card n wireless Broadcom 4322 part no 582564-002

Similar Questions

• Slow WiFi with Broadcom 4322

  After upgrading my laptop HP DV7 with Windows 8, I found my wireless connection was extremely slow. My card is a Broadcom 4322AG. This seems to be the same problem as has been in the forum

  
  Slow WiFi with Broadcom 4322 and Windows 8 CP.

  Following the advice in this forum, I changed to TKIP AES security and everything seems to work properly.

  Thanks a lot for sharing your solution! My problem was that I downloaded at least 1 Mbit/s and transferred approximately 15 Mbps. Then I changed to TKIP, just as you said and now I'm moving 21 Mbps of download and 19 Mbps downloading. All this on a MacBook 5.1 :)

• Satellite Pro 2100: card network wireless not recognized after upgrade

  I have a Satellite Pro 2100 ad I used successfully a PCIMCIA 802. 11b card wifi for two years.

  Studying the manual, I discovered that the notebook is "wifi ready" (it has a wifi switch, a switch wifi of Alt - F8, and a section of the manual).

  I opened a Bay and found out a mini-pci slot. That's why I bought an Intel 2200 BG wireless adapter and I put it inside, which connects the sons of two antennas, located in the Bay. Finally, I was ready to son mask 11 and 13, as suggested in many forums. But when I put the card inside, unknown electrically. It seems that the mini-pci slot must be Electric.toutes impossible. My Bios is not impossible, but it.

  In another Bay close to the mini-pci card, I discovered an empty shell for a chip. Is this an impossible chip?

  Hello

  As far as I know that this unit is about 4 years old and at that time the unit is tested with the wireless network card with the PA3212U-1MPC part number. This map has been tested, is also compatible and can be used.

  I put t know what is going on exactly in your case, but new material should be recognized and the driver must be installed. I put t know what you mean exactly, but can you please explain exactly the situation?

  The card is correctly recognized and installed in the Device Manager?
  You can use FN + F8 key combination to activate the wireless card?

• Error message 1802 on the installation of the Wireless Broadcom Minipci card

  
  
  

• Try to find the network adapter without WIRELESS Broadcom 2 x 2 for X120e

  Do not understand the difference between the 1 x 1 and 2 x 2 802.11n appellations, I ordered my X120e with the default option of 1 x 1. While the speed is OK when I'm close enough to my wireless router, the beach is not as good. (Not nearly as good as the adapter 802.11 g in my T61).

  Now, I know better, so I'm on a mission to buy the Broadcom adapter. According to the hardware maintenance manual, the FRU # is 60Y3251. If you Google this number, there is only a single sale of the part store: sparepartswarehouse.com. Has anyone ordered Lenovo parts of them before?

  I understand from another thread on this forum that the BIOS has a whitelist of approved mini PCI Express card, otherwise, I had just order one part of Dell which has the same Broadcom chip and less expensive.

  I don't think that the card from Dell or HP works, as far as I can tell lenovo approved cards have a lenovo firmware that detects the BIOS at startup. FYI, 60Y3251 is $53.50 IBMmaintenance.

• Adapter wireless Broadcom - able to connect only to google

  Hello

  I am facing a problem with my wireless connection. I am connected to my wireless network, but not able to surf the net. I am not able to go to any Web site other than Google.com or google related websites (like gmail, orkut). Don't open all the other sites (cnn, yahoo, etc). This is a brand new laptop and I also did a system recovery. I also tried to download updated driver available for card "Broadcom 802.11a/b/g wlan.

  Please could you provide a pointer as to what could be the problem?

  the problem is resolved. I read on some forum that Broadcom wireless adapters do not work with WPA wireless networks. So I just change the type of my network wireless for WPE. This has solved the problem and I am able to connect to all websites using my wireless connection.

• Pavilion 17-f145nl hangs on malfuncion wireless broadcom - windows 10

  Good afternoon,

  I "try to resolve the issues on this laptop, as I put it to update to windows 10, associated with:"

  • freezes during use,
  • problems on the judgment or the suspension.

  I tried several suggestions read on the forum and through many relocations of several drivers, updates, or downgrade to previous versions, trying to find a stable combination:

  • Intel IME,
  • Broadcom driver wireless
  • Intel chipset,
  • HP driveguard protection,
  • video driver Intel HD.

  Now, everything is updated to the most recent. The only two things that I was able to solve are:

  • Stop - can save issues, by installing the latest version of the IME from Intel (11.0.0.1181) driver.
  • HP 3d Driveguard, following the indication of all (twice) uninstall before reinstall the latest driver from HP (found on the suggestion Forum). Driveguard was not working since upgrade to Windows 10 without me that realizing it. I was hoping that this latest achievement would have helped when fixing the mess.

  Yesterday, it seemed that affect configuration was stable, and I was able to operate all day with no problems (heavily). But today the mobile hung once again, showing Wireless failure in the tray notification area. Now, I think its clear that the real problem is the only wireless module!

  I don't know what else to try to get the broadcom correctly function. I have followed all of the suggestions, associated emission power, AP, power management settings compatibility settings and so on. Seems to be a problem between the chipset and wifi card, which is not possible to fix. The problem appears without warning, after some time or almost immediately after a reboot. It is random and impossible to identify.

  Reading the Forum, seems that windows 10 reinstall from scratch does not solve issues like this, but it is the last test I can run before you send the laptop HP using hardware (that eventually I'll do before the expiration of the warranty). And I come back to 8.1 windows (which can be a solution, go to factory reset), since last July, I bought the laptop with the assurance that the machine is ready to be upgraded to windows 10.

  I'm looking for a good alternative, before losing the other days without result

  Finally, I went to the complete reinstallation of Windows 10, authoring tool of via media, as suggested.

  After installation, I needed to update the wireless driver in order to make wifi work correctly (much lower than expected sensitivity). Now, after more than a month of extensive use, everything seems work fine, included network cable.

  The only question that remains is connected to power, the saving features with Notepad unable to go to sleep and resume correctly. As before, I demoted the driver Intel IME in the xx 9. a downloaded from the site of the HP service.

  After all, it would have been better to go to the tool of creation of media before, instead of trying to adapt the initial configuration of the upgrade. Through this experience, I did the same thing to other laptops, it is very beneficial.

  Many thanks to HP for help on this forum; I'll stay tuned and wait for the solution of the conflict Intel IME, finally.

  Andrea Silenzi

• problems with a Probook s 4530 and earn 8.1 x 64 and card RALINK Wireless

  Good afternoon

  I have reported a problem with the installation of Win 8.1 Enterprise on a HP Probook 4530 s which has a RALINK RT3592BC8 wireless card installed.  This card has the info printed on it.

  Rev: 01:00

  SPS:630813 - 001

  Release date: 2011/05/21

  Mac ID: 68A3C4BBD32E

  CT: GBRFA00FK0M86K

  SPS: 630813-001

  HP part number: 629887-001

  WCBN607RH-H1

  THE COMIC BOOK ID: 68A3C48947BF

  The laptop had already installed a copy of the company to earn 8 x 64.  the laptop was working fine on this OS, however we migrate to Win 8.1 Enterprise but this laptop would never apply the inplace upgrade.  We were trying to replace the older readers of 5200 RPM in laptops, and I bought an SSD 250 GB EVO 840, and as I was replacing the HARD drive, I also decided to install Win'a 8.1 x 64 business.  The installation went well until installing Windows begins loading the drivers.  Around 60% the error came that there was an error "irq not less or equal to".  I checked the HARD drive in another machine and was able to install a business Win 8.1 x 64 on it, so I wiped the install and tried again.  Failed a second time.

  At this point, I thought that there was a device that Win 8.1 wasn't satisfied and as by chance the wireless card was easy access to the laptop so it was my 1st point of call.  Installation went through after withdrawal of the wireless card and try again the installation of win, fine.  I was also able to install our 2013 Office without problems and the 1st round of updates to victory.  On the 2nd round, I thought I want to reinstall the wireless card, for cranking up the dreaded irq not less or equal to returned to the top and the machine was in a reboot cycle.  During a start/stop cycles, I turned off and removed the wireless card and the machine very well.

  It seems that there may be a problem with the card stock RALINK RT that comes with a HP 4530 wireless.  At this point, I had to remove the card from the laptop, until I can find an alternative.

  I see a lot of messages about the causing problems ralink drivers/device, but I can't seem to find the right driver to use for the x 64 bit 8.1 on a 4530 (map exceed the details) and what the correct procedure is to have this card works correctly for future upgrades of windows?  can someone enlighten me please?

  Thank you

  Mike

  Hi, Mike:

  The only suggestion I can offer is to try the latest version of the driver Ralink W8.1.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_142231_1

  If this does not work, I suggest you only replace the card wireless with one of those enrolled in the service manual has a better chance of working with W8.1, such as an Intel wireless card.

  When I click on the support page for the 4530 s, I see only a limited amount of W8.1 drivers available which normally isn't a good thing about the compatibility of the device 100% with an operating system.

• Pavillion 500-424: card without wireless/Wi-Fi number!

  Hello!
  So I upgrade my PC Windows 10 and then realized that I couldn't connect to the internet. So I downgraded to 8.1, and I couldn't always connect to the internet. I ran Recovery Manager and installed the Realtek WLAN drivers. It is installed, and the system has rebooted and the list of programs and features said it was installed, but I still couldn't connect to the internet. I then tried to install the Broadcom 802.11ac / n Wireless LAN Driver by ( http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-500-400-desktop-pc-series/7161732/model/... ) that this is what it says for my model and the OS, but when trying to install, it extracted the files very well, but when he said "Installation Wizard settled...". ' (or something similar), the loading bar to load and then the loading bar window just closes.

  While they inspected the Device Manager, the wireless card is not at all, just the PCIe controller or something, for ethernet.

  How can I solve this problem? Thank you in advance!

  Yes, I do.

  I wouldn't bother replacing the card.

  Just get an external usb wireless adapter.

  I use it on my HP desktop PC and it works fine.

  In addition, if you have a double router broadband, it will pick up the 5.0 GHz band.

  http://www.Amazon.com/Linksys-dual-band-Wireless-N-adapter-AE3000/DP/B007ZLGXA8/ref=sr_1_1?ie=UTF8&QID=1449624773&SR=8-1&keywords=AE3000+Linksys

• Firmware of the device wireless Broadcom lost in an update of the BIOS

  Hello, I update my BIOS netbook (Aspire One AOD250). Since the original factory version v1.23 for one, lastest v1.29. Everything went very well but the card wireless; It does not work. Operating system tells me: Broadcom BCM94312HMG. Firmware is missing. Light on this matter does not blink and do not respond to the power button (on the case also). It seems that the wireless card has been removed from the computer.

  How can I solve this problem? Does anybody know?, thank you.

  You can try to Flash the BIOS to 1.23 and see if the wireless card "returns".

  It should not be affected by a BIOS update.

  You see the card in the Device Manager?

  Where do you get the message "firmware is missing?

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• No option of LLTD protocol to the adapter wireless Broadcom 4322AG

  My HP laptop comes with a wireless integrated Broadcom 4322AG adapter. I try to activate the network map so that I can share files with my desktop (XP). I tried to activate LLTD in the adapter, but I don't see the Protocol in the Properties window. When I click on "View full map" (from the connection network and sharing the control screen), I get the following message under my device "Windows cannot start mapping on the adapter. Please make sure that the adapter is connected or activated. It's the adapter used to connect to my network. I updated the driver to the latest version of HP, but I still don't see the LLTD protocol.  Appreciate all the help/pointers on this.

  Thank you

  Hi vraja_ak,

  If you do not see the LLTD protocol in the network map in windows vista, you try adding the LLTD protocol in Network Management window.

  (Control Panel must be in Classic view)
  1. Start menu/Control Panel/network and sharing Center.
  2. click on manage network connections.
  3. right click on Local area connection.
  4. Select Properties.
  5. click on Protocol
  6. in the next window, click on Link-Layer Topology Discovery responder, then click install to install it.
  In the same way, do it for Link-Layer Topology Discovery Mapper of e/s Driver

  Now, check if the option both are available in the network card.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Should card pci wireless antenna? -L10 SP

  Hi all

  I just installed a pci wireless card in my L10 Pro Sat. No probems, he found and installed normally, but I wonder if I need antenna? I thought they'd already inside my unit, but I didn't know everything. Please tell me if I need to buy and connect these as well.
  Thank you

  Hello

  Yes. All WiFi ready units have a wireless antenna.
  Near the location for pci wireless card you can find antenna cable (black and white cable with small connector).

• After new wifi card no wireless connection

  Hi, can all-in-one help me on this problem?

  in my tecra M 745 due youcef change a broken wifi card: the new material appears to be installed correctly, but when I return the laptop wireless connection has been configured in windows with a maximum range of 11 MB/s (a ' b') and keepes fall all the time (notmally 54 mb/s)
  When I want to set up using intel proset software, as I did before the repair (worked great), the program was empty, but the software was still in 'software': the helpdesk here said when the material is allright their work is done. they can set up but cost me a 100 euros/hour
  So, what went wrong? I think that the driver is correctly installed but intel proset does not work, why?
  should I update intel proset?
  Thanks in advance
  Dr. Weekx

  Hello Dr.

  If the wireless card is a new and correctly recognized and installed there not any problem at all. If there is a problem with the feature, it can be simply false connection configuration. Please don t be crazy about me, but installation and configuration of the Wi - Fi connection are two separate jobs. If you check the service for other stuff every step must be paid separately.

  As you know, the wireless connection can be configured using parameters of Windows or by a customer (in your case Intel one). If you want to use the software Intel configuration of Windows MUST be disabled.

  It will be nice that you give us a description of the good model laptop. Sorry, but Tecra M 745 is unclear to me. As far as I know, this is the processor identification and this processor is built in many models of different laptops.

  Good bye

• Need a card better wireless Satellite P750

  Following my grief with wireless Intel 6235 in the thread below card I am looking for a replacement card WiFi Bluetooth, which has the best WiFi reception that card Atheros OEM. Suggestions please.

  At soon Simon

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71711&TSTART=0

  Problem is that Toshiba doesn't support these upgrades. Each cell has specific hardware platform with some hardware components. All preinstalled Toshiba specific and utility tools are adapted and tested with him so there are not many possibilities to change hardware except HDD, ODD or RAM.

  If someone can help it's the Toshiba service provider. They have access to the database of Toshiba and can possibly help with these compatibility issues. I put t think a lot of people out there doing such experiments with upgrade of WLAN cards.

  If I m remembering that some people have tried, but later have been faced with various issues such as card not recognized or not able to be activated at all.