Card technique/pinout on display LM80C219

Similar Questions

• Graphics card for Apple Cinema Display on windows 27 "

  Hi Forum Hardware,

  I just bought a new Apple 27 '' LED Cinema Display to my Windows computer. In South Africa, there seems to be no available adapters and the opinion I have of the internet seems to be that the evolution of my graphics card to one that has a 'mini display port' for the monitor is a better option than to an adapter.

  You kindly me has helped build my windows computer a year ago and my understanding at the time was that the configuration must be balanced. Could you help me to choose a graphic card with a "mini display port" that complement my setup (or improve) and at the same time would have the necessary Mini display for the Apple monitor port. There are a few confusing information on the internet, which implies that the Apple 27 "monitor connection option, which I think might be true in the past, but the latter being only a mini display port.

  , I use my computer mainly for video in Premiere Elements editing as well as stills edit in Photoshop CS5 and Lightroom 4. At some point, I can move to Premiere Pro.

  I used a card nVidia GTX 560Ti with a Dell US2711 graphics 27 "monitor. I repeated the screen problems crashing and recovery. Error message read something like "nVidia has detected a problem and needs to close." Above all, he didn't plant the software, just the screen. I just got the graphics card drivers updated with a clean install and we hope that it can fix the problem that I intend to transfer the GTX 560Ti graphics card in another computer, but I feel worried for the next purchase of the graphics card. Is there any advantage to keep the 560Ti in my computer graphics card, but also the new graphics card with the mini display port? I remember that there is also integrated in my configuration graphics. I was wondering if the two graphics cards could have compatibility problems.

  I read that these very high resolution screens, 2560 x 1440 pixels, gave some people problems slow down their computers. It would be a graphics card problem? I would rather err on the side of more power than less energy I spend a lot of time to video editing. Very frustrating if the computer is slow or crashes.

  My Windows computer:

  CPU: Sandy Bridge i7 - 2600K

  Motherboard: GA-Z68XP-UD4

  RAM: 4 x 4 GB DDR3 - 1600

  PSU: Corsair Pro Gold AX850

  CPU cooler: Cooler Master H212 EVO

  Windows 7

  The supplier declares that he has the following graphics cards which have ports mini display. I asked on nVidia cards, he said he didn't have any in stock. If none of the three below works well, it would be easier for me, but if you have any other suggestions that would be better, I'd rather hunt further for the cards. I live in the country but may order of the city. Or a map of lower end with mini display port, as well as my old card GTX 560Ti would be better?

  In stock at the supplier:

  MSI Twinfrozr OC 3 GB Ram R7950

  ATI Radeon MSI OC 2 GB Ram R7870

  Radion HD 7850

  I would appreciate your help again.

  Kind regards

  Linda Collison

  Linda,

  With your i7 - 2600K, 16 GB of memory and I hope a good Setup, I suggest you:

  • GTX 660 it if you overclock the system to about 4.2 GHz and have at least 4 drives
  • GTX 660 if you overclock a little
  • GTX 650 it boost if you have disks of 3 or less and use the savings for an extra drive
  • GTX 650 it so you do not overclock and have records of 3 or less AND you usually export to the same dimensions as your source material, so there is no scaling.

  If regularly you export to other dimensions of the image, i.e. 1920 x 1080 to DVD and scaling is still present, then go for the next best card, for example instead of a big boost GTX 650 it, look at the GTX 660.

  As Alex said, it makes no sense to spend too much on a single component, when it is supported by other components. That's why these fucking directions.

  I thought a lot about this kind of questions, since they pop up so much and I collect my thoughts on this for some sort of decision table, which allows people to choose the base system they use, the nature of their raw material, the kind of editing they do and exports they need. The problem, however, is to make all of these interdependent factors appear in a simulation of what if that makes sense to people. Don't forget, we're not Professor Eppes in Numb3rs, so (auto-regressive integrated moving average) ARIMA modeling with Cholesky decomposition is not feasible.

• How do the pictures on my card SD will not display like the pictures they show just the water and hills

  When I use to put my SD card in the reader that the photos would show now all I see is water and hills

  Miniatures,

  Open your my pictures location, click on organize in the upper left corner, click folder and search options, click the view tab and uncheck the top option, always display icons and never thumbnails, select apply and save.

  Back to your my pictures location, change the display of the page on the top of the right side next to the question mark symbol, there is another symbol with a drop down symbol, click it and select the medium or large icons options listed.

• The card Module allows to display the locations of the pictures in the library?

  A lot of my photos are geotagged, but only a few (relatively speaking) were keyworded with place names. In LR is it possible to use the card Module to display the locations of the pictures in the library? Which would be quite easy to find all photos taken in a given area.

  I read the help article: https://helpx.adobe.com/lightroom/help/maps-module.html, but, it seems that photos in the film appear in the card Module, not all the photos in the photo library. And I guess you can not add 300 000 + pictures of the film to make them appear in the map display.

  Hello

  Greetings!

  Yes, the photos must be in the card module to mark in the card module.

  To put 300 000 images on film, you put all the images in a collection.

  Concerning
  Jitendra

• Satellite A300 - 1-2 - card WiFi is not displayed in Device Manager

  I have TOSHIBA SATELLITE A300 1 2
  Model number: PSAGGE-00100JRU
  Operating system: Windows XP SP3

  On the server of the laptop, there is a sticker saying he took radio RT8187B device.

  Unfortunately this feature is not in the Device Manager.

  Tried to install different drivers (including the latest Realtek) - no result.
  Tried to add the device manually choose these drivers - no result.

  Switch the trigger switch on the front panel only translates the appearance/disappearance of device Bluetooth in Device Manager but the device wireless in not there.

  FN + F8 does not help also.

  Maybe someone has any ideas?

  All advice would be appreciated.

  Thank you.

  The Realtek RT8187B is the WiFi card in Notepad.

  You should try to update the driver. Search on the WIFI portal for an update:
  http://APS2.toshiba-tro.de/WLAN/

  More updated the BIOS to the latest version. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Did you install the laptop with the Toshiba recovery disc or disc of Microsoft?

• Replacement card mother G580 then display problems

  Hello

  I was wondering if someone can help me navigate through the support of Lenovo. Here is the story backwards:

  My husband bought a laptop G580 on 30/06/13. After less than 2 months, he began cutting use environment and do not take a charge. I called Lenovo support and they have quick send a replacement battery and ac adapter on 28/08/13 after troubleshooting over the phone could not solve the problem. Unfortunately, the computer not yet start or take a load with these new parts, so I had to send it the Lenovo Depot Repair Center to have the motherboard replaced. The computer was received by Lenovo on 10/09/13 and the motherboard has been replaced. Apparently, the computer has been verified quality and all systems were functioning normally. However, when we received the back of the computer screen would not turn. After more troubleshooting over the phone with support from Lenovo, I discovered that the keyboard had not been properly reinstalled and it has been determined that the machine should be returned a 2nd time because something was wrong with the display (maybe the cables don't had not been reconnected properly). The machine has been received by Lenovo on 24/09/13 and 25/09/13 we received a call from Lenovo support saying that the computer has no RAM and cannot be repaired until we sent the RAM. My husband explained that we had not opened the computer since getting this return since the Depot repair center and therefore RAM not must not have been reinstalled after the replacement of the motherboard by Lenovo. We thought at that time here that technicians would be able to install the RAM and repair the computer, since we had not removed the RAM and explained the situation. After not seeing any update on our case on the Web site, I called Lenovo Support on 02/10/13 and told me that the support representative would send another email to the worker explaining the situation. Since there is still no update online, I called Lenovo support this morning and told me that the representative could send a request by e-mail and that I would receive a call later today, when they have more options.

  My question is, what can I do to ensure that the deposit of Lenovo repair center works actively on our case? The motherboard has been replaced and I was told the computer was verified quality, but the keyboard was not put back in place correctly, the display would not work and apparently RAM has not been reinstalled. I'm surprised that this issue has not been resolved already seen that this is the 2nd time it had to be returned and it seems that nobody has worked on the computer from 25/09/13. What can I do?

  Thanks for your suggestions!

  Hi chbadams,

  Just to receive your H.Si sent you additional information about the repair.

  Hope you find the computer fixed soon.

  Concerning

• Windows Update broke the card drivers and graphic display; Impossible to reinstall either.

  On 5 October, I installed two optional Windows updates:

  1 - display - nVidia NVIDIA GeForce 6600GT

  nVidia Display software update released in July 2010

  2 Samsung - display - SyncMaster 2494SW (digital)

  Updated software Samsung screen released in August 2009

  After installation and reboot, my screen resolution is now set to 1280 x 1024 (max resolution) and the monitor is not recognized in front of a default monitor. -http://www.verityhw.com/uploader/files/1/display_settings.png

  I tried to install the latest nVidia on their site (258.96) drivers, and they say that they installed, but on reboot, there is no change.

  I tried to install the drivers for the monitor Samsung 2494SW, but he does not see a device to install the drivers on. -
  http://www.verityhw.com/Uploader/files/1/2494sw_driver.PNG

  I looked in the Device Manager and saw that there was an error with my nVidia 6600GT. -http://www.verityhw.com/uploader/files/1/device_manager.png

  By clicking on properties, I see that the error is Windows has stopped this device because it has reported problems. (Code 43) . -http://www.verityhw.com/uploader/files/1/6600gt_properties.png

  Of course Windows has not completely stopped the device because I still have the graphics, although terrible ones.

  I looked at the drivers installed for the 6600GT and they seem to be the most recent of those (8.17.12.5896).

  At this point, I'm all out of ideas. Everything worked fine before the Windows Update and there is apparently no way to uninstall updates. (I tried to uninstall the drivers of the 6600GT, but it just keeps back to 8.17.12.5896's).

  Any help is appreciated!

  This Forum of WU is for Win Vista, XP & Win 7 if posted same in Win7 forum.

  Perhaps an SR is your next option.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• SD card will not be displayed, when it is connected to the car radio

  SD card works fine until I connect it to my car stereo system... it will only read what's on the internal memory of the player... This is how the player or is there a way to make it visible to my car stereo?

  danimal425 wrote:
  SD card works fine until I connect it to my car stereo system... it will only read what's on the internal memory of the player... This is how the player or is there a way to make it visible to my car stereo?

  You are the GROUND.

  The music library is therefore more a single unit on the Sport Clip.

  The card must be accessible regardless even on the Sport Clip itself.

  The completely artificial limts placed on the block by SanDisk are meaningless.

  It is clear that absolutely no market or focus group research work went into the design of the product.

• BlackBerry Smartphones Music Album Images on 8310 Media Card will be not displayed

  I thought maybe wrongly, that the part of the music of the 8310 would be similar to my mp3 player it would display the cover of the album during playback of the album.  Different albums are on the map and the album art for each image is located in the respective folder.  The file name for each image is simply 'album art.jpg' images were in the respective folders files have been transferred and when the pictures are on the map.  I can see them in the directory, and if I move music, images, all images are displayed.

  Although I'm not technologically challenged, I am frustrated.  I tried everything I could find in the user manual and help screens.

  I'd appreciate any help.

  Thank you

  Connie

  Hi and welcome to the forums!

  Under the current CEO of media, you cannot display the album. There are several applications of part of thrifd that can help you do this. Flipside is a. There is a free trial for this product.

  Here's a link: http://www.electricpocket.com/flipside/

  There are several out there so you can Google search.

  Please let me know if it helps!

  If this answers your question, please set the thread by using the options on the star of the Kudo!

  Thank you!

• Since the upgrade to FF6 some card sites is not displayed

  This site allows to work with all previous versions of FF.

  I suspect that maybe Java associated, because they are automatically disabled in FF6

  You can see the Console Java extensions disabled, but is not effect the Java plugin that is used for Java applets.
  
  Your list of system details more shows the Java plugin, but this plugin is not required on this page.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• pictures disappear, the cards are not displayed

  Some dysfunction in views - appear in fact 2 errors:
  1. on some Web pages, image appears any time but then replaced by the loading symbol, reloading repeat this sequence.
  2. in addition, cards are generally not displayed but remain empty (no loading symbol) right from the beginning.
  I guess it has something to do with settings, modules or plugins, but could not do by disabling their functioning. It is not the site itself, as the pictures show well with the same version of Firefox on another PC.
  Thanks for help.

  I finally solved the problem. It had to do with the profile of the user - after reset everything works fine. Good luck for those who also have this problem!

• (G510) Fn key and display card issues...

  I'm using the computer laptop lenovo G510.

  I am very confused on how to stop the fuction key, for example. pressing F1 instead of Fn + F1

  Cuz he's so annoying on the use of certain programs.

  Moreover, I know that there are 2 cards inside my laptop display, an intel 4600 and the other is AMD 8600 / 8700 M. Can I use graphics card fault instead of the graphics card AMD intel 4600?

  I try system BIOS and Fn + Num Lock key, but the two are not working.

  Thanks for giving advice.

  Hi all

  Thank you for your patience. We have just published a tip regarding the issue you are facing. Please veiw the link below to to respective BIOS

  http://support.Lenovo.com/en_US/diagnose-and-fix/detail.page?docid=HT080427

  For now, I'll put this post as the solution to guide customers accordingly and will continue to follow the case. Please still post here on the results and should not be considered an adequate solution we umark cela and are continuing their investigation.

  Concerning

• Display card/video card does not support DirectX

  First of all, I thank you in advance for any help I receive...

  When running a game program, on occasion, the program is interrupted by a blue screen with a message something very long fault and then my computer shuts down. When I reboot, I get the error message statement, I send and the message...

  To upgrade your

  This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer

  If someone can point me in the right direction, until the card video and/or display adapter that I need, I would appreciate it. I don't run a daily automatic updates... don't know if it's important. Thank you, once again.

  Hello

  ·         What is the exact blue screen error that you are experiencing?

  ·         Game in which you try to read?

  ·         Which version of DirectX is installed on the system?

  Method 1:

  If you do not know the version of DirectX that is installed on the system, then, I suggest you follow the steps mentioned in the article below.

  How to determine the Version of DirectX using the DirectX Diagnostic tool

  http://support.Microsoft.com/kb/157730

  Method 2:

  I suggest to download DirectX on the system from the link below and then install it on the system and check if the problem is resolved.

  End-user Runtime Web install DirectX

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Re: Display the update driver on Satellite L655-1Jn

  I'm waiting for the update of the display driver for my laptop Satellite L655-1Jn.

  Is it possible that the update has been release 8.7? In the ATI site, the latest available driver is 11.10, is there another way to install the new drivers without waiting from Toshiba that I think that it won't happen because the latest version was more than 6 months ago!

  Thanks to tips to help

  Hey slash

  As you probably know display driver support is limited to mobile units and the display driver update will not be offered so often.

  Due to the specific and limited design laptop cooling capacity manufacturers are very carefully with this stuff. New driver can force a graphics card to run with more performance and more performance produces more heat. When the temperature is too high or laptop turns off automatically or it may happen that graphics card will be damaged.

  I checked the download page for some newer models with the same graphics card, but the latest display driver for all models is 8.712.2.1.

• Display problem on Satellite Pro M40

  When I turn on my laptop, the screen stays dark.
  I have hooked up to an external monitor and you can get a signal that allows me to connect. Once logged into windows xp the laptop screen rises suddenly in life.

  Tried using the Fn + F5 on market, but it does not work.
  Do check the BIOS and settings in power windows and can see nothing obvious.
  Put the laptop to dual screen laptop and CRT, but when I reboot, all I get is a signal through the external display (until I log in to windows), then the screen of the laptop begin to operate.
  No changes to the settings or installed any new software for this development.
  Tried to restore Windows to a checkpoint system well before it started, but not joy.

  Any ideas?

  Hello

  Have you changed the display of the external monitor to a default monitor?

  In this case the display of laptops will not work until the OS is responsible.
  Well, please check in the properties of the graphics card if the internal display of laptops is set as a default view!

  If that doesn't help I would recommend checking if it of possible to start Notepad in safe mode and if the books display can be activated.
  If all the settings of this change, then the installation of the new system would be desirable.

  Good luck