Card wireless for Compaq 8000 Elite CMT PC

Similar Questions

• HP Compaq 8000 Elite power supply upgarde

  I have a HP Compaq 8000 Elite 2010 and you must update the power to launch my new Radeon HD 6850 graphics card. After much research I found that this particular computer motherboard does not have a normal diet of 20 or 24 pins but use instead of 2 separate connections from 4 pins for power supply PWR and PWRCPU and a third cable that seems to me to be an ancient and obsolete 6-pin auxiliary power (http://www.playtool.com/pages/psuconnectors/connectors.html#aux) for the PWRCMD supply Cable. I also found that all power is carried out through the motherboard for each piece of hardware in the computer and therefor, most likely has a limit for the maximum possible power supply. Y at - it sort of a power supply that will fit both into the slot in the power supply (which is not the standard size of power supply, but rather measures approximately 6 "x 5.75" x 3.75") and will also be able to connect to and sufficient power to the motherboard? Or am I stuck with an ugly 320W? Help, please!

  Service card: (http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01944841/c01944841.pdf)

  Similar cases: (http://h30434.www3.hp.com/t5/Desktop-Hardware/replacing-PSU-on-HP-COMPAQ-8000-ELITE-Convertible-Mini... )

  Maverickv2,

  You will not be able to upgrade this power supply, model # 508154-001. It is not possible with these connectors. The most absurd part is that the material (disks) are actually powered off the coast of the motherboard. (As you said).

• HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  PainedByTech wrote:
  

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

  For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?

• blue screen on PC minitour Convertible HP Compaq 8000 Elite

  It is a new computer purchased from OfficeMax and just put in service on January 4, 2014.  I get monitor outages, with the error code display driver stopped responding and has.  It's a nuisance, but all of a sudden I'm getting a blue screen crash as well.  Everything I could rescue this accident most recent was

  "Signing of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  "More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8005F124E0
  BCP2: FFFFF88004035CB0
  BCP3: 0000000000000000
  BCP4: 000000000000000C
  OS version: 6_1_7601
  Service Pack: 1_0
  "Product: 256_1.

  I scanned with everything I know how and much more.  Now I'm starting to wonder if I can trust my data on this computer.  Any help is greatly appreciated.

  You are the very welcome.

  You need not purchase contracts.

  It's to put server to update firmware only.

  I don't know why this driver was not installed.

  However, this would have been the last being for your model.

  If you want to take a little more money on the PC, I would just buy a cheap video card and that should take care of your dilemma.

  I have an 8000 Elite CMT as well running W7 Pro x 64.

  I installed a graphics card, and it works fine for me.

  If you want to go this route, let me know and I'll give you a link to a good cheap video card that should work perfectly for your PC.

• Compaq 8000 Elite COnvertible: compaq 8000 elite minitour convertible pci driver windows 7

  Hello, I had trouble finding the right drivers for my port of compaq 8000 elite series minitour convertible pci and pci simple communication controller, running windows 7 ultimate 64-bit...

  I found a link in a different thread, but the link does not work...

  Could someone help me please? It would be greatly appreciated☻

  Kind regards

  David

  Hello:

  You need these drivers for devices...

  Simple Comms:

  This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45411.exe

  Serial port:

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45367.exe

• HP 8000 Elite 8400 core2dou: PC HP Compaq 8000 Elite CPU cooling

  I bought these as refurbished and it works fine.

  Recently, I noticed that there is no CPU fan, or even support for a cpu fan.

  I watch other such online and noticed the same thing.

  This CPU is no need of a cooler?

  Hello:

  If you have the model of the SFF, the CPU is cooled by the chassis fan.

  Air of the fan through the heat sink and provides cooling for the processor.

  I don't remember if the fan blows air into the radiator or it away (it exhausts) taps into the heat sink.

  Just hold your hand close to the exit of the fan to feel which way the breath air.

  There should be a plastic fairing (fan baffle) on the fan and the heat sink.

  You can see the list of parts below...

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=4065894 & docLocale = en_US & docid = emr_na-c01944842

  The 8000 Elite CMT has a processor fan separated at the top of the heat sink.

• PC HP Compaq 8200 Elite CMT: Replacement of the SSD HARD drive and Recovery Options

  I have a PC HP Compaq 8200 Elite CMT I went recently to drive HARD original for one SSD of 850 Evo from Samsung using Samsungs cloning/copying software. Everything went well and the PC is in use today. I do not see the partition D: Recovery on this machine more well, so I think this has not copied or was lost. I still have the disk that was replaced.

  I was wondering if there is a way to replace HARD drive like this with an SSD and everything by keeping the system recovery feature that was on the HARD disk, and if a set of system recovery disks of before installing SSD would continue to operate, or if I need to create new ones, and if I CAN create new ones.

  rgoodrich

  I did what you want to do (for example, to replace a disk with a DDI) and was able to retain the function of HP recovery - but it's because of two important facts.

  First of all, I used a DDI with the same capacity as the original HARD disk.  This is important because if you use a smaller SDS, the HP recovery feature will no more work as a reset begins with reformatting the drive and recreate the original scores - which will fail if the disc is too small.

  Second, I use Macrium Reflect product to 'clone' the HDD to the DDI, which means, he made an exact copy of the partitions on disk on the SDS.  So, when I swapped drives, the PC restarted without any problem.

  People have posted here on the use of the software from Samsung, and they seem to have problems restarting after use and (apparently) with successful copy from disk HARD original in the new SDS.

• HP Compaq 8100 Elite CMT: Need power supply 400w replacement.

  I ordered a refurbished HP Compaq 8100 Elite CMT Quad Core i7-860 2.80 GHz 8 GB RAM 1 TB HARD drive

  And I ordered a gtx geforce 650 need a 400w power supply. I don't know on what power I need command that will fit in this. Can someone help me?

  Use an adapter for your 2nd diet, it's what has worked for me.

  http://www.eBay.com/ITM/like/111284841995?lpid=82
  5.00 after all my research I've found the answer, it's not pretty, but it works.

  Plug one of your SATA power to branch (from your current diet) on the cable resulting, plug your new power supply ATX ATX plug adapter and you're good to go. When your old power supply switch on the adapter will turn on your new, it's great.

  Add2PSU is an adapter popular http://www.add2psu.com/

  You could buy a dedicated power supply if you can find one, but I recommend not, they are expensive, make a lot of noise and heat.

  It was a nightmare for me and I don't want other people to have to go through what I did.

• Memory upgrade - HP Compaq 8000 Elite minitour convertible

  I am looking to buy 8 G memory.  I would like to find a memory compatible list.

  This version of the 8000 Elite CMT has an Intel Core 2 Duo E8400 @ 3 .00GHz CPU.

  I am running Windows 7 Home Premium 64-bit.

  I have 2 of these computers each with 4 GB of ram.  I intend to put everything in a single computer for a total of 8 G and buy 8 G for the other.  What research I've done, it seems that I can buy 240 pins, non - ECC unbuffered 1066, 1333 or 1600 memory speed.  I am aware of the memory would go to the reduction of the speed of 533 x 2 = 1066 speed.  I'm hoping to buy memory from a vendor discount.

  Thank you for reading my posts.  I put on a post on the G. Skill tech forum and one of their moderators suggested that I try the following modules.

  http://www.Newegg.com/product/produc...-424-_-product

  It's basically the same point, just a few dollars cheaper.

• HP Compaq 8000 Elite SFF - virtualization

  There are chances that this PC may run on Windows 8 Enterprise Hyper-V VM?

  I would like to have virtualization on this PC so that I can install different operating systems for the development of trial software.

  I know that the CPU is capable of virtualization, but when I try to install the Hyper-V feature, I get an error that the BIOS is not capable of Hyper-V.

  Will there be an update of the BIOS for this PC to allow me to run Hyper-V? If there is, where can I download it from?

  TIA

  Product # LN071PC #ABG

  Unfortunate, the BIOS has no options to turn on virtualization technology.

  You might consider, if you accept the risk, to take a look at the BIOS change sites.

  Search to see if this has been the topic of discussion on the internet by doing an online search in Google or Bing with "HP Compaq 8000 Elite SFF virtualization" as keywords.

• PC HP Compaq 8000 Elite: Hard drive of PC HP Compaq 8000 Elite

  I want to spend the hard drive in my 8000 Elite.  It seems that all are 6 GB/s (SATA 3) these days.  Seagate said I'm looking at that will work if my computer is not 6 G/s if the controller supports the SATA speed autonegotiation.

  question 1: what is the speed of the controller, I spent the last two hours looking unsuccessfully.

  2nd question: is this the controllers SATA speed autonegotiation support?

  Thank you!

  Vince.

  Hello:

  I'm running a Sandisk 240 GB SATA III (6.0 GB/S) SSD in my 8000 Elite CMT and it works fine.

  I used to have a 1 TB SATA III hard disk in it.  It worked very well also.

  It will only work in the SATA II (3.0 GB/S) of speed, because it is so fast that the Intel 4 series chipset will run to.

  The first 8xxx Elite business desktop PC that could run at a hard drive SATA III 6.0 GB/S pace, is the Elite 8200 series with the Intel 6 Series chipsets.

  Do not exceed a HDD 2 TB in your PC if you intend to use it as a boot drive.  The BIOS does not support the readers from over 2 TB to be used as boot disks.

• HP 8000 elite cmt: another issue of elite cmt hp 8000

  OK so I have cmt hp elite 8000 with 4 GB of ram and 2 HDD 1 is a 250 GB, the other is 750 GB for a total approximate got 1 TB a decent graphics card that I can't install to my dvi - I dual to VGA appears but my problem is I have a Bluetooth headset and the pc does not have Bluetooth so what pcie card can use to get the Bluetooth on my pc

  Hello:

  The best thing to do is to buy an external usb bluetooth adapter.

  I use it on my HP 8200 Elite CMT.  Works very well.

  http://www.Amazon.com/Kinivo-BTD-400-Bluetooth-4-0-USB/DP/B007Q45EF4

• Power supply for HP 8000 elite

  Help, please

  Hi, I have HP 8000 elite, the problem is the power supply on my PC is damaged due to a power surge problem, I fixed it. But it does not work very well. Now I turn the power button that is not starts it becomes red power light and 4 times gives a beep both cpu and power fans are not turning on. Now, I want to buy a new PSU, but then I came to know that my PC has a rare type of food that is not normally available on the market, other feeds standerd does not work on this forum.

  In the end I think that there as no break for my solution that one question must take a half litre petrol put on the system and put it on the fire.

  I did not understand is why HP does not follow rules standerd.
  All the help that I can use the PSU others made by Corsair or Cooler Master or I have to wait until the power supply would be available on the market.

  Hi mrafiq,

  Welcome to the HP Forums!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271

  I hope this helps!

  Concerning

• 8000 elite ultra slim: greater for HP 8000 elite Ultra Slim SATA drive

  I have a HP 8000 Elite Ultra Slim 10 Windows running.  What size SATA HDD I can go to?

  (1 TB, 500 GB, less?)

  Hello:

  Using the drive as boot drive, 2 TB is the maximum for the Elite 8000 series lacks a UEFI BIOS.

  I'm not casual if the USDT allows for additional HDD to be used for storage only.

• HP Compaq 8100 Elite CMT: Updated memory 8100 Elite CMT with 2x4gb TwinMos 512 x 8

  Hello. I'm new here.

  Of after the plug technical QuickSpecs, I recently bought 2 x 4 GB of "TwinMos PC3 10600 4 GB DDR3 1333 Mhz CL9 U-DIMM ' memory. The chip configuration is 512 x 8 single sided. When I put the memory inside, my PC will boot only until the Windows logo and keeps on rebooting. I tried the two modules together and separately, black fill slot DIMM1 still. But the problem persists.

  After much research on the internet, I found the idea that it could be due to the configuration of the chip 512 x 8.

  Is there such a question? How can I solve this problem. I plan to uprade max 16 GB, and it's the only 4 GB DDR3 1333 MHz available here.

  Thank you for your time.

  Hello:

  It's the memory that I used on my 8000 Elite that uses the same specification of memory...

  This memory has 8 small black chips on each side of the chessboard (16 in total).

  http://www.Newegg.com/product/product.aspx?item=N82E16820231422

  I would say that the memory you bought is too high a density for the PC to manage.

  The memory I bought works fine in my box.