Captivate 7 - Quiz questions take a long time to advance to the next

So I have completed my course. All along (each slides or so) I quiz questions that are classified but undeclared. They are simply there to prepare the student for the final exam. They have the opportunity to submit the response followed legends correct and incorrect. At the end of the course, the trainee meeting these same issues (55 in total), but now they are back to back and they are both classified and reported. Here, they have only the option to submit.

When they take undeclared quiz questions, click on submit and it quickly goes to the next slide, because it is set up to do. BUT on issues that are noticed and reported, when they click on submit, it really takes a lot of time to move to the next slide (and a lot of time, I mean 10 more seconds). At the end of the review, when they answered the final question, and click to go on, the two final slides take more time (sometimes up to a minute) to move forward.

I understand it is going to be some delay while the system reports the score for each slide, but this seems abnormally long. This shift occurs in preview mode, scormcloud and during a test on a LMS (Gyrus) client.

Any idea on why this is and how to prevent it. It's really hard to ask my customers to be patient and stay there for 10 seconds every single issue. I need them to take the final exam at their own pace - fast or slow.

Thanks in advance,

Arthur

I know, it is barely visible, because the line between the inactive and the Active part is black on a blue background (already invited for 6 or 5.5 to change that color...) You will need to go over it all in the middle of the timeline until you see the line double cursor appearing and you can put:

Go to the next slide makes them faster. I had no problem with our LMS, but read on this forum (you know that I am often here) that some have done so. No rule of the world, by dragging the break more towards the end has almost the same effect, but you can leave a little bit more time (less than the 1.5secs).

As I know there is no way to change the sleep time by default for Question slides, as the timing is never available on Quiz Master slides.

Tags: Adobe Captivate

Similar Questions

  • Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

    Device: BlackBerry Z10
    Model: STL100-1
    Software version: 10.2.1.537
    OS version: 10.2.1.1925
    Carrier: Beeline (KZ)

    Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

    Tried to activate or disable this setting, the result:

    On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

    Off - 1 min 17 sec

    What is the problem of the time difference?

    Good, thanks

  • Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

    After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

    I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

    Just curious if anyone has encountered this kind of slow startup time and found a solution.

    Thank you!

    I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

    http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

  • Still burned DVD takes a long time to load into the reader

    I created a DVD in Encore CS3.  The final DVD is approximately 60 minutes and has 4 menus created in Photoshop CS3.  I purchased the Dolby converted in first and used this file as PCM format indicated by a friend vs.   The DVD works fine but takes a long time to load in one of my DVD players.

    A Sony player, it takes between 40 minutes and up to 70 seconds to load and play the first menu.  Each time is different.

    (This same drive load purchased in-store Hollywood style DVD in about 15 seconds on average)

    In another Sony player my DVD on average about 25 seconds

    A Panasonic player, it takes about 15 seconds

    In a portable player from JVC, it takes about 8 seconds.

    That is what it is?  This DVD is created for replication in a large number, but I'm afraid the long loading time is a problem and you want to solve this problem before sending it to the wide for replication.

    Help, please

    Thank you

    EDM

    EDM,

    One consideration is that there is no DVD drive certified to play any burned DVD, only those press/replicated. Most do and do as well, with provisions, but some don't.

    Now for these provisions. High quality blank media will get a closer all the success, just like using a slower speed of the burn, as the max. These two considerations will get a close, as it is possible.

    What brand of blank media are you using? Verbatim and Taiyo Yuden are about as good as it gets.

    How fast you burn to? I would look into a speed in the middle of the range permitted by the combo of speed by the media and the burning speed. Slower is better than more fast.

    As Stanley, there may be differences with r and + R media and players. There has been much more a problem, but some players still might prefer a vs the other.

    Finally, when you say "replicated", do you mean that you send in a DLT to make a House of replication a glassmaster, where the DVD is going to be in a hurry? If Yes, these replicated discs will be like the Hollywood DVD and will be NOT burnt, as was your test drive. The question will be moot with these, as they will be DVD-videos, where your burned DVD is really a DVD - ROM.

    Good luck

    Hunt

  • Router now takes a long time to connect to the internet

    Lately my internet was very slow for example that if I opened a browser for watching youtube videos of my favorite commentators, it takes so long to load, but Monday about 2 days ago, everything has been loading web pages and videos, now it takes forever to load anything on the internet im confused on what the problem is:(s'il vous plaît aider)

    Hello

    ·         Did you do changes on the computer before the show?

    ·         You use Internet Explorer? If so, what version are you using?

    ·         You get the error message?

    ·         You are able to access other websites other than Google/YouTube Web site successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Why is my Internet connection so slow?

    Windows wireless and wired network connection problems

  • Help urgently needed! -User profile takes a long time to load and the rest of the screen with the message "Please wait loading profile service user.

    Hello

    Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.

    Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.

    TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.

    When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as

    Which allows to "allow only the local user profile".

    Allowing 'profiles itinerant Prevent password propagation to the server.

    This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"

    But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?

    Forums of evil: you want to Technet forums.  It's more domestic consumption...

    https://social.technet.Microsoft.com/forums/

  • Why my email almost freeze and take a long time to copy for the file?

    Sometimes it works fine after hitting send them as before. But there are others, perhaps a full minute then makes me want to try again... what he's working on.


  • XY graph sometimes takes a long time to update legend

    Hello

    I wrote a small piece of code that highlights (changes line width) the plot on the graph when we click a mouse on its name in the legend of the plot. The code works well except when I the legend scroll bar is visible and its position is not 0, then when I click on the name of the parcel, the chart takes a long time(>4s) to change the width of the plot on the legend. The plot on the graph is updated instantly. Its only the legend of the plot that takes a long time to get updated.

    I enclose the code here... Please, run it and see if you also see the same behavior.

    Thank you

    Ritesh

    Hi Ritesh,

    The patch of f2 is already released. http://www.NI.com/download/LabVIEW-development-system-2015/5656/en/

    We will inform you of the R & D of your first question, but unfoturnately we cannot provide information on future products releases.

    Kind regards

  • The system preference takes a long time to load

    As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

    Data sheet:

    iMac (end 2013)

    Intel Core i5 at 2.7 GHz

    8 GB 1600 MHz DDR3

    1 TB 5400 RPM HARD DRIVE

    Intel Pro Iris 1536 MB

    I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

    I suspect that it is a function of low priority in the memory compressed algorithm.

    Upgrading to an SSD and it will rise to attention.

  • My computer is very slow and takes a long time to connect and disconnect

    Original title: sign out of questions

    My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)

    Install the background file. See if it suits it

  • Programs to freeze or take a long time to respond

    When I run new programs that they can take a long time to start or they freeze. This happens sporadically, but enough to be a nusiance. I followed all the steps listed under the section "fixit" of Vista Hoem premium and the maintence of the Vista Help sections section: I've defragmented, wipe the drive, run the system performance (overall score of 5.4 due to memory all other 5.9), has increased to 8000 MB swap file and several other steps. If I try to click on the program, while the little circle turns, my screen becomes a pale white and I can't do anythingfor several minutes

    Has anyone else had this problem and solved? I have a lot of space (free 400 G) and 4G of RAM.

    This happens anytime, not only after the machine has been for some time, given the previous answers to this question.

    Daniel Dixon III

    Hi Daniel,.

    What application are you trying to access?

    You can perform the clean boot, and then check if the problem persists. It will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

    The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

    Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

    Reference:optimize Windows Vista for better performance

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Video takes a LONG time

    Howdy, everyone. I am currently shopping around for a video editing application, and I'm using the trial version of Adobe Premiere Elements. I love everything about it so far, except for one thing. It takes a long time to save the final video file (from the tab share). I noticed he gets to 50% fairly quickly, probably within five minutes and at that time there the progress bar slows down to a crawl. It takes more than two hours for the last 50% complete. Is this rare or should I wait?

    Here's a little history of my project, in case this is useful.

    The video project is a little less than 30 minutes.

    On the sharing tab, I selected to export files for viewing on computers.

    The type of video I want is WMV (Windows Media). I can vary from this format. It is a requirement of the project.

    Image size: 1024 x 768. At the moment I can't vary that size. The video must be 1024 x 768.

    Frame rate: 30 fps

    Audio: mono 48 kbps, 44 kHz, CBR

    Codec: Windows Media 9

    Encoding Passes: 1

    Bitrate Mode: Constant (I also tried of Variable quality, but noticed no difference in time rendering)

    Maximum flow: 200 Kbps (the first time I tried 2 000 kbit/s, but I noticed no difference in time rendering)

    Image quality: 3 (I also tried 90 but once again without any perceptible difference when rendering time)

    My laptop:

    Windows XP Pro SP3

    Intel Core 2 Duo 2.2 GHz

    2 GB of RAM

    The window says that I would wait the video size to be 53MB in size, which seems reasonable. But when it finishes, it is more than ten times greater than this estimate. I don't understand why the file size is so big and the render time is so long.

    My rendering time is governed or strangled because I am using a trial version of Premiere Elements?

    If this is not the case, what suggestions you all for me? Am I be unreasonable while waiting for my render times to be faster than the duration of the video?

    Thanks in advance for your help. Please let me know if I can provide any other details.

    WMV is a highly compressed format/CODEC, and the duration of the treatment will depend on several factors:

    Your CPU, which is not as powerful in your case

    Your auxiliary I/o system, which is probably a single HDD on your laptop

    The source footage. What is your source footage?

    No effect added to the images. You have all the effects?

    Each of them will have an impact on the time required.

    The trial is that a single main limitation - watermark. Now, there are some components that need to be triggered, but are not tested, but they would not obvious with the import of your source footage, if it is a question.

    Good luck

    Hunt

  • How to get rid of the msg "...". is very large and may take a long time to

    Hello
    Simple question:
    How to get rid of msg "...". is very large and might take a long time to load... »
    I tried to increase the number of cells under "App settings-> options-> warn if greater than 5 000 000 000 data form. I even tried to '0 '. Nothing works planning 9.3.1

    Hello

    That's how I've always changed the number of cells, after which display the message on the forms of data.

    There are 2 levels of adjustment. You can configure the application level, but users must select "Use Application Defaults" in the planning of the preferences of the user parameters. To do this, use the file-> Preferences and select schedule.

    Otherwise, you can set the value of the number of cells at the level of the user for ' warn if data form more xxxx ". It should solve the problem. This should be the installation program if you have not selected checkbox default Application for the user in the preferences of planning.

    If nothing else works, it is very difficult to guess, I would open a SR with Oracle.

    Let me know if it helps.

    See you soon
    RS

  • APEX_UTIL & APEX_INSTANCE_ADMIN take a long time to display the results in the browser

    Hi gurus of the APEX.
    When I create a new workspace with and add a new user with the API
    It takes a long time until I can see the results in the admin interface apex I NTHE browser.
    Why is this?
    Someone can explain or do you have a work around to make it faster?


    Here is the code I use:

    BEGIN
    APEX_INSTANCE_ADMIN. ADD_WORKSPACE(1196509005817318,'WORKSHOP','HR',)
    wwv_flow_api.set_security_group_id('1196509005817318');
    APEX_UTIL. CREATE_USER)
    p_user_name = > 'MY_ADMIN ',.
    p_first_name = > "FRANK."
    p_last_name = > 'SMITH ',.
    p_description = > "Description...". »,
    p_email_address = > '[email protected] ',.
    p_web_password = > 'oracle ',.
    p_developer_privs = > ' ADMIN: CREATE: DATA_LOADER:EDIT:HELP:MONITOR:SQL',.
    p_default_schema = > 'HR ',.
    p_allow_access_to_schemas = > 'OEHR. "
    p_change_password_on_first_use = > 'n',.
    p_attribute_01 = > ' 123 456 7890');
    END;
    /


    Thanks in advance.
    BR,
    Lutz

    Hi Lutz,

    I'm going to ask the obvious question, please do not be offended ;)

    You remember to "commit" the end of it if you run via SQLPlus etc.?

    John.
    --------------------------------------------
    Blog: http://jes.blogs.shellprompt.net
    Work: http://www.apex-evangelists.com
    Author of Pro Application Express: http://tinyurl.com/3gu7cd
    AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

  • Firefox takes a long time to close since a recent update and memory of pigs.

    Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

    Upgrade your Firefox 9 browser and check

Maybe you are looking for

  • Adobe Flash Player and the Player r0 16.0 constantly stops working

    Since a few days now, firefox and adobe flash r0 16.0 Reader/Player does not correctly at all. If I find myself on a site like youtube or other sites with similar functions, I get bombarded several times with this message and can not do something. No

  • Save Link As/New folder/save/Firefox causes Crash

    Right click on a link and choose "save link as..." »Navigate to the location you want, then click on "new folder."Name the folder, and then openClick "Save".Firefox crashes--Restart and use the new folder or any folder existing and everything goes we

  • vision Assistant

    Hi, would you please tell me what can I do with this PIN 'Image In "? It is purple I tried a lot of experience, but the vision assistant insist to grab me something to this 'Image In' purple I tried to create the path of file (green color), I gave hi

  • Alternate click right key missing keyboard

    Hello I am currently using HP N012 TX. The keyboard for this laptop does not have a right click menu button! Na purchasig not see it, big mistake. I'm addicted to the use of this key. Y at - he replaced anyway I can get any other button or any other

  • OfficeJet Pro 6830: Scan to PDF files

    Is there software available that will allow the digitisation of PDF files?