Cards SDHC + Vista
How can I update driver for accepting cards SDHC with Vista sp2
See the following article:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
If that wouldn't work, download the driver from the manufacturer of your computer "s support site and follow the procedures on the following link:"
How to upgrade Windows Vista drivers
http://pcsupport.about.com/od/fixtheproblem/HT/updatedrvvista.htm
Tags: Windows
Similar Questions
-
Card SDHC 4 GB not recognized Vista
I have a Sony laptop, AR (2008) on Vista and also a netbook series Sony P (2009) that runs Windows 7, cannot recognize the SDHC 4 GB of my camera card. They ask me to "insert a disc. Please someone know if there is an update or some other difficulty to do this?
Hi MegsLittle,
If you use a built-in Media Player, there may be a possibility that maybe the SDHC card is not compatible with the card. I suggest you transfer files from the camera via a USB cable.
However, try the following.
Method 1: Run this utility of automated troubleshooting and see if it helps.
Hardware devices do not work or are not detected in Windows
Method 2: Log on to the Sony Web site and update the latest drivers for chipset as well as other updates to the device driver.
For more help, you can contact Sony.
-
Satellite A305 - access a card SDHC on XP
Hello
I recently bought an A305D-S6851 with Vista and downgraded to XP.
Everything works great and it's great, but recently, I wanted to use the slot for memory card and load my 4 GB SDHC memory card, but I put it and nothing happens.
I have the drivers for the slot installed correctly, and after searching the forums, I discovered that I need a XP - KB934428 fix. I installed it and it does not solve the problem, and then I saw another post saying KB923293 that sorted. Once again, installed and nothing.So I'm in a bit of a dead end here. Drivers? Check. Patches? Check.
In fact, I doubt that it's a problem of laptop because I go through the same process of problem solving on a desktop computer with a USB card reader and it can also read the card.
However, this isn't the card because until I moved to XP on the laptop I managed to access it with the slot with any problem.Thanks in advance!
Hello Len
Have you tested with 1 or 2 GB card? Is the result the same?
What is with the other compatible cards? Have you tested some of them? -
Satellite A200 - 23K - card SDHC not recognized on Windows 7
Hello, I have a toshiba satellite A200 - 23K.
I just installed Windows 7, all drivers support drivers toshiba and all the updates of microsoft windows, including the suport of 32 GB SD flash cards memory.
http://EU.computers.Toshiba-Europe.comBut in the Device Manager there is a witch of the element named "mass storage controller" has not been installed (which would be the SD card reader), but I didn't know any driver for "Texas Instruments PCIxx12 Integrated FlashMedia Controller" and installed the VISTA driver instead. Now, the look of the device is fine in Device Manager, but he only read a normal SD card, and when I insert a SDHC 4GB it came to nothing. In windows XP / vista and linux (fedora / ubuntu) there is no problem with SDHC (4GB and 8 GB Kingmax SDHC class 6).
I would very much apreciate in advance if someone will make a driver for the card reader (I use it pretty mutch for photos).
Hey Buddy,
I think the problem is the Vista driver expired that doesn t work 100% correctly on Windows 7
As much as I know Satellite A300, which supports Windows 7, is also equipped with Texas Instruments card reader, or at least the pilot is also from the same company with respect to the Satellite A200.
In your case, I would try this driver, I hope it works! :)
-
Hi I have just become the proud owner of a Libretto U100. I have a number of SDHC cards 4 GB/8 GB/16 GB. These do not seem to be recognized by the SD card reader in the U100. I installed Microsoft Hotfix:
WindowsXP-KB934428-v3 - x 86 and cards have been seen by the U100, but when the card is accessible the U100 freezes and I have to restart. If I leave the card in the U100 boots then to a black screen, requiring a hard reboot with the SD card removed.I have installed Windows XP Service Pack 3, but still the same problem occurs. Can it be fixed with a patch software or is the card reader SD of Libretto U100 limited to 2 GB SD cards.
Thank you very much
Spymaster
Hi mate,
I checked several sites and couldn t find all the bus information that I know, there should be an SDHC controller version 1.2 in this machine (which is very unusual) and I don't know if the controller can manage cards over 2 GB.
So, I guess the reader can simply handle cards up to 2 GB.
Welcome them
P.S.: You can try a BIOS update but I don't know if that would solve anything
-
Problem with reading card SDHC 8 GB on Tecra R10
Hi all
I own a Toshiba Tecra and just bought a new SD card. It's a Kingston 8 GB SDHC (class 6) and when I insert the card it is not. In Device Manager it says "this device cannot start. (Code 10) ». I have a 512 MB SD card that works very well, but I wonder if the capacity is too large?
Any help you can offer would be widely received, I would use a decent speed/size of card for ReadyBoost, to try to get my laptop to run a little more quickly!
Al
Hello
Maybe the card reader driver is not installed correctly. That explains the error code 10 in Device Manager.
I recommend that you visit the page of the European driver Toshiba and reinstall the driver of player card again to get rid of this error code.
PS; Which Tecra M do you have?
Welcome them
-
Qosmio G10 - compatibility with video cards with VISTA BUSINESS
THE VIDEO CARD IS NOT COMPATIBLE UND UPDATE THE MICROSFT HOME PAGE IS ALSO NOT OK
PLEASE SEND ME AN UPDATE FOR TH QOSMIO G10 GRAFIKHello Michael
Qosmio G10 Vista capable laptop is? There the Vista capable label?
http://support.toshiba-tro.de/KB0/TSB7101O80001R01.htm
-
PA3370 Bluetooth SD Card 3 / Vista
Greetings.
I have a laptop Toshiba P25-S526 and a Bluetooth SD PA3370 adapter. Have used this combo for awhile with Windows XP Home edition.
Under Vista, however, I am having no luck. I downloaded the latest Toshiba BT stack, but when I go through the installation process it does not reach the place where I insert the card - drivers are never located.
Read the Readme file, it says that the new battery (v5.10.01) supports Vista, and it supports the SD Bluetooth 2 card and the card SD Bluetooth 3 (PA3370, which is what I have). But waaayyy down below, under constraints, he mentions that 2/3 maps SD card are not supported under Vista but will be in the "next release".
Does anyone know if there is a timetable for this, or failing that, if there is any sort of workaround?
-Chris
I just check time of output between the batteries. For this reason, I suppose a new version which will be released soon, which should support your card also.
-
Question about the class of a card SDHC for a Camileo H10
Hello
I have recently purchase a Camileo H10 and I want to know what happened if I use a SDHC class 4 card.
He decrease the perfomance of the camcoder?Than you.
It depends on the video bandwidth.
Class 4 = 4 MB/s minimum.
If the video stream is greater than 4 Mbps, there may be a performance issue.
-
NB200 - do not read card SDHC 16 GB
Hello
When I insert SDHC in the NB200, autoplay starts but then just continues to run on a loop and the area of mixed content appears. Sometimes, I was able to see what is on the SDHC card if I click 'Show files' in the content area, but not always and still just autoplay starts again.
Now, I can be stupid, but it is allowed to use an sdhc card in a SD adapter? Must be the same brand? I downloaded the fix both the driver sd player, but doesn't seem to work. Help, please!
Thank you
SimonHi chuckles123,
Did you check the manual if your laptop supports 16 GB SHDC card? This should be done first before you do things
If your computer supports these cards, update the driver of the card reader and try different cards. Furthermore, is what 16 GB card exactly? I have a good experience with SanDisk cards, never had any problems with them.
-
Card SDHC read problem. XP Home w / SP3.
I have a relatively new PC with Windows XP Home Edition, SP3, and yet I can't read an SDHC card in the embedded player. When I try to install the patch, I get a message saying that the software that I'm trying to install is older than my current level and the installation fails. The SDHC card reads fine in the printer and on my Panasonic Plasma.
Hello Outerub,
Thank you for your message. Go to the website of the manufacturer of your computer and download/install the latest drivers for your card reader. Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot find network cards with Vista
Hello
I have problems with my Dell Inspiron 1720 under Vista not recognizing one of my network cards. I checked that my modem and router work correctly (they are) but still my laptop will not pick up not my Belkin N1 router wireless signal or when I hard it wire as it says network adapters are not found. I had a series of reports of unusual message telling me that the 'State of dependency is unknown", and that I should try to restart the DCHP etc. I followed the instructions to the point where it says "Windows cannot fix this problem - contact your service administrator.
Any thoughts?
Did you check the status of your network adapters in the Device Manager? If they are disabled, try allowing them.
I hope I could help
-
Card SDHC do not read on windows 7
Hello.
I was wondering if someone can help me. Whenever I insert my SDHC card in the laptop Acer Aspire 5332 of map my windows 7 run player, he said that no driver is available. What should I do?Hi Sbuder,
Have you updated your drivers yet? You must update your computer manufacturer Web site:
http://support.Acer.com/supportdocs.aspx
Also from the website of the manufacturer of the SDHC.
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
ERROR of e/s on CARD SDHC DEVICE
I need your help. I use Windows XP Home Edition. I load pictures to my PC via a USB cable plugged into a small device that I insert my camera SD memory card. If I use a 2 GB or more small memory card, everything works fine. When I try to use a larger memory cards (4 or 8 GB), I get an IO ERROR of DEVICE. I need to be able to use the larger maps for my new camera. What should I do? Thank you.
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
How to export music from a card sdhc my computer?
My laptop has a slot for SD memory card. If I put an SDHC in how to transfer music to the card?
In computer science, he'll have a letter. Copy it in this letter
Maybe you are looking for
-
Satellite U920T - display, touchscreen and camera stopped working
My U920 was goten worse every day, first the thouchscreen, then did the cameras and finnally today the screen has stoped working. The attachment of ribon has problems, don't know if I'm the only or if it is a design problem, but the main problemhas w
-
Where are my other 2 RAM slots? Y570
While I was in the store, I asked the representative how many RAM slots has the Y570 sales and he told me 4 and he even showed me on a program called Speccy has 4 RAM slots and only 2 are occupied, leaving me with 2 slots empty RAM for future updates
-
In Windows Live Hotmail, I tried 2 update my profile .my alterniative email is cancelrd more a year ago. Hotmail sent to email conformation abandoned... What should I do? Don't want to lose my Hotmail. What should I do?
-
Desktop, desktop icon, bar of tasks and startbuttons are locked or hidden or misssing
My computers all icons on the desktop, start button, taskbar all are locked. start the computer, it opens with an Explorer window. but the Office remains often hidden... from the Control Panel, I tried to click on the "taskbar and Start Menu"... but
-
Hello I bought my laptop in Germany with German Windows Vista, and Windows 7 Home Premium upgrade DVD edition was. Can I switch to the English edition of Windows 7 Home premium using the key of the German language which came to me? Thank you very muc