Card USB Reader works only with Windows 7 Final

Similar Questions

• Pavilion laptop: SD card reader works only with windows 10

  The SD card reader does not work after installing windows 10. I contacted Microsoft... they fixed other issues but said HP drivers needed to be updated to read SD cards.  Help, please. I am a professional photographer and NEED to use SD cards!

  Hello:

  What is the number of full model of your laptop?

  So most of the new laptops pavilion equipped with a Realtek card reader, try the first driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• ENVY of HP TouchSmart m6-k015dx: SD card reader works only with windows 10

  After you have installed windows 10 the SD card reader will not work.plz help me I am a student and offbeat leactures etc. in my laptop.

  Hello:

  See if you install the driver of W10 card reader should be...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_155234_1

• Hiro H50113 USB modem works only with Windows 7 64 bit

  I bought a HP laptop a few months ago and am running Windows 7.  I bought the modem USB Hiro H50113 and whenever I connect to dial-up internet, I receive the error 678.  I tried to contact the company, but they are of no use.  Please help me.  Thank you.

  Hello

  What is the model of your HP laptop?

  I suggest you follow the steps in the following links.

  
  Get help with "Error 678" message

  http://Windows.Microsoft.com/en-in/Windows-Vista/get-help-with-error-678-message

  Note: Suggestions are applies to Windows 7 as well.
  
  Windows XP SP2 causes error 678 or error 769 when you try to browse the Internet

  http://support.Microsoft.com/kb/892889

  Note: Steps suggested in the link above applies both to Windows 7.

  Uninstall the antivirus WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not uninstall your antivirus software. I suggest you to install as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• Pavilion 500-090 USB driver works only with windows 7

  Hi, I lowered my pavilion 500-090 of Windows 8 for Windows 7 and impossible to find a suitable driver for the USB controller. Does anyone know which driver will work?

  Hello:

  Here is the link for the usb driver you need and you can use all other drivers of the model above for your motherboard as well.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197679 & sw_lang =

• Wireless USB mouse works only with Windows 7

  When I plug the usb antenna, it recognizes and installs successfully the mouse.  I then sync the two but the mouse does not work.  In the device, the mouse Manager is listed under "Human Interface Devices" as an "input USB device..."  I deleted and reinstalled, rebooted my computer and several other things but still cannot make it work...

  Any suggestions?

  Thank you
  SGT Cren

  I guess that your USB ports are in need of a better driver. It is probably in your drivers "chipset".

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• HP cp1700 printer works only with Windows 8

  My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?

  Problem solved with the driver HP CP1700 for Windows 8

  1 module printer via a usb cable to your pc

  2 turn on your printer and let windows to install the printer

  3. go to control panel of configuration, devices and printers, and locate the hp cp1700

  4. right click, properties, hardware, again, then click on to the left of the change settings tab

  5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot

  6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.

  Hope you enjoy this :)))

• Flash CS4 works only with Windows 7 64-bit and Kaspersky Internet Security

  I have a new computer to core i5 Windows 7 64 bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 answers so that it is completely unusable. Uninstall KIS and it works quite well. I already read on another forum that someone of another encounter the same problem with the same combination of products. Does anyone else have this problem amd If Yes, how do you solve? I posted on the forum of Kaspersky without solution so far.

  Norton works OK with Windows 7 (64) and CS4?

  Your chance.  After a week of research I found someone who has thought about it.  Apparently his self-defense of Kaspersky which is causing the problem.  Under options disable control external sevice disable.  For me, that did the trick.  If it does not for you also try to disable self-defense under both options.  Once I did it was moving smooth again.

• SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

  I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

  Hello Chad,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

  Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

  I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

  Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

  Thank you.

• Alcor micro usb 2.0 card reader works only on windows 7

  Hello!!!

  My alcor micro usb 2.0 card suddenly reader has stopped working on my asus laptop yesterday, when I tried to insert my SD memory card that it just shown for a few seconds, and then he disappeared under the "My computer" window, I checked on 'device manager' and there is a yellow triangle with an exclamation point above and under device status , I get this message: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »
  What I've tried so far:
  Uninstall/reinstall the driver (no need to update when he says that it is the most recent driver)
  Tried the microsoft tool to 'Fix' and it just says: "the problem was found, but changes could have been applied properly.
  Remove the battery from the laptop
  Tried to use my drive to SD memory on another computer and it works perfectly
  Here's something odd: I have win 7 and win 8 dualboot customer overview, I started victory 8 Overview client and inserted the SD memory card and it works beautifully.
  It also seems to work just fine when I boot using the 'safe mode' SD card is fully recognised.
  I would be grateful if you can help me please, I don't know what else to do.
  Features of my laptop:
  ASUS UL80Jt
  Windows 7 64-bit Sp1
  Intel core i3 cpu
  4 GB of ram
  Thanks in advance

  If it is recognized in safe mode you should perform a clean boot to try and isolated the program that is causing the problem.

  http://support.Microsoft.com/kb/929135

• Tecra M1 - SD card reader works only with 2GB card

  Tecra M1 1 GB XP Pro SP3 - card reader SD tea, which normally works with a 128Mb SD card, is not pleased to be working with a 2GB card. He is recognized as a disk but cannot be read or formatted. File system reported as RAW in the properties of the drive. Anyone any ideas?

  Thanks - int.

  Have you tried to format the SD with Windows or Toshiba SD card utility of the card?

  In addition, you can download the latest version of the tool from Toshiba here:
  http://EU.computers.Toshiba-Europe.com

  Have you tested the card in another device?

• x 220 card reader works only on Windows 8.1

  Hey,.

  I therefore installed Windows 8 (new install, no upgrades) on the machine and since then the card reader does not work. I downloaded and installed the drivers from the Lenovo Web site and after the failure of Driver Genius, and of ThinkVantage System Update 5.03. Still doesn't work, I install them, but after I reboot it is installed but does not have the card reader (it worked before on Windows 7, the same day, I installed W8). I've updated to 8.1 and the problem persists.

  ATT,
  Lucas

  Yesterday, I did a clean install of Windows 8.1 DVD and did not install anything other than the minimum Lenovo drivers/packages to date (updated system from Lenovo and Lenovo Solution Center). Windows had a notification message that I had to install a driver for the Ricoh media player and its link took me to the download page for Lenovo 2.24.18.01 - what X 230 X 220 and I saw the 2.25.18.01 version too so that, on the contrary (if I was going to risk using the X 230 that I might as well use later). Anyway, I was watching the CPU with a lot of attention and it works fine.

  Note in the case where it is relevant - when I installed the driver, I didn't have an inserted SD card.

• USB 2.0 Slim Portable optical drive works only with Windows 8

  Hello

  I recently bought an external optical drive (USB slim portable optical drive;) DVD + RW/BLU-RAY disc). When I plugged in my lenovo with windows 8. the computer does not even recognize any device connected to it. The optical drive does even turn on. I don't know if it's a problem with the player or what he is.
  I would apreciate for this assistance.

  Hello

  It is possible that the drive is faulty, but there may be a setting of conservation of power on your laptop, originally a problem as well...

  If you go to Power Options... 'Change Plan settings' on the right in blue text... then 'Change advanced power' also in the blue text, you will get a window where you can change the default power settings.

  You can temporarily disable or modify everything related to your USB...

  You can also go to Device Manager... 'Bus USB controllers' and see if you can determine what Hub or your disk controller is attached to and temporarily disable power save...

  Maybe it's that your computer does simply not provide enough power to the drive...

  Can you pass the cables to different ports to see if that helps?

  USB 3.0 ports supply more power, is that you have a...

  You have all the gadgets AC adapter that power via a USB connector, you can try?

  You could try a friends computer or something for a simple test...

  When USB powered external drives first came out, there were many problems with insufficient availability. Even after the use of two Sockets USB problem remained to a lesser extent...

  USB 3.0 has a higher power to try to resolve many of these issues.