Capture device offline help?

Similar Questions

• Camera connected but still showing "Capture Device Offline"

  Hello

  2 weeks ago, that I used the capture feature in Adobe first CC for the last time, with no problems. Yesterday I tried to capture a video cassette again, unfortunately not the capture window to say "Capture Device Offline". I can control my camera (rewind, playback, front, etc.), but just cannot click on the record button.

  I use the latest version of Adobe first Pro CC (automatically updated 19 days ago) and I'm trying to capture with my camera Sony FX1000.

  There are 3 days, my PC downloaded automatically updates Windows 10. This update is perhaps responsible for my problems?

  Thanks in advance,

  Justin

  From the Netherlands

  

  Hi Justin,

  The first thing, in the first of the Capture settings, make sure that it is set to DV or HDV you like to match the band being captured. The transport controls are the same for either, but the video data are very different between HDV and DV. That's why you can have control, but no video, the format is incorrect.

  The next thing to check - will record your DV or HDV camera. Windows detects DV and HDV cameras as two quite different. This same thing happened to me before - can control the camera, but no image. This is because the PC "thinks" he's talking to a DV camera when it is really a HDV tape you play, or vice versa.

  Look in the menu of the camera - you should see options to set the unit of "DV, HDV or Auto. I think it's under the option 'VTR '. Unit must be in VCR mode to see this option, not fashion ENR. Choose the setting to match the tape you want to capture, DV or HDV. Do it with Firewire disconnected from the PC. This will "force" the camera to DV or HDV output via Firewire. Turning the camera off, 1394 connection, turn on the VCR mode. Windows will beep when the camera connects and don't know what will do 10, but Windows 7 always put a small message at the bottom right of the screen. DV camera would say 'Caméra DV' and 'HDV' Save as "Subunit STROKE".

  If this does not resolve the problem, you may have to resort to using the Legacy 1394 driver in Windows. http://www.studio1productions.com/articles/FireWire-1.htm

  Follow these steps should help you back in business

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Capture device offline (Blackmagic DeckLink Studio 4 K)

  Just getting a new computer with 64-bit Windows 10. I use a Sony Vegas Pro 13.0 try and capture works very well. I close Vegas and load up Adobe Premiere Pro CC test, but the capture does not work. I get "Capture Device Offline".

  I use a Sony Handycam HD with HDMI, go to the map of the world BANK. I have the latest software/drivers for the card of the WB. As I said the Sony product works, but Adobe does not work. How Adobe that I buy a product that does not work.

  I tried to change the camera's 720 p, 1080 p and same 480i HDMI output modes. I tried DV and HDV settings in the software also. Hard, trying to find a page of diagnosis in the settings of the acquisition card, you know, like Skype from your webcam. But the only real parameters are "DV" or "HDV".

  Some help would be appreciated.

  You re - install the decklink drivers after installing the first test?

• Message to "Capture device offline" when you attempt to add additional clips from HDV camcorder, in CS5

  "Device capture offline" message when you try to add additional clips to an existing project in first Pro CS5.5.2.

  Previous capture has been accomplished, but, then, in trying to add additional clips of the same device, it failed.

  Every 40 minutes of excerpts of 185 was initially captured by using Sony Vegas Platinum 11 Moviemaker, without error. Additional clips of mt2 were then imported successfully into Premiere Pro after indexation, which conform clips, and they play perfectly well and high quality CS5.5.2 at 1440 x 1080i.

  Why the Capture device would be offline, where no physical alteration has been made to the equipment?
  

  Jeff,

  I'm now back at the base. Checked the anamorphic HDV on the server of the Studio and he was a con man, tired cable, the M6600 like me after spending six hours at an airport in China.

  Replaced cable and everything is fine.

  Thank you to all who tried to help.

  Bob

• Message "Capture Device Offline.

  I borrowed SONY camcorder a friend to film some footage. He suggested Adobe Premiere for editing. I downloaded the trial software, and now I'm trying to capture video. I had to buy a firewire card to connect to my computer. When I load the first, I go to the project and try to capture, but over a black screen it says: "Device of Capture offline." I am sure that my card and cable camcorder are all connected correctly. I guessed this because when I connected them all, the camcorder screen went from saying "16-bit" on "DV IN". I read a lot of topics on this forum, but the solutions do not appear to be exactly related to what's going on here. I checked my device manager and there is no exclamation mark next to the IEEE 1394... or its subfolder, VIA OHCI 1394...

  I'm only a little, computer savvy, so I hope someone can help. Thank you

  Caleb

  > borrowed camcorder SONY a friend

  If you don't have the manual of the device, Google for the exact model... or just go to Sony and seek... and find a download of the manual as a PDF if you can read

• Capture Device Driver evil run on the computer.

  Hello. I have a USB capture device that worked very well until I think it's the video editing software that it was bundled with the damn. I uninstalled the video editing software (was too big for my computer anyway) the device and its driver manager several times, but my computer won't recognize when I plug. The bubble of installation indicates that she installed correctly while Device Manager only lists it as an unknown device (he used to list by name) and properties manager says that a driver is not installed, while at the same time told me that the best driver that it is installed, it indicates also that it is plugged in audio wise with the chime you hear when you connect a USB device , but immediately after chimes that it was unplugged, even if it is not. What is happening here and how I might be able to fix? Windows recommends a replacement, but I hope it won't be necessary. The device driver manager is installed in the menu programs and features, and the USB driver is installed in Device Manager.

  Hello

  Please contact the Microsoft Community.

  I wish that refer you to this article for assistance more-

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  We know if you need help.

• Device offline in EP 3

  I use PE 3 years on my old Windows XP PC.  I'm trying to make it work on my laptop which is now my main computer. The laptop uses Vista. Install goes OK, but when I try to capture (with a Firewire connection) I get the note "device offline.  In the section of the device menu options, "check state" says "Online".  I tried almost every combination of setting, but always the device in offline mode message keeps coming up.  I tried my setup again on the old PC and it still works on this machine, but I try to the commission because it is too slow.  Is there a reason well known for what works is not on the laptop until more date that I may have missed?  I know PE3 is old technology, but I love it and am used to it.  The laptop has only a 1.83Gh processor, otherwise maybe I tried to try EP 10, which requires at least 2Gh.  Thanks for all the responses you have ay. David.

  First of all, make sure that this program includes the hotfix that updates to version 3.02. Version 3.00 will not correctly work under Vista.

  Then manually, go to Windows Update and make sure that you have even updates not critical. Especially with Vista. These non-critical updates frequently include important driver updates.

  This is your best bet. However, one clocked at 1.83 ghz is not enough to make a montage with any version of the program, unfortunately. (Are you sure that's not a dual-core processor? I'm surprised even Vista will run on a clocked at 1.83 ghz!)

  You can also just edit standard definition video - ideally miniDV video tape - in version 3. You don't say what model of camcorder that you work with, but you may find it very frustrating to do any serious video editing on a laptop of low power. I'm sorry.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• HP 15 ac189tu not find the bluetooth device please help me

  HP 15 ac189tu not find the bluetooth device please help me

  PLEASE HELP ME

  Mr President

  I found the solution

  I have install MS 72552.exe

  & his departure find device

  Thanks for supporting.

• movie maker error: a video capture devices are not detected

  Filmmaker gives the following statement. A video capture devices are not detected. My camera is plugged in and turned on. This has not happened before.

  What is it?

  How is it connected?

  Filmmaker works with mini camcorders dv connected FireWire, the firewire driver is installed by microsoft, you should not need to reinstall it, apart from a few special cases.

  This device and cable worked before?

  If so, what was the alst time and have you made any changes to the computer since then?

• importing video WMM-"video capture device not detected...". »

  try to import my movies from my canon camcorder. When I try to import into WMM I get this error "a video capture device it not detected. check a device is turned on and connected to the computer correctly. I use my usb cable that I use with my canon photo camera. It allows to work with two cameras, now he's going to transfer the images from the camera but I get nothing of the video camera. do I need a driver? or a new usb cable for the video camera?

  When I try to import to corel DVD maker I get "no capture driver is available in the system.

  try to import my movies from my canon camcorder. When I try to import into WMM I get this error "a video capture device it not detected. check a device is turned on and connected to the computer correctly. I use my usb cable that I use with my canon photo camera. It allows to work with two cameras, now he's going to transfer the images from the camera but I get nothing of the video camera. do I need a driver? or a new usb cable for the video camera?

  When I try to import to corel DVD maker I get "no capture driver is available in the system.

  ========================================
  What is the model of your Canon camcorder? If records to
  media other than mini DV tapes, it will not import into Movie Maker.

  Also... USB is not the best method to download... Movie Maker
  has been designed to work with FireWire.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• This is a video capture device?

  Anyone know what it is? It came with a workstation about 5 years ago. I was under the impression that it is a video capture device, but I don't understand why there is a vga (?) connector on the end. Or I guess it's a connector series 15-pin. How can you "entry" for a video card? What do you give him? I suppose it could simply convert entered composite/s-video for a serial output, which then connects to a real video capture card. Isn't it? Video capture devices do not have their own composite entries?

  If it is in fact a video capture device, is there a manual for this? How to use it? Is it good?

  

  Thank you

  -Ron King

  
  

• Pinnacle Systems - Streaming Media and Broadcast - Pinnacle PCTV 100i PAL Capture Device

  I have a Pinnacle PCTV 100i PAL Capture Device and do not work in Media Center, anyone have this problem? Thank you

  Hi Juan,

  What happens when you try to connect to media center?

  I suggest you download the software and install in Windows 7 and check if it works with media center.

  Pinnacle forums and support:
  http://forums.pinnaclesys.com/forums/348/ShowForum.aspx

  http://Corel.force.com/Pinnacle/pselectProduct?lang=en

  I suggest you to post us with more details so that we can provide assistance on the issue. In the average then please visit Pinnacle forums and tutorials for more information.

• Windows 7 Ultimate compatible driver for Philips SAA7130HL Multimedia Capture Device?

  Where to find the compatible driver Windows 7 Ultimate for Philips SAA7130HL Multimedia Capture Device?

  Hello

   

  Method 01:

  I would say go to devices and just by clicking on the Device Manager and updated driver for the device and check if you can get the drivers.

  Open the http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager Device Manager

  If you have the drivers CD, you can try to install the drivers and see if it works well or not, can also try compatibility mode.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

   

  Method 02:

  I suggest you to check the Windows Update to see if a driver is downloaded and installed automatically.

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I suggest you contact Philips for support with this device:

  http://www.support.Philips.com/support/contact/contact_page.jsp?userLanguage=en&userCountry=us