Carpet * a DVD-RAM - what media use?

I have a Satellite M40 with Mat * a dvd - ram UJ-830. I'm unable to find compatible media, IE dvd - r or + r to buy with confidence. I had tons of verbatim 4 and 2 rates, platelets, but they are not recognized at all.

Still a few old cheap Piodata are fine, but cannot get them now.
Everyone knows consistent success with pads available in the United Kingdom?

Hi Tony,.

I have a rug * an optical drive installed in my SA30 and I always use DVD-R Datawrite discs. I used the high gray, yellow-top and, recently, the variants of red-top without any problem whatsoever.

I can't comment on other formats (although I used the DVD - RW on the odd occasion) because my internal DVD burner will accept only the DVD-RAM and DVD-R formats.

Moreover, the DVD-RAM format works well in my laptop but I found that it is not always supported by the software. Nero seems very happy with it, but the likes of DVDSHRINK don't even look.

Kind regards

Tags: Toshiba

Similar Questions

  • Carpet * a DVD-RAM UJ-850 s does not read blank media - need new firmware

    Hey I have a laptop Equium only around the age of 4 months.
    Had nothing but problems with the CARPET * A DVD-RAM UJ-850 s ATA Device drive.
    I need to know where I can get the update of the firmware.

    Firmware for it, that she will not read blank media.

    I agree with master... I don't know what kind of problems you have, but if the player doesn't work properly, it must be replaced. The warranty is certainly valid and the nearest authorized can help you with it.

    Maybe you made a mistake. Take your laptop to the nearest service and show them what you mean exactly. Here, we can only speculate what may be your problem.

  • Carpet * a DVD-RAM UJ-811 can't be used with some DVD-R

    I have a laptop Toshiba Satellite P10 554 with XP SP2 and a carpet * a DVD-RAM UJ-811. The problem is that a lot of DVD - R (or DVD - RW) discs cannot be used for burning. If I try such a DVD with Nero a get the error message "disc not initialize - disc may default. Other DVD - r work on my computer.

    It's an update of the firmware of my DVD player. I currently use the H100 firmware version. Unfortionately I do not found any update of Web site (tried toshiba, mast * a, panasonic,...)

    Anyone have an idea how to solve the problem? Is perhaps firmware version top data? How do a get a new firmware?

    Hi haerti,

    I can't find a more recent firmware, too! In my opinion, you should try some different DVD - R from other providers! If this does not resolve the problem then I think you should contact Toshiba Service partner for the NB of a short health check!

    Https://eu.computers.toshiba-europe.com then support & downloads and find an authorized service partner you fid the closest!

    Bye and happy new year!

    Sam

  • Carpet * a DVD - RAM UJ-811 drive

    Laptop: Satellite A10-S703
    Carpet * a DVD - RAM UJ-811 drive supports 2 x DVD-R burning.

    The minimum speed of blank media DVD-R available on the market is 4 x.

    A warning on the cover of Imation DVD - R 4 x recordable disks says
    "Download the free firmware required to avoid damaging your Player 2 x" the given url is http://www.imation.com/products/dvd_media/dvd_firmware.html

    The links provided under Toshiba / Panasonic are not useful.

    Can someone guide me if I can burn 4 x media on this drive?

    Thanks in advance!

    Hi Ravi,

    If you have the DVD burner that can burn DVD-R with a speed x 2 there is no way to improve the speed of burning at 4 x speed.

    Some firmware updates of aid to enable support for new media and has increased by a few burning questions (results of optimal registration for your reader).

    Good bye

  • carpet * a dvd - ram uj-820 s

    My satellite a60 don't overlay the carpet * a dvd - ram uj-820 s at all. The system said that it does not, or he says he broke. But I don't know that it is not broken. What should I do?

    Hi Justus,

    Check in the Device Manager to see if your DVD-RAM is displayed. If it is you can try the troubleshooting for her option.

    You can also try to remove the device and then re - start, in this way, the system should see the drive and reinstall.

    HTH

  • CARPET * a DVD-RAM UJ - 841S: cannot burn DVD/CD more

    Hey people,

    I have a problem with my DVD/CD drive, I can't burn files more. My CARPET * a DVD-RAM UJ - 841S can always install things of CD and erase DVD/cd but I can't burn more.
    Anyone know how I can fix this problem?

    cordially Egbert

    To me, it seems that the lens of the drive can not calibrate correctly
    The bed or write drive before the middle of the lens is calibrated in the right position.
    If it fails, the drive is not able to manage the CD or the DVD.

    Usually nothing help to wait for disc replacement

    Oh wait maybe a cleaning the lens help
    You can try to clean the lens. You can use a lint cloth

  • Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

    My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
    The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

    He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

    Someone to help they could offer cause I'm running out of space and I really want to delete my files.

    Thank you

    Hello

    It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

    Another clue;
    Have you tried to delete the upper and lower filter registry entries?
    Try it. Sometimes such procedure can simply bring the reader to life.

    The detailed procedure and description has been published here in the article Microsoft Knowledge base:
    http://support.Microsoft.com/kb/314060/en-us/

    Good luck

  • Installation of Win7 on Satellite A210-128 using carpet * a DVD-RAM UJ-850

    Hello

    I have a question about the installation of different OS Vista provided with Toshiba Satellite A210-128.

    I Mat * a DVD - RAM UJ-850 drive and it will not read the CD bootable XP.
    I found a few posts in other forums that this drive won't allow me to install XP.

    So here's my question: someone at - he tried to install Windows 7 (RC TE) with this drive? Or maybe someone has been successful with the installation of Windows XP?

    Thanks to all those who would like to help :-)

    Hi mate

    I think you're a little confused, but I want to help you.
    First of all it s any CD/DVD drive is installed in your laptop.
    The installation of Windows XP and Win 7 should work with all readers who are able to read the CD or DVD.

    I guess that you were not able to install Win XP because the CD/DVD drive was not able to manage this particular drive.
    A friend of mine had the same problem with the other player. After a long period of use of the window of disc was not readable.
    But he could solve this problem. It has burned (copied) the Win XP disk on another CD and then used the second drive to install Win XP.
    The reader to read the other disk correctly.

    Win XP and Win 7 are released on different disk but in most cases the readers should not have any problems with this disc
    But if so, then it s mostly a problem of CD/DVD disc

    See you soon

  • Carpet * a DVD-RAM UJ-820 s does not work in Satellite M30X 122

    Hello!

    I am owner of a Satellite M30X - 122 Notebook with Mat * one reader CD DVD-RAM UJ-820 s.

    In recent weeks the disc suddenly stops working during normal use, no error message, in Windows XP System Device Manager all entries are ok, the drive is enabled and visible.
    !! Optical media access LED lites permanently, so that the reader is always available!
    I have tried using different CD, reboot Notebook, removing battery State is always the same, LED blinks several times then it lites permanent.
    After a few hours this phenomenon disapperars and I can use the drive without any problems. ! It is very annoying!

    Someone at - it experience with this problem? Please let me know.

    Don't you think that the drive needs to be replaced?
    In this case (I tried a Mat * a DVD - RAM UJ-820 s on the www, I found none just renovated, new readers) does anyone know where to get a new, or a compatible UJ-820 s drive.

    Thanks in advance.
    Have a good evening.

    Hello

    I don't know where you live and can not recommend any PC shop but you can order it by the authorized service partner.

    You can also view s manuals for Satellite M30X, and page 5, you will find a list of all compatible optical disk drives. Do not buy the same but much better if you want. I hope that this info will help you find the new drive.

    Troubleshooting I can't say a lot. Try to remove the device from Device Manager and reboot the device and test again but with original media only. Make sure that you can see the contents of the CD or DVD using Windows Explorer.

    If nothing is done check for replacement.

  • Carpet * a DVD-ram uj 820 does not read anything

    Hello everyone,
    My problem: the DVD player and CD used to run perfectly since 2 years ago, I bought the laptop.
    A week ago the driver suddenly stopped reading and not reading any CD or DVD, no music, no data.
    Nothing...

    Can someone help me?
    Thank you, J.

    Hello

    It is possible that the drive is faulty, but to confirm this, the drive must be verified by the service. It will be interesting to know what exactly happens when you try to use certain media. Is the absolutely silent drive with no activity or the control LED lights up and car tried to read the media? What is the status in windows Explorer? If the list, what happens when you click on ODD? Is an error occurs?

    What you can do is:

    Remove the drive from Device Manager, and then restart the device. After this check the functionality.
    Try to clean the lens
    Playback option with CD or DVD original only test
    I'm not sure this will help, but if it happens all of a sudden try to restore the operating system by using the system restore utility

    It is really not easy to tell what the problem may be, but it is really possible that the drive is dead.

  • Carpet * a DVD-ram UJ-845 s does not work

    Hi everyone, I'm a little crazy for my dvd player, about 14 months I bought my 3rd toshiba laptop already.

    In the first (Satellite 5200) dvd player (combodrive with installation of dvd ram built in) has not already after a few months. I brought this back to Toshiba customer service twice and replace that thing (mast * a) twice as well... Then, the player broke down again.

    With the new Toshiba, I bought (Qosmio G20) I just got the same problems, dvd and cd function work correctly sometimes (unfortunately sometimes not as well), but the player (mast * a UJ-845 s, DL DVDwriter) recognizes not all all DVD ram.

    I hope someone can give me a hand with this problem, I'm really a little crazy about it now, and I don't want to keep running and visit the Toshiba Service Center every 2 / 3 months for the rest of my life...

    Thanks a lot anyway!

    Best regards, Erik

    Hi Erik

    It is very strange that you have problems with sides. Over the past 7 years, I worked on 5 different Toshiba laptops and I, but really never had no problem with the chance. I always use the same empty media TDK (DVD-R, DVD - RW and DVD-RAM). Everything works fine.

    I have always taken out of pre-installed software and use Nero since the beginning. I really put t understand why the DVD-RAM media are not recognized, but please do not forget the DVD-RAM driver is pre-installed correctly.

    Have you noticed that with the factory settings?

  • Carpet * a DVD-RAM UJ-820 s do not read or burn discs

    Hi, I'm Natalie and I need help with my problem that occurs.

    Operating system:
    Windows XP Home Edition
    Laptop Toshiba Satellite
    Model A75-S229
    Multi recorder drive: CD and DVD

    The problem that happens is that I can not get any CD or DVD to work when I put them. What is happening is he's trying to load but makes the window "Not responding", unless I have the disc, then everything will be fine. What is also involved, is that I can't burn discs at all, at any speed.

    Also, I would add, when I go to my computer > right click on the DVD - RAM drive > properties and under the general tab it states:

    Type: CD player
    file system: unknown

    I don't know if that's the problem...

    Can someone help me?

    HI Isabelle.

    Please check in the Device Manager to see if there is a problem with your optical drive. Normally this will be displayed as an exclamation point against the device.

    The fact that the file system is listed as "unknown" is because the drive could not read the format of the disc so that Windors Explorer cannot identify any file structure.

    Your problem could be something very simple like a lens dirty or a faulty device driver. It is not easy to tell from your description exactly what can be wrong, but I would say you try some of the easy options so try first to clean the lens, and if this does not resolve your problem, then try to remove the drive (Device Manager) and reboot for the device will be installed new.

    If all else fails, you will have checked player be an authorized Service partner.

    Kind regards

  • CARPET * A DVD - RAM UJ-8208

    Hello.
    I just bought this laptop and I have trouble with the CARPET * a reader of DVD - RAM UJ-8208.
    AutoPlay does not work.
    I have it set it right in the menu option for Auto pay, but still the CD does not start automatically.
    Anyone noticed the same problem?
    If you know please share this information.
    Thank you.
    [P-30 (Tommy)

    Hello

    is this Auto Play has worked with the default settings when you bought the device and started for the first time?

    Have you changed the operating system os is the OS of the resumption of the work of Toshiba?

    Don't yo tried to do a Firmware update?

    Bye Bob

  • Carpet * a DVD - Ram UJ - 841 S DVD burnning speed

    HAVE someone at - IL FOUND in DVD THAT WILL WRIGHT A 8 x DRIVE on THIS DVD RAM. PLEASE LET ME KNOW.
    RITEC G05 NO GO will BE ONLY WRIGHT to 6 x a FEW TIMES at 2 x

    Hello

    What model of laptop comes with this drive?

  • Carpet * a DVD-Ram UJ - 841S comes with several error messages

    My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

    I also can't rip music discs.

    Can you see ODD listed in Device Manager, and if so what is the exact status it?

    Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

    Please more information!

Maybe you are looking for

  • example code for NI9411

    Hello I'm looking for a simple example of code for NI9411 (FPGA code and the host). I searched in the examples that come with LabView but I have not achieved anything. Thanks in advance.

  • Windows NOT FOUND symbols for kernel32.pdb and ntdll.pdb

    Hello. IM using WinDBG debugger and symbol ntdll.pdb (BD004B03-CD45-4547-9505-CC01C52DAB6A) e kernel32.pdb (91190C2D-9250-489E-802F-A755C83E8C83) ARE NOT in the symbols of Windows Server. So I can't use the extension!ntsdexts.locks SYMSRV: http://msd

  • Running one of the virtual machines on two physical servers at the same time. Server 2012

    Hello! I'll admit that I'm not exactly an expert Server nor I claim to be. I could use some help with the installation I build and eventually moving customers to server setup. In an effort to try to describe my question, here is a first draft of what

  • Skype dowwloading

    tried to download Skype says theres a virus

  • Bad recording playback quality

    When I record my voice with a microphone, or only through micro computer, when I play it back makes my voice sound very low and deep.  Is it because of my SigmaTel Audio (its provided with my computer card)?  I have Windows XP.