Canvio Basic 2 TB suddenly stopped working after Xbox update?

While to say that the title of the hard drive has stopped working once an update has taken place on the Xbox one a few days ago.

Now I tried it on a different Xbox one (didn't read), and also tried on a computer laptop windows 10 has yet no chance, at first he tried to install it but only got up then stopped, but even after having passed, still nothing, now its there if I go to device management (depending on whether its fine) but I can not even open the hard drive itself.

I've had it for about 6 months maybe a little more, but still is it safe, placed just behind the xbox connected, never needed to move it.

I hope someone can help or suggest something, but im now puzzled.

Thanks in advance.

I have the exact same problem mate

Tags: Toshiba

Similar Questions

  • Capacity wireless suddenly stopped working after an update of Windows Vista.

    Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

    original title: can't find the wireless device

    Hello again, Kathy,

    More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
    Look for something listed as network radio or wireless card and make sure that it is set to enable.
    The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
    A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
    WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.
  • laptop keyboard stopped working after Windows update.

    have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

    As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

    It suits it much of the time.

  • My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

    My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

    NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

    olou,

    If the suggestion on possible recording by Larry fails, see this page

    https://www.Adobe.com/account/my-products-services.html

    I'll try to ask a personal forum friend who knows what to do.

    For download, read this

    http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

    and update, see

    http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

    http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

  • Updates Windows 7 suddenly stopped working, stuck at updates

    Original title: Windows 7 updates

    MS has stopped supporting Windows 7? Like many others, my updates of Windows 7 suddenly stopped working last month. I do not install a new or fresh, version but simply by doing what I did every month for a long time and trying to install the latest updates. Windows Update is just to 'check updates'. I left on for more than an hour several times. I tried each 'fix' that has been suggested. Nothing has worked. So, I resorted to the Windows Update Catalog check manually and I noticed that there were no new updates of Windows 7 security for may 2016. Why?

    If all updates appeared and installed then reset the update system is a good idea.

    I prefer this small utility

    Use Option 2 on the list after right click and select run as administrator

    https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc

    Download in your downloads folder

    Right-click and select extract all in the downloads folder.

    Then right-click on ResetWUEng and select run as administrator

    Follow the rest of the guides messages

    Press any key to continue

    Type 2 for this Option in the list and the Enter key

    Press on y for Yes I think twice

    After that that he completed

    Type 15 for this option and the Enter key to restart the machine.

    Must they will restart in 60 seconds will save your work... Press a key to continue.

    After reboot, go to windows updates and manually check the updates shouldn't take a few minutes.

  • Satellite L350 - pad stopped working after BIOS update

    Hello

    The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

    Any ideas?

    Concerning

    The value of the default BIOS and test it again.
    NUMLOCK button works (LED on / off)?

  • LifeCam has suddenly stopped working after many years

    Original title: problem with my Microsoft Lifecam VX-6000

    Problem with my Microsoft LifeCam VX-6000.  I used my LifeCam several times when using Skype, but now it will not work.  I examined a large number of questions and answers that are listed in the support forum but nothing I found fixes my problem.  I am running Vista Home Premium on my HP #SR5050NX PC with a 32-bit operating system.  I used this webcam for many years without any problems, but now it will not work.  I reinstalled the current drivers on the Microsoft site and it appears in Device Manager that the drivers are correct for the LifeCam VX-6000 webcam.  When I try to open Microsoft LifeCam it locates my camera and the green light comes on but no picture.  When using Skype, he finds the camera LifeCam 6000 but gives me a message that it cannot use this device because it might already be in use by another application, but no other application works.  I have also a Cisco Webcam that I have in the past to select which camera I wanted to use while Skyping but he stopped working at the same time my LifeCam 6000 ceased.  I get the same message... This webcam cannot be used because it might already be in use.  The drivers are correct on this camera as well.  What can I do to fix this?

    Thanks, I appreciate your help and your support!

    datgrt

    Hello

    I suggest you to return these items and check if it helps:

    Troubleshoot failures to find the new LifeCam hardware

    http://support.Microsoft.com/kb/929087

    Don't troubleshoot bad or no video or problems to start the LifeCam software

    http://support.Microsoft.com/kb/933310

  • Some keys stop working after the update of the Sierra (only for a specific profile)

    After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

    The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

    Anyone know what that sometimes caused that and with the fix is?

    Hello ExcelsiorPath,

    After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.

    If the other keys do not work

    You may have accidentally set an option that changes your keyboard works.

    • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

    • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

    • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

      To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

    macOS Sierra: If your keyboard does not work

    Thank you for using communities of Apple Support. Good day.

  • "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

    I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

    I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

    PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

    The best way for me to trouble?

    Hey punchcard4rjw,

    Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

    If this does not work, you should look the article How to fix preferences that will not save.

    Hope this helps!

  • HP Support Assistant stops working after the update

    message says:

    hpsf.exe has stopped working

    HP ENVY 17-2070nr PC windows 7 64 bit laptop

    Hello

    Try the following

    Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    When this has completed, restart the laptop.

    Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

    http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

    After installation, restart the computer again.

    Kind regards

    DP - K

  • X 500 - 10W QOSMIO webcam stop working after Windows updates

    Hello.

    I have a Toshiba QOSMIO X 500 - 10W PQX33E-00R00CIT.

    When I format my laptop and you reinstall the operating system Windows 7 Ultimate 64 bit, the webcam works perfectly.
    After I updated windows via windows update webcam stops working. Also with Windows 10 company LTSB. What should I do? Thank you.

    P. S.
    According to me, is just a problem of software, not hardware. The webcam works perfectly until I do the windows updates! ' * ' Microsoft!

    I find the problem. Do not install the latest version of Microsoft Silverlight. I hope that I formatted my computer for the last time!

  • Satellite A200 - Touchpad scroll function stop working after BIOS update

    Hello

    After that I updated the BIOS (drawn from the Toshiba site), the scroll function stop working. I can still click, move the mouse pointer, but can no longer navigate the touchpad. Relocation of Synaptics driver is not the problem. The strange thing is that the computer detects only my touchpad as standard pointing device (port: PS/2) device. "Graph of pressure" and "Moodpad" function also stop working and complain "this program requires a Synaptics TouchPad, and the Synaptics Pointing device driver.
    My computer is Satellite A200 PSAE0C-TR605C.

    Anyone know the reason?
    Thank you

    Danny

    Hello

    What operating system is installled and which is more interesting: what version of BIOS you have installed? Why I ask? Because there are 2 different BIOS versions, one for Vista (1.80) and one for XP (5.20) which means that when you Flash a BIOS XP on a computer with Vista installed then some functions do not work properly as the FN keys or the touchpad.

    If please check this out and make sure you have the appropriate BIOS installed.

    Welcome them

  • Satellite A105 shift stop working after BIOS update

    I have a stack of boards of laptop of the A105 (Intel chipset) series that I received with the wrong BIOS. Both worked, and I updated the BIOS on them to solve CPU compatibility issues. After that, the shift keys stopped working and pressing Shift-A causes the power led to decrease in intensity. Return to ANY BIOS version, either by the Windows, CD or floppy disk of crisis recovery program (magic key is 'F', not 'B', 'Esc' or 'U'), does not solve the problem of the keyboard.

    To make things more confusing, I've noticed that single BIOS one that actually seems to correct the problem is version 1.50, which I have not seen available for any Tecra A7 or Satellite A100/A105, with the exception of a few 100, but the BIOS file is too small and cannot be loaded.

    Anyone has an idea why these cards Intel processor do that? Or did someone knows where I can get a usable version of BIOS 1.50?

    In the interest of this post, please consider my high level of competence. (In other words, I would be grateful for the people trying to help 'Replace the keyboard', but I have about a dozen keyboards, that everything I tried, and all work on other laptops. In addition, if you have just a theoretical solution, I'm certainly open to hearing. In addition, if a Toshiba tech would answer, I really appreciate it!)

    An update, it seems that the laptop from a different manufacture series show almost the same problem. There are certainly similarities of BIOS, since these Toshiba use the magic key to Fujitsu to trigger the block to start recovery from the crisis. I guess it's very likely that this problem is specifically a problem of Phoenix BIOS.

  • Outlook 2010 has stopped working after Windows updates

    November 11, 2015, my desktop, operating system Windows 7, installed about 28 updates to Windows. When I then put running the computer and open Microsoft Outlook 2010, Outlook closed almost immediately and this message appeared: "Microsoft Outlook has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "(I don't check other office software).

    After the problem with Outlook 2010, I rebooted the computer several times and each time has experienced the same problem with Outlook 2010.

    I used system restore to restore the system to before the updates of Windows, which included a critical update. Outlook, then worked correctly. I changed the settings for Windows Update to "Never check updates" so that Outlook is not yet damaged.

    Was it something wrong with the Windows updates?

    The problem was solved when Microsoft released a revised version of the KB3097877 update. Maxwell Joseph, moderator of the Forum Microsoft, announced this in the post, he created at 23:22:03 on November 12, 2015, on the thread titled "update KB3097877 crash.

    He said ' Microsoft has released a revised update, so we suggest you go ahead and uninstall Windows updates KB3097877 > installed updates. Restart the system and run the updates check and reinstall it back. »

  • USB mouse stopped working after system update

    I'm running Windows 8 here and it updates automatic system has run and disabled use my connected USB mouse (manufacturer: Targus | model: AMU4201EUK)

    When I search the drivers in Device Manager tells me I'm using the latest drivers available and can't seem to find a driver for this specific mouse online.

    I use an external keyboard connected via USB and works without problem so I'm lost as to why the mouse would stop working. He able to go to the mouse as the LED inside turns on when it is plugged. Windows made his usual sounds when its connected and disconnected from.

    This happened last week and to work around, I restored windows since the eve of the update and it worked without problem. Windows tries to install the updates again after a few days, then the mouse will become unusable. I've lost the ability to return to this State, now I'm sure that Windows has replaced something in this update.

    The mouse uses of Microsofts HID drivers that are up to date and I confirmed the mouse works on other systems and on my laptop USB ports are functioning normally.

    Any suggestion is appreciated.

    See this similar post semi for some additional options open to you.

    After update, windows 8 pro will not be closed or sleep with connect to internet
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/after-update-Windows-8-Pro-wont-shut-down-or-sleep/24bdbd5a-AEEE-4ADB-B470-7ef5685acb99

    Have you had a look in Device Manager for errors with USB devices?

    Use the Device Manager and uninstall the concentrators root USB and devices which show now on your machine.  Restart and let XP rediscover and see if that solves your problem.

    If you uninstall the mouse in Device Manager, then reboot, Windows should find the mouse and install the appropriate drivers.

    Uninstall or reinstall a device
    http://TechNet.Microsoft.com/en-us/library/cc725782.aspx

Maybe you are looking for