Windows will use its drivers, if you connect the printer / turn on and connect to a USB port

  Usually, you need to install the drivers then wait FOR installation, for you say to connect / turn on the printer. Then it will install the drivers for Canon

• MF4770n of Canon scanner not working not not on Windows 10 x 64

  The printer works fine without any problems, but the Toolbox (to scan documents) does not work. It does not detect the scanner. Y at - it an update for this printer for windows 10 soon help? Or y at - it another way, I can't do this?

  Thank you

  The drivers have been updated for WIndows 10. Scanner works perfectly on the network.

• Not able to use my Canon Scanner model CanoScanFB650Ui with Windows 7.

  I'm not able to install my scanner CanoScanFB650Ui I use Windows 7, probably compatibility issues. How can I solve the same?

  Have you tried to install in compatibility mode?

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > chose the operating system

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Canon LiDE 700F scanner driver for OS10.11

  Since the El Capitan upgrade my Canon LiDE700f scanner is not recognized.

  I can't find a new driver for OS10.11 on Canon website.

  Any advice?

  Hi Alan_20,

  I understand that you are looking to get your Canon scanner to work with your Mac after upgrade to El Capitan. According to our records, there is software available for this device. It may help to check the software updates (via the Apple menu) before you connect your scanner.

  Look for software updates before connecting your printer or a scanner. This updates the list of the most recent supported on your Mac printer and scanner models. If you do not check the updates before trying to connect a new printer, you won't see the software available when you connect your device.

  Canon CanoScan LiDE 700F *.

  4.1.0a

  S

  Printer and scanner software available for download for your Mac
  https://support.Apple.com/en-us/HT201465

  If you are still unable to get your Mac to recognize your scanner, the next step would be to reset the printing of your Mac system.

  Mac OS X: how to reset the printing system
  https://support.Apple.com/en-us/HT201539

  See you soon!

• How to use the scanner Canon of my computer with Windows Vista?

  How to use the Canon Scanner of my Toshiba with Windows Vista computer? Need help, tq.

  How to use the Canon Scanner

  http://www.ehow.com/how_5796443_use-Canon-flatbed-scanner.html

  I would propose Canon Support and the knowledge base for information and manuals

  http://www.USA.Canon.com/Cusa/consumer/standard_display/support

• Scanner Canon CanoScan 3000F color Image

  Now that I have Windows 7 I find that this scanner is no longer supported by Canon to update the driver. Is it possible to use this device or I'll have to, scrap it?

  VueScan now on the 3000F

  "VueScan works with the Canon 3000F under Windows.

  You must install a Canon scanner driver to use this scanner under Windows. Unfortunately, Canon has a driver for this scanner for Windows x 64. »

  The second paragraph contains the stumbling, because there is no installable driver of Canon for the 3000F.

  Many scanners is taken in charge by the pilots in Vuescan, but not all unfortunately...

• Scanner Canon CanoScan LIDE 200 works, MP Navigator EX 2.0

  Canon scanner CanoScan LIDE 200 works, mænd program MP Navigator EX 2.0 is op of hold that work, which has afinstaleret the and gen installed, a God until for a few days ago, there is no Ude which can help with works Igen MIG, pa advance tak

  Hello Erik,.

  Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Canon CanoScan LiDE 30 48 bit USB PC/MAC Scanner

  Does anyone know of a fix to allow me to use the CanoScan Lidfe 30 with my Windows 7 PC?

  There is workaround to VueScan 9

  It works well according to this Canon Scanner incompatible with Windows 7, 64-bit thread

• Image capture (10.9.5, Canon printers) makes the black scans

  I used a Canon MP210 all-in-one with my iMac8, 1 and I've updated to the Mavericks and it worked fine for awhile, but then last week I started having PDFs or TIFF scans that were either black (in general), or for most of black with a square image in the lower left corner. The preview scan looks perfect on screen. I thought that the scanner was dead and I needed ink anyway, so I bought a Canon MG2520. No help. I discovered that if you touch "Restore defaults" under "Correction of Image", you would get a real analysis. Unfortunately, the ink on this print is light and has need of adjustment of the threshold, and which is applied, it goes back to all black. I deleted the scanner in the systems preferences and manually loaded the ICA of Canon driver, nothing helps. The Canon scanner software gives me no picture at all. Image capture 6.3 has under file: take the photo (in gray) and close. Can someone help me to make this thing work in the way that he used?

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite