card reader problem

I just upgraded my pc from vista to windows 7 I lost all my readers card, I think it's an Alcor micro usb 2.0 card reader someone at - it a link or info on how to reinstall them

Advertisement

Do you have the downloads, I'm sure it helped, has not yet shown in the Device Manager. While looking in the Device Manager, an icon had a? beside him, clicked on this reinstalled driver, pouf card reader still works, Hey really appreciate the help, have summer vacation

Tags: HP Desktops

Similar Questions

  • Qosmio F30 - 141 Memory Stick DUO / card reader problem

    I have a problem with the Memory Stick Duo Adapter/Memory stick PRO DUO card.
    Computer does not recognize volume. Unit Memory Stick appear in the system, but when I click on it in the Solution Explorer, computer say "insert the disk in drive E". I have the original card Memory Stick PRO DUO 2 gb and MS Duo adapter. 30 sec computer try plug this card.

    Computer properly operate with the Memory Stick Pro 1 GB card and Memory Stick M2 card 1 Gb with adapter M2.
    all this work cards in my Photo and on another computer.
    I am trying to connect this card to Sandisk 6 in 1 adapter PCMCIA, but in this case, no one card works.
    This device appear in IDE ATA/ATAPI controllers like '___Memory_Card_Adapter_II', but the driver for this device is not installed (KODe 28).

    Thanks for the wonderful world of the internet for this info:
    F30-141 does not support memory stick pro duo and adapters has not been tested.
    I'm afraid that also use adapters of doesn't help.

    I bought an external card reader. It s a small device and was very cheap and the best is that this external card reader takes in charge most of the maps ;)

  • L50 individual-A-119 card reader problem

    Hi, I have a problem with card reader... When I insert the card micro SD... nothing. I have already installed all the drivers, but I don't know what to do... can you help me, please? :/

    The SD card reader is turned? Check it please entry in Device Manager and make sure that the device is installed and activated correctly.

  • New installation of XP on Y550 - card reader problem

    I pulled the hard drive a Y550 and put in a new drive. Install XP on CD. Went well.

    Tried to update a driver with one of the drivers downloaded from Lenovo.

    "Not enough place to expand on C:" it turns out that XP is recognizing the card reader, assigning "C:" and assign the hard drive "E:" I tried reassigning 'C:' disk hard by following the instructions on the web site of Ms. This has messed up the license key and the system does not start. Check the BIOS to disable the card reader, but didn't see any option to do so.

    I need XP on this system and the hard drive must be "C:" I guess I could implement a system dual boot, installation of XP on the drive to Win 7, but I'd rather not.

    Anyone have any ideas?

    Solved the problem by disabling USB in the BIOS then reinstalling XP. Everything now works even if I had to install the version of Win7 a few things in order to make them work. I can not configure Desktop Navigator (version of Win7, XP version does not) but at least it starts is and that's good enough for now.

  • Dv6-1001xx 4 GB of RAM, Windows 7 - xD card reader problem

    I did a fresh install of Windows 7 Ultimate 64-bit.  Before I did and was able to get everything going, or so I thought, got all the drivers.  Apparently the card reader will not read my Olympus xD 1 GB card.  Pilots are JMicron and even tried to uninstall and install the Vista drivers, no luck.  It can read a SD card ok, so I thought, must be the map, except that my written camera pictures of her very well AND I tried it in a laptop (Vista Home Premium 32-bit) DV2200 and the Ricoh card reader could read in this laptop, without any problem.  I have 2 other cards xD more little ones who do not read in the DV6, but are well within the DV2200.  I have read this map ok until I installed Win 7, when I was with Vista 64 bit.  I did my install of Win 7 by letting it rename my old Windows to Windows.old folder, so I guess this is a new installation and not an upgrade, given that I wasn't using an upgrade disc.  I'm puzzled!  Shows Device Manager driver technology of memory and below, 4 controllers: JMB38X MS Host Controller, JMB38X SD Host Controller, JMB38X SD/MMC Host Controller and JMB38X xD Host Controller.  All show they work properly.  I don't see anything else to understand my problem, but if you need more info, I will not provide it.  Thanks for trying to help me!

    Test your player on other xD Card.

  • Memory card reader problem

    I have a HP Pavilion dv5-2134us running Windows 7, 64 bit.  In the past, worked the small memory card reader to the front.  It does not now.  There must be a switch somewhere in the device manager - not to conclude.  There must be some downloadable HP driver - was not found.

    1. There is absolutely no problem with the camera (s).  Same model, several units.

    2. There is absolutely no problem with the memory chips.  Down them on another laptop HP as well last night.

    3. I checked to see if pins were crooked on the card reader-not.

    What is the solution?

    I need a specific link to windows 7 Home Premium, 64-bit driver for the memory chip card reader.

    I need a specific way to find the on/off switch in the Device Manager.

    If you run the operating systems Windows 95, 98 and old, be aware that Microsoft has changed names, places and so on.  So, tell someone what has worked 5 years ago may not work today.

    Hi @bdcochran01 ,

    Thank you for visiting the Forums HP's Support and welcome. I read on your HP Pavilion dv5-2134us Entertainment Notebookand of problems with a memory card or a player.  Here is a document on the memory card reader troubleshooting.

    Sometimes, Windows 7 will not allow any change in the drivers here is a solution for this.

    First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - started
    Restart the computer after this stage and try to reinstall.

    Here is a link to the software for the Alcor Micro Card Reader, to make sure that it is installed.

    I hope this helps.

    Thank you.

  • USB card reader problem

    I had problem with a USB SD card reader. Can I use the card reader in another PC, but when I use it will be my home PC, it always fails, and try again to load the driver.

    Is it possible that I have delete all the USB setting and rediscover the USB device again?

    Hi, surfer,

    Of course, open the Device Manager and uninstall the device.

    Make sure you have the driver handy to reinstall if it does.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • SD card reader problems

    I got an error message that says: usb device not recognized and my card reader stops working.  not even the little green light comes on when you insert the card (built in reader, multy.)  I reboot but no go.  Suddenly, he started working for a while on its own.  then I get the same message and it no longer works.  What could be the problem.

    rippertoe,
    Well, I think that we have exhausted all the options except to re - install Vista.  If you can not install updates and System Restore does not work, you will have to reinstall Vista.  We tried all repair options.  When he had run the System File Checker, he found the all bad files and if so, it repair?

    This is a help article to guide you through the re - install.  Make sure that you have all the data saved or recorded on CD or DVD.  Let us know if you need assistance with this procedure.
    http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

    Thank you

    Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Media card reader problem

    The green light on my media player is constantly on, because he thinks that there is a card in there. It is causing all sorts of problems with my PC. I did search back issues with media card on the forum readers to find a solution. The closest solution to you, that I could find is below.

    http://h30434.www3.HP.com/PSG/board/message?board.ID=HardwareDPC&message.ID=5888&query.ID=211647#M58...

    I tried to put the card in and out with no luck. I restarted the PC with no luck. I tried to disable and re activate each in Device Manager. The solution to the issue I found suggested that uninstall all the different reading devices and restart. Someone at - it any other suggestions on how I should approach this issue? Any help would be greatly appreciated.

    Thank you

    jahmekyat

    Hello

    Thank you for your response. Sorry for the lack of information in my post. In fact, I have corrected the issue last night. What I did get another sd card and insert that into the card reader. Then, I went through Explorer and clicked on, safely remove and it worked. I think that the problem could be with the previous card is not removed correctly, or that the other card was causing problems for some reason any.

    Thanks again for your help,

    Bryan T

  • DELL Studio XPS 435 t/9000 card reader problem

    I have received my computer desk DELL XPS9000 exactly one month ago. In the first week, the hard drive has failed. If Dell sent a technician has replaced the hard drive.

    Last week, the card reader does not read the SD card. I found that there is a "unknown device" under Bus computer USB controllers, the Device Manager. I was following result after runing DELL self-test - "error initializing Test results: device, 5 d 00 error Code: 0009, Msg: UUTUSBTM - DEVICE_INITIALIZATION_FAILURE user must attach the RH 3 port unit and re-start the test.

    Contacted DELL XPS technical support. The agent could not solve the problem after you install several drivers. He will then plan to send a technician to replace the card reader.

    It seems that I am not alone with this problem. I wonder if there is lack of system design with this nice computer.

    HI2009

    I have received my computer desk DELL XPS9000 exactly one month ago. In the first week, the hard drive has failed. If Dell sent a technician has replaced the hard drive.

    Last week, the card reader does not read the SD card. I found that there is a "unknown device" under Bus computer USB controllers, the Device Manager. I was following result after runing DELL self-test - "error initializing Test results: device, 5 d 00 error Code: 0009, Msg: UUTUSBTM - DEVICE_INITIALIZATION_FAILURE user must attach the RH 3 port unit and re-start the test.

    Contacted DELL XPS technical support. The agent could not solve the problem after you install several drivers. He will then plan to send a technician to replace the card reader.

    It seems that I am not alone with this problem. I wonder if there is lack of system design with this nice computer.

    I've had this problem forever. Problem is that the media player is left in a State of 'strange' because of a BSOD, and I have not found the cause of THE BSOD this.

    My 435 t comes with Vista, and not until I upgraded to W7 I was able to get a handle on this. W7 has reported that the device did not work. Before this Dell replaced the unit and cable. This device appararurent again, only to stay for about 2 weeks. I had it happen once before too, and support me try to remove and reinsert the cables, but I couldn't reach them (support hung up before I could try) and had only tried the device itself, not the motherboard. I called back and said I could not and they sent the parts. Later arrived before the parts I decided to try again by taking unscrew, but I've loosened it and feared the screw would fall into the system and it has tightened. The unit was working again? However, two weeks later he failed. Items sent and installed and it worked.

    2 weeks about go by and it fails. Dell asked me to reinstall Vista and format during the installation. I hesitated and pushed them to do the following. Send a motherboard... and they did it, it was installed and the machine worked. Change the motherboard to solve another problem, 2nd DVD drive opens randomly and narrow when I open the first time, after that, worked OK. That stopped happening.

    After that, I installed W7. Got a BSOD running DVD Flick (there are reports of this failure on Dell because IASTOR, the SATA driver) and the re-start, W7 has reported that a USB device does not work. Well, the media player was gone... open the folder, messed with the wires on the side of the motherboard, case closed, re-boot and it worked again... now I know the "fix."

    It turns out that the fix is REALLY SIMPLE, pull the power cord, wait for the green light to go a little longer, plug the power cord from back in and reboot. Fixed a problem.

    Well, I'd call it a work-around. The real problem is the device USB is not be initialized, either because the BIOS does not power on or the unit was in such a State, it could not be. Removal of power resets the it.

    I hope it works for you.

    IRV S.

  • Card reader problems

    Hi, I have a laptop 700z5a-s05uk of Samsung Chronos. Im having real problems with the card reader. It therefore appears as a mass storage device, when I insert an SD card into the reader, and computing even appears as a disk on the management of the computer (disk management) screen - but I can't access the SD card or its contents because it does not appear in my computer... someone can help?

    Get a little desperate.

    He receives a drive letter in disk management?

    You are able to test the card on another PC?

  • ThinkPad x121e SD card reader problem... Help, please...

    Hello people.

    I have a problem with my thinkpad x121e. There is a SD card reader slot, but it seems that it does not work. I have a SanDisk SDHC card that I use with my digital SLR camera. When I put the card into the slot in the drive on my laptop there is no no reaction or effect that IE nothing happens. The laptop does not read. In my laptop manual it says that it can read the SD, SDHC etc. I correctly place the card into the slot in the drive...

    Anyone know what is the problem and how to solve? Who is a manufacturer fault? I bought the laptop about 2-3 months ago. The slot of the card reader, never used just tried now and found that there is a problem in it.

    Could someone help me?

    Thank you.

    Hello

    Maybe install this card reader driver will solve the problem:

    Name: card reader driver Realtek for Windows 7 (32-bit and 64-bit), Vista (32-bit and 64-bit), XP - ThinkPad

    Version: 6.1.7601.82 out the: December 27, 2011

    Link: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013697

    Kind regards

    Aryeh Goretsky

  • Z370 card reader problems

    I just bought a brand new IdeaPad Z370 last week and use perfectly well except for one thing: the card reader integrated.

    I have already installed all necessary drivers when I first installed the operating system (Windows 7 32-bit), but I can not yet use the reader so far. Whenever I put anything inside it, the system does not detect anything.

    Yes, the driver installation was a success, the cards memory, I tried to put (SD and Micro SD on an adapter) were all work very well and I even uninstalled and reinstalled the drivers with the one I downloaded from this site, but still no luck.

    Can someone help me with this? I would really appreciate. Thank you.

    Hey Ein.

    Uninstall the drivers for the card reader. go to Device Manager, disable the device.

    Restart your device, back to Manager of peripherals and re - activate the card reader. This should then be Win7 install generic drivers for the card reader.

    Once it has been installed, test again and see if it works with generic drivers.

  • SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

    I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

    SD memory card

    Device type: hard drives

    Manufacturer: generic

    Location: SDA Standard compatible SD Host Controller

    Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

    Driver provider: Microsoft

    Driver date: 2006-06-21

    Driver version: 6.1.7601.17514

    Digital signer: Microsoft Windows

    Driver details

    C:\Windows\System32\drivers\partmgr.sys

    C:\Windows\System32\DRIVERS\sffdisk.sys

    C:\Windows\System32\DRIVERS\sffp_sd.sys

    File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

    If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

    If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.

  • On the Portege M800-11J SD card reader problems

    Hi all

    I hope that someone here will be able to help me with a problem. I have a new laptop Portege M800-11J and I try to use a 4 GB SD card in the embedded player. The laptop crashes and allow me to format the card or read. If I use a USB drive, it works without any problem.

    Through Google, I read that there may be problems with some drives and 4 GB cards.

    Anyone else has this problem or offer a solution? I did the driver regular re - installs etc.

    Thank you

    Adam

    What is an SD (FAT16)?

    Or is this a card SDHC (FAT32)?

    The M800 must be compatible with SDHC cards, so maybe it's a driver conflict. Or maybe the pins inside the drive is damaged and cause a short circuit.

    Have you updated the BIOS?

Maybe you are looking for

  • How to superimpose photos in iMovie?

    I don't know how to superimpose an image on a video clip on the iMovie iPad version. I can only overlay video clips. all the answers?

  • Pulls plug wrong Mac Pro?

    I use a Mac Pro 2012 environment; run the Mavericks OS X 10.9.5.  I was running "Disk utility" my Mac Pro is stuck in some sort of loop (I think): 1. the Force Quit option did not work for out me of trouble. 2. I tried pressing the switch "power", bu

  • Any way to change the line of demarcation axis weight?

    I can set the BaselineStrokeThickness and BaselineStroke axis, but is there a way to do the same for the demarcations? Thank you!

  • Replaced the faulty hard drive

    Hello I replaced the defective hard drive on my Presario CQ61 - upgrade to a 500G SATA drive.  Booted up the system repair disc, I created when I bought the computer.  I ask myself a lot of questions about the folder in which to select.  I assumed it

  • Dell Power Edge R410 & Dell Perc H700 modular F2WGY

    Hi guys Need some advice please, a few weeks ago, we bought a Dell R410. This came with a modular 6/ir Perc. However, when we arrived at the installation of drives we noticed that the controller did not recognize disks larger than 2 TB. It's not good