Carpet * a DVD-RAM UJ-850 s does not read blank media - need new firmware

Hey I have a laptop Equium only around the age of 4 months.
Had nothing but problems with the CARPET * A DVD-RAM UJ-850 s ATA Device drive.
I need to know where I can get the update of the firmware.

Firmware for it, that she will not read blank media.

I agree with master... I don't know what kind of problems you have, but if the player doesn't work properly, it must be replaced. The warranty is certainly valid and the nearest authorized can help you with it.

Maybe you made a mistake. Take your laptop to the nearest service and show them what you mean exactly. Here, we can only speculate what may be your problem.

Tags: Toshiba

Similar Questions

  • Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

    My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
    The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

    He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

    Someone to help they could offer cause I'm running out of space and I really want to delete my files.

    Thank you

    Hello

    It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

    Another clue;
    Have you tried to delete the upper and lower filter registry entries?
    Try it. Sometimes such procedure can simply bring the reader to life.

    The detailed procedure and description has been published here in the article Microsoft Knowledge base:
    http://support.Microsoft.com/kb/314060/en-us/

    Good luck

  • Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

    My laptop seems to have decided to stop reading data disks.
    However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
    I searched internet day for solutions and tried without success to the following:

    Removed the UpperFilters and LowerFilters in the registry.
    Uninstalled and reinstalled drivers.
    Bought DriverWhiz (waste of money!)
    Tried to access disc command prompt that generated the message "incorrect function".
    Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
    Uninstall service packs
    I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
    I uninstalled real player

    I'm about 3 minutes to destroy my laptop so any help would be appreciated.

    Laptop: Equium A200 - 1V0
    Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
    OS: Windows Vista

    Hello

    Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

    How about windows boot CD or a linux live CD?
    Is this possible?

    If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

    In this case, only a replacement CD/DVD drive can help greet

  • Carpet * a DVD-RAM UJ-820 s does not work in Satellite M30X 122

    Hello!

    I am owner of a Satellite M30X - 122 Notebook with Mat * one reader CD DVD-RAM UJ-820 s.

    In recent weeks the disc suddenly stops working during normal use, no error message, in Windows XP System Device Manager all entries are ok, the drive is enabled and visible.
    !! Optical media access LED lites permanently, so that the reader is always available!
    I have tried using different CD, reboot Notebook, removing battery State is always the same, LED blinks several times then it lites permanent.
    After a few hours this phenomenon disapperars and I can use the drive without any problems. ! It is very annoying!

    Someone at - it experience with this problem? Please let me know.

    Don't you think that the drive needs to be replaced?
    In this case (I tried a Mat * a DVD - RAM UJ-820 s on the www, I found none just renovated, new readers) does anyone know where to get a new, or a compatible UJ-820 s drive.

    Thanks in advance.
    Have a good evening.

    Hello

    I don't know where you live and can not recommend any PC shop but you can order it by the authorized service partner.

    You can also view s manuals for Satellite M30X, and page 5, you will find a list of all compatible optical disk drives. Do not buy the same but much better if you want. I hope that this info will help you find the new drive.

    Troubleshooting I can't say a lot. Try to remove the device from Device Manager and reboot the device and test again but with original media only. Make sure that you can see the contents of the CD or DVD using Windows Explorer.

    If nothing is done check for replacement.

  • Carpet * a DVD-ram UJ-845 s does not work

    Hi everyone, I'm a little crazy for my dvd player, about 14 months I bought my 3rd toshiba laptop already.

    In the first (Satellite 5200) dvd player (combodrive with installation of dvd ram built in) has not already after a few months. I brought this back to Toshiba customer service twice and replace that thing (mast * a) twice as well... Then, the player broke down again.

    With the new Toshiba, I bought (Qosmio G20) I just got the same problems, dvd and cd function work correctly sometimes (unfortunately sometimes not as well), but the player (mast * a UJ-845 s, DL DVDwriter) recognizes not all all DVD ram.

    I hope someone can give me a hand with this problem, I'm really a little crazy about it now, and I don't want to keep running and visit the Toshiba Service Center every 2 / 3 months for the rest of my life...

    Thanks a lot anyway!

    Best regards, Erik

    Hi Erik

    It is very strange that you have problems with sides. Over the past 7 years, I worked on 5 different Toshiba laptops and I, but really never had no problem with the chance. I always use the same empty media TDK (DVD-R, DVD - RW and DVD-RAM). Everything works fine.

    I have always taken out of pre-installed software and use Nero since the beginning. I really put t understand why the DVD-RAM media are not recognized, but please do not forget the DVD-RAM driver is pre-installed correctly.

    Have you noticed that with the factory settings?

  • Carpet * a DVD-RAM UJ-820 s do not read or burn discs

    Hi, I'm Natalie and I need help with my problem that occurs.

    Operating system:
    Windows XP Home Edition
    Laptop Toshiba Satellite
    Model A75-S229
    Multi recorder drive: CD and DVD

    The problem that happens is that I can not get any CD or DVD to work when I put them. What is happening is he's trying to load but makes the window "Not responding", unless I have the disc, then everything will be fine. What is also involved, is that I can't burn discs at all, at any speed.

    Also, I would add, when I go to my computer > right click on the DVD - RAM drive > properties and under the general tab it states:

    Type: CD player
    file system: unknown

    I don't know if that's the problem...

    Can someone help me?

    HI Isabelle.

    Please check in the Device Manager to see if there is a problem with your optical drive. Normally this will be displayed as an exclamation point against the device.

    The fact that the file system is listed as "unknown" is because the drive could not read the format of the disc so that Windors Explorer cannot identify any file structure.

    Your problem could be something very simple like a lens dirty or a faulty device driver. It is not easy to tell from your description exactly what can be wrong, but I would say you try some of the easy options so try first to clean the lens, and if this does not resolve your problem, then try to remove the drive (Device Manager) and reboot for the device will be installed new.

    If all else fails, you will have checked player be an authorized Service partner.

    Kind regards

  • Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

    I'm a big supporter of Toshiba product.

    Please help me

    Given that I had to do to update form my * Toshiba Qosmio G20-123 *.
    My * DVD UJ-845 s * do not read any CD or DVD.
    Before that, he worked a lot of good. But unfortunately now, he does ' t read anything.

    The system to recognize it. The driver is installed and working properly.

    After I installed supports DVDRAM of Toshiba.
    The same thing occurs when playing a CD, the system tells me:

    * E: / not accessible *.
    * incorrectness function *.

    I try with a program on the net but no way.

    I was well able to put the original firmware, but I could not find.
    If someone can do a dump of the original Firmware for me it will be a miracle for me.

    Help, please.
    My great respect.

    I think I can help you:

    Go to my computer right click on the CD/DVD drive.
    Now go to properties; Click the Recording tab and check "Enable CD writing on this drive".
    Now click on apply and restart the laptop.

    Check of workaround and post comments

  • Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

    OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
    This cannot be a hardware problem, it must be the software should not it?
    Can anyone help?
    Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
    Unfortunately the computer is just out of warranty

    Hi Robert,.

    Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

    I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

    Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

    Kind regards

  • Installation of Win7 on Satellite A210-128 using carpet * a DVD-RAM UJ-850

    Hello

    I have a question about the installation of different OS Vista provided with Toshiba Satellite A210-128.

    I Mat * a DVD - RAM UJ-850 drive and it will not read the CD bootable XP.
    I found a few posts in other forums that this drive won't allow me to install XP.

    So here's my question: someone at - he tried to install Windows 7 (RC TE) with this drive? Or maybe someone has been successful with the installation of Windows XP?

    Thanks to all those who would like to help :-)

    Hi mate

    I think you're a little confused, but I want to help you.
    First of all it s any CD/DVD drive is installed in your laptop.
    The installation of Windows XP and Win 7 should work with all readers who are able to read the CD or DVD.

    I guess that you were not able to install Win XP because the CD/DVD drive was not able to manage this particular drive.
    A friend of mine had the same problem with the other player. After a long period of use of the window of disc was not readable.
    But he could solve this problem. It has burned (copied) the Win XP disk on another CD and then used the second drive to install Win XP.
    The reader to read the other disk correctly.

    Win XP and Win 7 are released on different disk but in most cases the readers should not have any problems with this disc
    But if so, then it s mostly a problem of CD/DVD disc

    See you soon

  • Satellite A200 - Mat * randomly a UJ-850 s does not read certain DVD or CD

    Hello

    I have problems with my dvd player Mat * a UJ - 850 s (firmware 1.40)

    Randomly, he's not reading certain dvd or cd.

    I called Toshiba support and they asked me to update the firmware.

    I explained that there are 3 updates of firmware for a player of TSS (NEC) DVD from Toshiba Web site but * NOTHING * for MAST * A

    They asked me to install the Toshiba disc reboot before sending to repair. Today I had time to fix it, but it does not read the startup disk!

    So I ask for Toshiba to publish an update of firmware for Mat * a UJ - 850 s

    What you mean under some CD or DVD?

    It is well known that something like this can happen. Because of this if you write here on self made CD/DVD, use empty brackets just high quality.

  • Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

    Hello

    cannot find answers to my problem, so start a new topic.
    Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

    Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

    First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
    After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

    Simple disc burning layer without problem.

    Anyone any idea how to solve this problem?
    Thank you
    Luci

    Hello

    tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

    I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

    Would be nice if you give some information on this case... :)

    Welcome them

  • DVD-RAM UJ-820 s does not work on the Satellite A50 - 543

    Hello

    My present DVD-RAM UJ-820 s on Satellite A50 543 is not working correctly, original part is very expensive. Can I order to cheaper NEC AD - 7543A or NEC AD - 7540 A, but I don't know is it compatible with my Satellite A50 543 or not.

    Who can help me?
    Thanks in advance

    Hello

    From my experience not every disc is compatible with your laptop. It depends on the master / slave / parameters c - salt.
    The settings on the disks online slim for laptops is not editable as on desktop drives by putting the jumper.
    The thin line command does not support riders, and so the firmware controls the settings.

    But dnf666 already replaced the drive on sat 5200 and maybe your favorite player might be compatible

  • Satellite M-40, Mat * a DVD UJ - 831S does not read blank DVD

    It does not read empty, brand new DVD discs: Sony, TDK, etc., showing "a drive not accessible" and with a memory full 0 kB! but it reads DVD movies

    Hello

    Have you installed the Roxio Easy CD Creator software on your laptop?
    This problem may occur the Roxio CD recording program Easy CD Creator is installed on the computer, and if the version of the CD recording program is not compatible with Windows XP.

    Please check this page from Microsoft:
    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

  • my dvd - rw cd playback, but does not read the dvd.

    I have computer fz190 portable vaio, the interesting thing that, previously, my laptop read DVDs and now does not read, while my device to read the CD.

    Hi MAHDI roozzi,.

    1 when was the last time it was working fine?
    2. what happens when you try to play a DVD?
    3. you receive an error message?
    4. you have any CD to third parties | DVD burning software installed on the computer?

    First run the fix it tool available in the link below and check if it works.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    If the previous step fails and then uninstall any third-party CD | DVD burning software installed on the computer and check.

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Stereo does not read the Sansa Clip after firmware update

    Hello

    I upgraded to the last 2.01.35a of the previous 32.

    Before that, my channel stereo would connect to the Clip and play songs using the USB connection, I can use the remote to change songs, now with the new update of the firmware it does not read the content of the Clip.  Clip said 'Connected', but the stereo repeat me 'Reading' forever.

    I came back to the previous version and it works again.

    Is there a problem with the latest version of the firmware?

    Also, since I was in Europe, Updater I updated the European version and this limited the volume a LOT.  So I downloaded the US version is now at normal volume.  The European version is too quiet and I can't hear a thing if there is a background noise. But still, the USB connection in the stereo works with version 2.01.32 and not 2.01.35.

    any ideas?

    Thank you.

    one.

    Hello

    I tried AutoDetect, MTP and MSC and none worked.

    Now everything works well again, and I will consider the reset factory settings to change the region for other times.

    Thank you.

Maybe you are looking for