Canvio Basics 500 GB - F:\ error message is not accessible

Similar Questions

• Equium A100: CD/DVD drive wont read - D:\ error message is not accessible

  Hello.

  My cd/dvd rw drive will not read certain DVD/CD-ROM. I bought my equium (A100 I think) laptop, nine less than a year ago and have had this problem since I got it. The disk which do not work on the laptop work fine on another pc / dvd players, if the disc is not defective. At first I thought that it would be a driver issue because some of the disc worked fine, so I never got the laptop back to the store I bought.

  A message appears "D:\ is not accessible. The request could not be performed because of an i/o device error".

  I recently just got internet installed in my house and I went to the toshiba site to see if there are newer drivers that would solve this problem. I downloaded a bios update and an update of dvd ram and installed, but am still having the same problem.

  Can someone help me cause am totally stuck on what to do now.
  Thank you.

  Hello

  As you have probably not known the CD/DVD drive support not all backgrounds.
  In the user manual, you will find a list of supported CD and DVD

  But I assume that you are the reader cannot read certain media because of the impure registry as this other thread mentioned:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

  Please check that the user holmdps has solved this same problem.

• I get this error message, "could not not use the tool pen because of a program error."  What should I do to fix this?

  Like the above statement, I get this error message, "could not not use the tool pen because of a program error."  What should I do to fix this?   I use PhotoshopCC a lot for work, so if someone could help me quickly, I would be grateful.

  Please read this and acts accordingly (restoration of preferences after making sure all custom presets, actions, patterns, brushes etc. have been registered may be of special interest):

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

  http://forums.Adobe.com/docs/doc-2325

• Compressor 4, 4K of MXF ProRes 4 k files, the error message, codec not installed

  Hello
  When you try to convert MXF 4 K in ProRes files I get an error message "codec not installed." I just bought 4 compressor andean can't seem to find a solution because it seems that I have updated with the latest version. Does anyone have a solution to this?

  Strange thing is FCPX can load and process the MXF files...

  In Information systems > facilities see if video Formats 2.0.4 is installed. If not, you can download here.

  Russ

• Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

  Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
  behavior when you access security features.

  See:

  • https://support.Mozilla.com/kb/could+not+initialize+the+browser+security+component

• upgraded to 3.6, bookmarks, lost, lost the toolbar bookmarks, bookmarks library, lost cannot go to the previous backup, error message. Not have Torbutton. Cannot save new bookmarks. AutoFill remembers. Don't forget the story is about.

  upgraded to 3.6, bookmarks, lost, lost the toolbar bookmarks, bookmarks library, lost cannot go to the previous backup, error message. Not have Torbutton. Cannot save new bookmarks. AutoFill remembers. Don't forget the story is about.

  I got this yesterday after the 3.6.4 problem upgrade. I'm not sure if I saw all the things you did, but I have def lost all bookmarks and the back button. I fixed it by:
  1. go to the Firefox profile directory, which for me is here but 1st bit will be different for you as mine work specific:

  C:\Documents and Settings\U049177\Application Data\Mozilla\Firefox\Profiles\soez0lvk.default
  2 delete places.sqlite and places.sqlite - journal

  3. start Firefox (you should have the back button now works but not Favorites, he recreated to these 2 files)

  4. in the menu, bookmarks and then organize bookmarks, then button import and backup, then restore, then select a day to restore from. You should now have your backups Firefoxes bookmarks.

  Hope this works for you

• OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  I get this message (error) after update my customer Oracle 9.0 to 10.1 (used in the .net Oracle connection)

  I would like to get a resolution? If someone has experiece with her.

  THX

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN Forums.

  NET Framework

  http://social.msdn.Microsoft.com/forums/en-us/category/netdevelopment

• I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage. You may not be allowed to write on the destination path. »

  I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage.  You may not be allowed to write on the destination path. "I'm on my admin account, so I should have permission to play where I want to. I did have this problem before with Windows 7. Is this a problem in Windows?  Y at - it an easy fix?

  Have you tried to manually install the hotfix by clicking on it, and as an administrator?

• Error message: "could not cop files. Make sure that the target disk is not dead", during the installation of the drivers scanner Epson Perfection V500.

  Original title: the scanner driver update problems.

  Problem: I am trying to install a driver for an Epson scanner update.  I get the error message: could not copy files.  Make sure that the target disk is not read-only.

  I'm running Windows XP Home edition.  Scanner is an Epson Perfection V500 Photo.

  What I did:

  • A release with the support of Epson.  They tell me that I have the admin rights.  However, I am the administrator and log on as administrator
  • I downloaded the epson driver update, which is an executable zip file.  I right-click on the file, select Run As..., opt to run it as an admin user, enter my password and select run.  The files are decompressed, but at some point in the installation, I get the message "couldn't cop files.  Make sure that the target disk is not read-only.  (Target is C:\)
  • Furthermore, I installed this driver successfully on my other computer that is running Windows XP Professional

  Why not copy the driver files?

  Hi Passport35,

  You can try the following steps and check if it helps.

  Method 1:

  You can try running the fixit article and following cjheck, if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

  Method 2:

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  a. click Start, click Run, type cmd in the Open box and then click OK.

  b. at the command prompt, type sfc/scannow, and then press ENTER.

  Note: the scan may take a while, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Wait for the analysis of complete and then check if you can install the drivers.

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• Fax and Scan Error - Message could not be sent. Media is write protected

  I have a PC with Windows Vista Ultimate on it.  Turns off user access control.  On the sign as Admin will have all the rights.

  Windows Fax and Scan works very well for a long time.  Had a modem comes to shove, he replaced everything works fine.

  In the last day or two - with no known changes to the system - the system is no longer send and receive faxes.

  It gives me an error-"message could not be sent.  the media is write protected. »

  This happens if I try to send a fax directly from the Windows fax software or if I try to "print" a document by fax.

  When you receive a fax - it gives a similar error.

  It works as records receive faxes are unalterable and, if I look at their properties in Explorer.  I try to uncheck Read-only and it acts like it works only when I get back - read-only is still selected.

  Other times I tried to make changes to access to the files by Windows Fax, fax settings - but it tells me that I have to be logged on as administrator to make these changes and I signed up as an administrator - the only Director on the PC.

  I also removed the Fax profile and recreated.  I think that the question is the property read-only on my directory of fax, but for some reason that seems locked on.

  I also shot the back, rebooted, turned off UAC back, rebooted and tried to change the settings of RO, no luck.

  Any ideas or suggestions would be greatly appreciated.

  Thank you!

  Read-only for folders is normal (mine are).  See if this fix works for you:

  Fax Error: The message could not be sent. Media is write protected

  If the registry change is useful, please let us know.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• Error message: can not find script file "c:\". WINDOWS 32\system\windows.db»

  Original title: error message: can not find script file "c:\". WINDOWS 32\system\windows.db» Help!

  After starting my Vista laptop, I get the error message: can not find script file "c:\". WINDOWS 32\system\windows.db» The mouse cursor freezes and I can't do anything on the PC. The PC will run in Safe Mode help!

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Receive error message "is not a boot disk" problem when starting Vista

  I need help!  I used Ubuntu for a class exercise.  When I have finished using the bootable cd and tried to go back to Vista I get the error message "is not a bootable floppy.  Please insert a bootable floppy disk and press a key to try again...? »

  starting the PC and if you see the splash screen, immediately press "esc". You should have an option to select your hard drive. Use the arrow keys to select and press ENTER to start Windows Vista.