capture images with multiple loops of evil while

Similar Questions

• Captive to capture images with the Nikon D7200?

  Is it possible to captive capture images with the Nikon D7200 in Lightroom cc? If this isn't the case, it will be possible in the future?

  Best regards

  Johan

  Hello

  Please upgrade to the latest version of Lightroom, and the question to tie with El Capitan will be resolved: keeping up-to-date for Lightroom

  Kind regards

  Tanuj

• To create a ToolTip text for the image with multiple image map links

  Hello
  
  RH6 using, that I imported a picture into a topic. For the images that I have created several maps image to post a link to other topics. However, I can't create a map image additional to that same image that includes only the screen Tip text. I get a message of invalid value: "Please select a file, bookmark or topic to bind the hyperlink to.»
  
  Is there a way to create a popup only the text of an image with multiple image map links? My final output will be to WebHelp but possibly migrate FlashHelp in the near future.
  
  Thank you
  
  FMnRH
  
  
  
  Thank you
  FMnRH

  If the image is at the beginning of the subject, or all alone in a reference topic, you can put "#" (without the quotes) as the link for each area reactive.

  If the image is larger than the viewing window, it can jump to the top, but only if the user clicks on the link.

  I tried wz_tooltips and like it. I agree with Leon, it will take time for the first image but maybe go faster later.

  Harvey

• How to make a single image with multiple clickable points?

  Hello

  I just started using CS4 yesterday, but am quite confused. I managed my first realization with it, but am troubled havign. I don't yet know the capabilities of the software to be honest, but I would like to know if I can have one image, then have sections of it that can be flown with a tag and a link to another part of my site. Is this something that can be done?

  Thank you!

  If you click on your image in Design view and go to the properties panel > window > properties, you will see 3 blue icons down in the lower left corner. You can choose one and get a "hot spot" on the image. When you draw a hotspot Dreamweaver will provide you with an option to associate a link with it.

• Acquisition of images with 3 USB cameras causing too many uses of the memory/cpu

  Dear experts,

  I'm trying to capture images with 3 cameras USB, located in 3 different positions. I have to initialize each cameras using USB list vi camera when switching between cameras. I realize that, by making this method causing too many uses of the memory/cpu and can cause CPU hang up. If I stop the program, the memory/cpu counter are down.

  Do you know how to reduce this problem.

  Thank you

  Hart

  
  

• Having problems capturing the image with 2 cameras and the PCIe-1430

  I have problems of switching between my two cameras and breaking or capture images in Labview or MAX. I can switch between cameras and capture images very well so that in the Vision Development Module, but not in Labview or MAX. However, it does not work the first time I have capture an image of a port, but not after that.

  This the error I get LabVIEW:

  1074397150 error occurred at Snap.vi IMAQ

  Possible reasons:

  NOR-IMAQ: A timeout error has occurred while you wait for it
  specified event.  If you expect a picture, check that all the videos
  data are acquired during the period.  If waiting for a
  signal, check that the assertion of signal occurs within the time limit
  period.

  This error I get from MAX:

  The IMAQ error

  Error 0xBFF60022

  A timeout error occurred while you wait for the specified event.
  If you expect a picture, make sure all video data is acquired
  during the period. If you wait for a signal, check that the
  affirmation of signal occurs within the time limit.

  The following list is what I currently use:

  1 card PCIe-1430

  2 cameras JAI Pulnix CM-140MCL

  LabVIEW 9000 f3

  Vision Assistant build 20090611041452

  MAX 4.6

  NEITHER Vision 9.0

  IMAQ 4.3

  
  

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• Limiting errors while working with multiple connections

  I am currently evaluating Developer SQL and I'm looking for most of the features that allow connections several clearly distinct to avoid DBA errors when working with multiple connections in parallel.
  Currently, it seems that developer SQL provided these features:
  -Organization of folders in Explorer-> for example, we can create a folder per environment (DEV,...).
  -name of connection-> each user can define his own name. These aliases will appear in the tabs and the title of the main window when opening a connection.
  
  These features ar fairly limited if you compare with a tool like Toad, which used to associate colors with connections (good feature!) or define custom fields. In addition the database user is not displayed in the SQL Developer interface, unless we add in the name of the connection...
  
  Do you know if there are plans to improve these features in future releases of SQL Developer?
  Or, otherwise, it would be possible to quickly develop a plugin that can provide? (especially on the colors of connections)
  
  Thank you.

  Hello

  I opened the application, and you can add your voice to this. This isn't a feature that we can control, nor is it something that you can expand as it should be expelled from the underlying IDE. We requested a change in the IDE so that we can implement this improvement.

  Sue

• Acquisition of data from multiple loops

  Hello

  I tried to adopt a program of data acquisition of multiple loops with control of queue, but it does not work as it should. (Or at least the way I think it should) Could you please help me it smooth? I have seen a few screws on the internet with the queue-control and tried their adoption.

  My program should work this way: after you complete the settings, I begin the acquisition of data (an analog output and 2-4 analog inputs), but I only want to save the data acquired when I click on a registration button. (Then these data would go for further analysis). While doing the analysis, the acquisition may be suspended. However, when I click on record I would like to have a feature to instantly restart the recording and to ignore the previously recorded data.

  MainProgram vi is the application itself, with some settings made by the event handlers (now only limited to a selection of signal file and the channel settings). Then the data acquisition can be started by clicking on the button start the Acq.

  And these are my issues: first, sometimes the queue starts, sometimes is not (or at least it does not start the data acquisition). And the main point: I put the sampling frequency, but it is acquired at a slower pace of well (my signal has a delay of 4 seconds, but he needs at least 20 seconds before getting close to finishing). And the strangest: sometimes, especially after some time (about 1-2 min) it freezes and does nothing with the acquisition of data (yet labview seems sensitive, just my program blocks somewhere).

  So now only controlled acquisition is in the problem and firstly I don't like on the transmission data for analysis and recording. (Which seems to be the smallest problem).

  What I am doing wrong? Thanks for your help.

  I join all the files.  (MainProgram is the application itself, MY. SIGNAL is the signal I want to exit.) I use a USB-6211. (for physical work, home a simulated).

  Not directly related to your mistakes but (and here I don't mean to take on you, but...   With an alias as yours, I assume that you have some sense of humor)

  

  Really?  an event structure single image with only one case of timeout (value 1mSec) with a Dequeue inside element how do you code would work by simply removing the structure of the event entirely

• Call multiple loops problem?

  I noticed a couple of times: if I copy a VI (in windows Explorer) that contains a timed loop, then try to run it, the timed loop will not run if the other VI (and its timed loop) are running. I thought it was because of a conflict in the allocation of the processor, so I put them for processor cores different, but that has not worked. This time, I just wanted something that worked pretty much so I replaced the loop timed in second VI with a while loop and added a "wait until the next ms Multiple" to be closer to what would make the timed loop. For some reason, I decided to return to the timed loop by selecting "Replace with timed loop" and that is, it works now! I wonder if processor assignment was not really updated when I changed the constant cable at the entrance?

  If I take a guess, it's probably because you have not changed the name of loop. You can access this by double-clicking on the timed loop itself. When you replace it by a certain time in a loop and then replaced again with a timed loop, it will probably change the name. It is a good observation that should be considered by the R & D.

• Adobe RGB 1998 Workspace vs Image with embedded sRGB profile

  I worked through countless published on the Web about various aspects of the profile settings of colors from all different angles. Obviously a difficult topic depending on how much you must understand.  For now, I have a question of several party who I would appreciate any feedback on of those in the know.  I'll try to summarize it briefly - it is simply in the default RGB color space setting in CS6 against opening an image that has a different embedded color profile.

  Question

  (1) is it interesting 'potential' to work in color space Adobe RGB 1998 if I open an image with an embedded sRGB profile and "preserve embedded profile?  I realize that any potential benefit could depend on the range of colors in the image itself - that is, where an image with color dull or limited range could not affected by any color profile or workspace is applicable.

  (2) if my color default RGB in CS6 space is Adobe RGB 1998 and I open an image with an embedded sRGB profile, can I convert to Adobe RGB to take advantage of the widest range when working with the image.

  (3) if I don't need to convert an Adobe RGB sRGB image to enjoy the widest range when changes but must register the image with an sRGB profile for purposes of production (out of print or Web presentation service):

  3.1 should I make a copy of the image final and Convert to sRGB or I can just save as Jpeg and select sRGB for the profile to be integrated?

  3.2 irrespective of how I save the final image with an sRGB profile, I would lose some advantage I might have seen while working in the Adobe RGB workspace?

  I am not questioning if there is a good reason to work in sRGB vs. Adobe RGB (or ProPhoto) or under what circumstances it can matter - just trying to figure out a couple of mechanics I would work in Adobe RGB, but have a lot of things (slide previous scans etc.) than sRGB or some other built-in profile.

  Also not to query the best camera settings as I am completely convinced the only way to go is to capture in RAW if the goal is a flexibility to work with the picture (I'm still shooting Fujifilm Provia 100F in my Nikon F6 but eventually will go with a good FX digital SLR when I can rotate - point being that all of the images that I work with is roughly slides scanned on my Nikon Super) COOLSCAN 5000 ED Scanner).

  I understand that it is a topical subject (sRGB vs RGB etc.) and not trying to stimulate a wide debate on the issues.

  Thanks for any thoughts you may have on this topic.

  Jerry Keenehan

  p.s. Here is a comparison of an image of the test case of 14 CS6 Adobe class-in-a-book.  "Rev00" on the left is the original image to sRGB included with the tutorial; "Rev01' on the right is the picture where I have first of all"affected"the Adobe RGB profile, and then (through ignorance, maybe, converted - profile Adobe RGB). I did that because I noticed that I simply convert RGB perceptual colors remain the same, so that if I have 'assign' RGB profile, I certainly get a slight pop at this image - may not be noticeable in this screenshot, but I can definitely see an improvement that I love watching them side by side on my Apple LED Cinema display 27 ".

  

  That is right. If the file has embedded sRGB, Adobe RGB workspace is unnecessary and irrelevant. He never comes into play.

  You can, however, convert the file in Adobe RGB if you plan to make a big change on that, and you think you might need the extra margin of a larger color space.

  If you assign a profile (for an untagged document), there is not need to convert to the same.

• Several Images with a charger

  I am trying to load and display multiple images with a charger, one after the other. The program displays only the last image to be loaded and added to the stage. What's wrong? Here is my code...

  ---START OF CODE---------------------------------------

  import flash.events.MouseEvent; Required package for mouse events

  btnGenerate.addEventListener (MouseEvent.MOUSE_DOWN, buttonPressed); Button click listener

  chkSeal.addEventListener (MouseEvent.MOUSE_DOWN, chkTriggered); Checkbox click listener

  If the check box is selected, go to 8 or 9 characters max

  function chkTriggered(event:MouseEvent):void

  {

  If (chkSeal.selected is false)

       {

  txtInput.maxChars = 8;

       }

  on the other

       {

  txtInput.maxChars = 9;

       }

  }

  function buttonPressed(event:MouseEvent):void

  {

  var pictureLoader:Loader = new Loader(); Variable image loading

  var plateText:String = txtInput.text; Plaque text string

  var filename:String; File name for each character of associates photo

  var currentX:int = 10; Current position x

  var i: int; Meter to be used in for loop

  plateText = plateText.toUpperCase (); Convert text to uppercase plate

  For each character in the sequence

  for (i = 0; i < txtInput.length; i ++)

       {

  filename = ' / numbers and letters / "+ plateText.charAt (i) +".png "; Generate file name

  pictureLoader.load (new URLRequest (filename)); Load the image

  addChild (pictureLoader); Add image to step

  pictureLoader.x = currentX; Move the image in position

  pictureLoader.y = 366; Position is constant for all images

  currentX = currentX + 52; Increase the current x (image size)

       }

  txtInput.text = "finished!" Display in the text box

  }

  -------------END OF CODE----------------------------

  You seem to have only a single instance of Loader works for you.  A charger can contain only a single charge at a time.  Try to create new Chargers in the loop.

• For loop within a while loop

  I have for loop within a while loop... admission to the for loop N comes from the VI selection... the while loop I a condition essentially statement it stops just after to finish all the iteration in loop...

  Entrance to the N loop is bascially driven by a local variable... that's the problem Iam having:

  When I press the Start button to run the program... regardless of the output of the select VI is gives the N of the for loop, then the loop starts and then ends in place... and when the output of the select statement takes a different value (the N of the loop for) loop not work until I restart the program again... What can I do so that the for loop runs again for another value of N, the RUN program button is enabled.

  1. clean your diagram.  Style guides suggest keep the pattern of a single screen.  With a little effort, I was able to get your DB less than 1600 x 1000 pixels.

  2 then I can see (some) it happens all at once. This thing does nothing?

  3. local variables can lead to race conditions.  Output in Angle position may be a race condition, although is probably not what you wanted to do.  What does the wired local time at the moment present terminal meter? (Ooops! Two controls with the same name - which can be quite confusing as well!)  If you need or want two components of façade having the same text, use the legends.  Make the labels is different so the comic is more readable.

  4. having more than one Dequeue function on the same queue will lead to unpredictable results.  When an item is removed, it is removed from the queue and is not accessible to any other Dequeue function.  In parallel loops, you have no way of guessing which Dequeue will seize any particular element.

  5 use Boolean reverse instead of Select with wired False to true and true cable at the entrance to false entry. Better, just make the case of forgery in the structure of the case within the for loop the real deal. No required reversal.

  6. I was not looking for to determine the logic of the code within the structure of this case. It seems I could have posted a much simpler way to do this several weeks ago.

  7. use multiply from the Digital Palette rather than a node form multiply by 4 or 1.8. Uses less space BD and is much easier to read.

  8. as has been suggested, learn how to work the machine architecture and the State of producer/consumer.  They can make your life much easier.  Do not try to convert immediately to these models.   It's too much bite to at some point.  Learn how they work first.  Make a few simple examples.  Then rewrite this program in this format.  Probably faster than fixing what you have now.

  Lynn

• Rolling/down shifiting image with low level acquisition of VI

  Hello

  I do image with low level VI acquisition acquisition. The series of captured images appear as an image rolling/down shift. Each image is captured moves down again and again. If frame 1 a row of pixels is 0 when the row wherever the 100 frame is captured rank 1 is at line 100, giving the impression of the image slowly moving down.

  I enclose a small program through which I am able to reproduce the problem. The help of a 1426 PCI capture card and an impressive camera (double IPX-2M30H-L).

  Can someone tell me please what is wrong with this program and how I could fix this?

  Thank you

  Sandeep

  
  

• Application crashes with parallel loops

  I developed an application that controls a digital fluorometer using a C++ DLL (provided by the seller) via a USB connection. I created specifically as QMH architecture because long scans on the fluorometer may take a few seconds and I want the user to be able to control the façade while the equipment is running in parallel. For some reason any, when the loop of material control is bound to its analysis, the façade hangs. If I click anywhere in the window, I get the «...» "" Message do not answer ' in the toolbar until the scan is finished. " While this happens, memory and processor remain substantially the same so I do not think he is tied up system resources. In addition, Windows normally responds.

  I think the DLL is called to a level that affects all vi and when the call of the DLL will be made, each process LabVIEW gets put on hold. I'm leaving basic with this assumption? If this is not the case, how could one breach of this situation?

  Yes - your problem is with the loop of wire/root LabVIEW UI. There is a very good article about it here.

  Your call library function node is set to 'Run' in the UI thread which means that it will be executed in the same thread as stock user interface or anything else that requires that the user interface thread. In other words, no other action of the user interface can occur when your C++ DLL function runs - it blocks the thread to continue.

  You need to know if the DLL is thread-safe, and if this is the case, change the method of appeal of the C++ DLL in the call library function node to 'run in any thread '.

  You can make a difference in the color of the COLD LAKE: