Card video PCI-e, being not recognized by system
You are the very welcome.
I agree with vynga that you should get integrated VGA video and digital display port.
The advantage of the display port would be the Vice of analog digital video output, which is what you get on the VGA port.
Display port is good for video display HD, if that matters to you.
Me, I would get the video from HD 6450 card and have 3 options... VGA. HDMI and DVI out and a boost in graphics to start performance. Free up system memory that would to the integrated graphics card.
You should be able to run two monitors of VGA and DVI ports.
Tags: HP Desktops
Lenovo x 220
Winodws 7 64-bit, up to this day
MyDigitalSSD Super Cache2 50mm SATA III (6 G) mSATA SSD
I installed my mSATA card by following the instructions and the party went well. As a couple of other people the player is not recognized by Windows 7. I checked storage management in windows 7 and the drive is not there in any form. I disabled all the caches as suggest some positions in the policies for the drive in windows 7. Once again no drive recognized.
Any help you could provide would be really appreciated.
There are a few discussions about this on this map and a knowledge base article for you to check.
Let us know what you find!
I searched for help and found similar problems have yet to see any real solution. Seems that many face the same problem with key USB cannot be recognized on Windows 7
Is there any solution yet? I'm not computer whizzkid so if there is a REAL difficulty (not something dubious Regedit that sounded like he screwed up computers everybodys!) please let me know how to do - it is so frustrating!
See you soon
Have you checked the player on other computers running Windows 7, Vista or XP?
Be sure to check forums and with Support of the manufacturer of the Drive, their documentation online.
It is SanDisk however, these methods can help with other brands of USB keys.
Cruzer not recognized by the PC
Check with manufacturer's support the system, their drivers and documentation online and ask for their
Forums (if any) for known issues. Search for updates of BIOS, chipset of low-level drivers and others
USB drivers on the site of the manufacturer of the system (motherboard for systems custom built manufacturer).
If a PC remove ALL power and reinstallation of the cards, memory and cables (at both ends where possible)
-in fact, remove and replace - do not just tight. Remove the dust bunnies and make sure that the ventilation openings
are clear. For a laptop on everything that can be done is to reinstall the memory and clear the vents.
If nothing works and it's a PC, you can disable the onboard USB and use a USB add-in card
is not expensive. Of course for a PC or laptop using a real computer store (one who does in)
Home service) or system manufacturer support can be requested.
Other troubleshooting methods:
1 reboot to be sure nothing blocks the ports.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
How to fix the system files of Windows 7 with the System File Checker
Then run checkdisk (chkdsk).
How to run check disk in Windows 7
Then lets refresh the USB stack
Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices
Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
for all instances
Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB
This KB shows XP how to and the method of Vista is identical
This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer.
as well as all USB devices that you previously used. Run Options and tick the three 1st choice
to see if one is there. Try to remove all instances and restart then plug the drive.
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
Hardware devices not detected or not working - Mr. Fixit
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
PP CS6 Mercury Playback engine supports the Nvidia GTX 660 Ti card. I just installed the card and it is not recognized in a new project.
I have not reinstalled the software again, this part of the installation option.
Any help or suggestion?
In Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS6
Notepad as administrator, open cuda_supported_cards.txt
Add a line with "GeForce GTX 660 Ti" without the quotes, save the file and restart PR you can now enable CUDA acceleration in the project settings.
Repeat this to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files
and the raytracer_supported_cards.txt file
I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.
I also bought a new Pioneer DVD-RAM and it comes up with the same error code.
Can someone help me please?
To start the registry editor
Click Start, run, type regedit, and then click OK. Start the registry editor.
Then follows the steps described above.
I have a problem with my DVD drive in my dimension 8400 (about 3 years)
I can open the DVD player and insert DVD/CD but they are not recognized,
My computer is not present DVD player, there is no CD/DVD players present also in the management of devices.
I think the DVD player I have is the Philips DVD 8601 HH 16 x DVD + RW,
I had a similar problem about 1 year ago, but that has been fixed by updating the firmware/drivers. (although the DVD player doesn't "disappear" from my computer, it comes to refuse to play the disc at the time)
Im not a computer newbie, so I tried several things to try to make it work:
http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_cdrom&message.ID=138730&query.ID=270189#M138730 I did steps 1-3 and 5, and nothing has worked.
Someone at - recommended step 4 too? Question about step 4: you have to clear the CMOS chip memory AND reset the default settings of the BIOS Setup? It was not clear from the guide on this forum.
I tried to download the updates of the Firmware, but when I tried to update it says "Device not found", logic, because the device is not - where on my computer.
That's my problem.
Thank you very much if anyone can help me
Perhaps the DVD player is just broken and I need to get a new one, but the fact that I can open and close the lid and the light Burns gives me hope that its stil alive: P
I have a small sony vaio netbook running windows 7 starter edition. I did a system restore recently - saved on an external hard drive usb, nine 1 to seagate backup more - now after fighting with 124 updates hard disk is not recognized. Seagate has say the drivers are pre installed in windows. convenience stores never work - I find the trouble shooters are almost always useless - is this just me?
It works on my laptop of friends - so im guessing it is the operating system reinstalled - what I do?
First of all, we apologize for the late response.
- What happens, do not install the updates?
- What is the complete error message you get, when the update installs?
- What is the update kb article number?
for problems with windows updates, run the tool in troubleshooting Windows Update:Open the Windows Update troubleshooting toolFor the problem with the external hard driveCode 28 shows, the drivers for this device are not installed.Error codes in the Device Manager in WindowsLog in as administrator and then try to install the driversHow can I connect as an administrator?
S eaTools for WindowsAdditional information:"Access denied" or other errors in the access to or work with files and folders in WindowsI hope this helps. Please get back with the results.
Original title: recognition of Harware problem
I tried to install a PCI TV tuner in WIn 7, but the computer does not recognize it. I tried it on another computer running Win 7 and it is recognized it. Any ideas?
1. no TV tuner appears in the Manager of devices under sound, video controllers?
2. is your updated TV tuner card?
Step 1: Look for errors in Device Manager
a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
(b) in Device Manager, look for the device and then double-click the device name.
(c) under the general tab, find the status of the device for any error code indicated.
Check out the link:
Get help with (valid also for Windows 7) Device Manager errors
You can visit the following links and check if it helps:
Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".
Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".
You can also check out the following link and try the suggestions provided by cheque and eRwIn jOnEs Tuesday, February 23, 2010 05:11 if it helps:
Hope this information is useful.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
I hope I found the right place to ask this question.
Im trying to configure with network cards K1 on esx vGPU 6 and windows 2008 R2.
I managed to get the GPU passthrough works fine but I want to continue vGPU (last n more)
That's what I've done so far.
Installed esx6 on Cisco UCS C240 M4 (CPU value high performance max flow and mem)
installed the last grid VIB Manager
i.e. esxcli vib software install - no.-GIS-check-v /vmfs/volumes/ISO/vib/NVIDIA-vgx-VMware-346.27-1OEM.600.0.0.2159203.x86_64.vib Result of the installation: Message: operation completed successfully.
NVIDIA-smi reports 8 x 4gig GPU
Using the vmware webclient service, I create a virtual machine and assign it a profile of vGPU (180 in this case). He tells me that I have reached the maximum number of devices of this type (google was not helpful about this message).
In the vSPhere console, I see a PCI Device 0 added to the new virtual machine, it is said he has not supported with a note saying "this virtual device type is supported but support it is not supported on the current host... »
When I install windows on this virtual machine, I get a yellow! on the standard VGA graphics card with error device cannot start Code 10. Any attempt to install NVidia drivers cannot complain that it cannot detect the graphics hardware.
The thing is, I'm sure I got this work before, but now it feels like Ive hit some limits as suggested by the message "maximum number of devices.
I tested using vmware 5.5 and 6.0 tools
Any suggestions aside from just rebuild again?
Hmm, it seems that the comment on the unsupported PCI device may be an effect to use instead of the web client vSphere client. I created a new virtual from Windows 7 machine and used the provided in the package VIB of nvidia driver and it worked. In the console PCI device said still not taken in charge. I will try to update the driver in our w2k8 server now.
Update: Yes, it seems that I used the wrong driver package. It seems that I can have tried to use another driver which I suppose was for use with vSGA or pass through.
nothing to see here, move along
I have a little problem with my tecra 9100. When I want to use my wireless network, it works sometimes and sometimes the pc does not even see the map. but when it works for awhile, then the complete system crashes! and I have to reset the tecra. now I use an external wireless (3com) and features a large, but what can be the problem?
Without accurate control for laptop, we can just speculate what may be the problem. If sometimes the WLAN card is not visible to the system, I guess there is a contact problem and system has no contact to the card and card cannot be detected at all.
When it blocks for laptop may be due to loss of contact on the map. In my view the contact on the motherboard must be verified by the service. If you don't want to just use the external solution and take advantage of the WLAN functionality.
Recently, I bought a Logitech H530 headset after the microphone on my old broken, I've had for about 1 year.
When I got home, I plugged into the same USB port as the old man and waited to make it. Shortly after in him plugging, I got yellow bubble message saying that the "peripheral USB could not be recognized. So I took it, put it back it and the same thing, I tried the rest of my USB ports, but I got the same message on each of them.
I got out of my PC and tried in another message even once again, so I have it plugged into a laptop and the same thing.
I intend to return for a new Wednesday because I think that it is faulty because my old one worked fine (with the exception of the physically broken microphone)
But everything that you guys can suggest I'm willing to try
Have you installed the drivers for it?
When re-sort, further to the top of the script object, they work as expected. The line on which it no longer recognizes functions also is not always the same and I worked with some script objects with more than 800 lines with all functions still work.
I tested Designer 9 and 10, Reader 8 9 and 10.
At least let me know that I'm not the only one. I knew another developer who had encountered the same problem.
I've never had a problem with big scripts, even with 1000 or more lines.
Did you test your scripts JSLint?
Dirty syntax can always have side effects.
I had this problem last year and I was able to remedy this by copying the contents of the folder system32/macromedia/flash on firefox/plugins folder. This solution does not work for now. It appears to come to install the latest version of the player.
I have tried absolutely all of the suggestions made for each similar survey posted. I've uninstalled and reinstalled Flash and Firefox so many times that I lost count. It goes the same for Firefox reset. Simply Firefox won't recognize the plugin. I, of course, checked the Firefox utilities for the identification of the plugins installed.
I desperately need a fresh solution. Does anyone else have this problem?
If Firefox does not have the Flash plugin in its installed location of the probably missing registry key that Firefox uses to analyze for the Flash plugin.
You can copy the files of the plugin in the browser\plugins folder or in a folder plugins in the current Firefox profile folder or the Mozilla\plugins parent.
The plugins folder in the Firefox program folder is no longer used.
I have a new computer, webcam stopped working, I reinstalled the software screen indicates it has been reinstalled ok but when I try to use the camera it says on screen no device connected to the usb. help please.
1. what operating system is installed on your new computer"? XP, Vista or Windows 7?
2 do you see anything unusual (yellow bang) in Device Manager?
Assuming you are using XP (because the thread is in the XP category), I suggest you follow the steps below.
Step 1: Use Device Manager to find the hardware changes
Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.
To check the hardware changes, follow these steps:
a. Click Start and then click Run.
Note If you are running Windows Vista, click Start and then use the search box.
b. type devmgmt.msc, and then click OK. Device Manager opens.
(c) in Device Manager, click on your computer so that it appears highlighted.
d. click Action and then click Scan for hardware changes.
e. check the USB device to see if it works.
Step 2: Remove and reinstall all USB controllers
To remove and reinstall all USB controllers, follow these steps:
a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
b. click on the Hardware tab.
c. click the Device Manager button.
d. expand Bus USB controllers.
e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
f. restart the computer and reinstall the USB controllers.
g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.
I was wondering if someone could help I have tried everything to fix the error 552 on my curve 8520 but nothing works, and now the phone will not connect to my laptop, I tried apploader now it says device current is updated, office says unable to connect to the device (from the outset) software and the phone does nothing except sitting on a white screen with "software reloading 552" written on it.
Could someone please help?
Welcome to the Forums of the BlackBerry Support
As your device does not detect that you can try the Application loader to force detection of your device to load the operating system, please see the Knowledge Base Article:
KB10144 : How to force detect the BlackBerry smartphone using the Application Loader
But remember, in this process, you will lose all data in your device, I hope you have your backup.
Further information: KB18751 : error "Reload Software: 552" appears on the smart phone BlackBerry.
Maybe you are looking for
I bought the TV today with a wireless adapter. I connected on my home network before pressing the button "portal." The screen went black and it says "Loading, please wait", he has been like this for more than 30 minutes. I tried to turn it off an on
Hello I'm the Manager search for wwan M505-S4945 for a Linux software. Because my modem is not detected in ubuntu. If you app for Linux... I really need... Thank you
The sensme music playlist went after update to 6.0 Marshmallow. Does anyone know how to fix this?
How do Alt + 2 OR shift + 2 functional in Android EditField component which Alt + 0-9 & SHIFT + 0 to 9 are respectively seized from 0 to 9. Only Alt + 2 & shift + 2 aren't seizes 2 in the EditField on all physical BlackBerry QWERTY devices such as th
Setup for Win 7 Prof error can not activate. I did a clean install of Windows 7 teacher instead of an upgrade because of idiocy. Now it does not accept my product key. Is it possible to set which does not imply a costly phonecall?