CarPlay cards do not switch to night mode

Similar Questions

• Requests for night mode

  I've seen some suggestions for night Mode, and I thought I would add my voice. I think I saw these applications elsewhere, so I don't think I'm the only one who would like to see these.

  1. If the dashboard is in night mode when an alarm goes off, allow to stay in night mode, if the post alarm action is "previous screen".

  2 when you use the timer, the dashboard switch to night mode when the timer expires rather than by saving mode. (I think also it would be nice if now pressed the snooze button, you are in mode night rather than saving mode.) Does anyone use same power saving mode if often may not be back in the system menu for those rare moments, is it necessary?)

  3. show the current weather (perhaps conditions may be in the text format to keep the dim screen) or just the temperature mode at night. Bonus points for also show the forecast for the day ahead.

  4 be nice if you can use the menu without leaving the night mode, especially if you want to control the music.

  Maybe to have a dark theme that looks like the current mode of the night (essentially a large clock with no display app) could be an idea... I could see this resolution #1 and #4, but I think that the brightness sliders would need allow the screen to go drive then it does now, given that the sliders do not allow the screen to go dark when night mode he demonstrated a theme.

  Because the dashboard is connected to a peripheral internet, the best way to "fix" most, if not all users associated issues with sun/light, night mode and alarm time display of the reactions are to activate an option for the dashboard in order to exploit its display based on the times of sunrise and sunset the Sun for the location of the users. In addition, a slider to customize and set the brightness of "dim" within hours to lift / bed of Sun and a check box if the dashboard to automatically mode at night at the time of the sunset are needed.

  By implementing an option of sunrise/sunset, when a person sets their alarm for 04:30, the dashboard with know it's still dark outside and the screen will remain in night mode (or a parameter custom Sun) and in this mode for all options (IE main screen etc.) after the alarm is turned off and in this mode selected until the time of the rising of the Sun. This way you and your spouse will not be exposed to a blinding light when the alarm goes off and subsequently. When a light in the room is lit, the optical light sensor should recognize this and turn the table EDGE for normal operation and the brightness for the display. However, when ambient light is off and the time has not reached the time of Sunrise, the dashboard will return to the mode night until dawn is filled. Night at the sunset, the dashboard should automatically enter the night (or custom obfuscation) mode and turn only light and switch to normal mode when the room light is turned on. Here's how it should work in detail:

  For example with night auto mode checked and sunrise / sunset option enabled:

  07:20 sunrise / sunset is 16:45 / wake up at 05:00 / sex 23:00

  @Bedtime 23:00, the dashboard is already in night mode, since it's after the sunset. The dashboard display will be bright (out of the night mode) when the light is on, get into bed, turn out the lights, DASH will return to the night mode. If you need to change the alarm settings or watch the screen AT this time or any time between the sunrise /sunset times with ambient light, touch anywhere on the screen and the dashboard will return to normal mode, BUT to your darkness to measure because the time between sunrise and sunset Sun times. Alternatively, you can turn on your bedside lamp, DASH automatically exit the night mode and return to normal brightness, do what you need to do on the dashboard, turn off your bedside lamp, the dashboard automatically goes into night mode.

  @5 am, the alarm sounds, is not after the duration of dawn yet, so the dashboard is in night mode. If the ambient light is activated, the dashboard display will be bright, but after turning off the light, the dashboard will return to the mode night until the sunrise at 07:20

  @ the Sunrise 07:20 time, dashboard refers to "normal operation".

  @ 16:45 the sunset time, the dashboard goes into night mode.

  With automatic night off mode, everthing is the same, except at the time of the sunset, the dashboard goes out to your custom configuration of Penumbra. This custom twilight mode, a button "Night Mode" should be on the screen for easy access to night manually mode at bedtime. At the time of the alarm the DASH will enter into your custom shadow (with the ability to easily select the mode night for the purposes of joint review panel), and then at the Sunrise, the dashboard back to normal.

  SONY, that's how you have to fix the awakening of the table EDGE and brightness of display problems.

  1 download auto implementation of the daily sunrise / sunset hours sunlight for the location of the users.
  2. implement an option to toggle Sunrise and sunset the sunset feature.
  3. set up an option for automatic night mode using the sunrise / sunset times.
  4. implement a cursor for a twilight custom during the sunrise / sunset times.

  Operations of firmware:

  1. get time sunrise/sunset from the internet
  2. after the time of the sunset, night mode auto or user setting sun
  3. after the time of the sunset, the room lights on = normal display
  4. after the time of the sunset of the room light off = auto mode or user dim position night
  5. after the time of dawn, (current) normal operation at any time until the sun goes down
  6. Insert a touch of sleep screen mode to display mode dim custom between sunrise /sunset times

  If the alarm sounds before the sunrise time:
  1 go back to the position night mode or user dim

  It is essential for the dashboard, as a bedside alarm clock, to work as indicated. Please consider this correction to the dashboard.

  Best regards

• Where do we control the automatic switch to silent mode at night?

  I use the Photon for months, but may doesn't seem to find the area that handles when the Photon passes silently.

  I thought that's custom battery mode. I put it to Custom battery saver, set hours off-peak hour from 22:00 and ends at 05:00.

  My alarm goes off at 5:30, but it sounds ever, even if I put it in the alarm set to do.

  I noticed that the phone automatically switch to silent mode around 21:00 and not auto will spend up to that 8 or from 09:00. I get frustrated and set it to ring when I first use the phone in the morning.

  Is there a file I need to change to get my time window in? It makes me a little nuts, lol.

  
  

• first instance LR 6 cc import goes well with the various cards, that one card does not work, usb HDD with only images, map 9571 photos 115GB, sometimes only 300 photos, then wait all night nothing, try the separate subfolders, only two (including su subfo

  trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?

  Hi willemm,

  first instance LR 6 cc import goes well with different cards, that one card does not work.

  Could you please develop the issue you are facing?

  What is the image format you import?

  USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics

  I would not recommend to import gb 115 library at once.

  Kind regards

  Assani

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• New Intel 6300 Wlan card does not work in Satellite P850/49

  Hello

  I recently installed a new wifi card on my laptop in order to give him a dual-band support.

  However, while all goes well in terms of hardware and driver installation, the computer fails to actually use the wifi card and insists on the fact that the card is 'off', even if it is enabled in the Device Manager, the computer recognizes and the computer is not on the airplane mode.

  There is no physical switch on the laptop or the card, the function key does nothing (except the conversion between flight mode and without work), and even diagnostics insist that I need to "activate the wireless feature.

  Help?

  Not great if you want to be able to get this card.
  In many cases new modules and hardware parts don t work because of compatibility issues. Even if the module supports the Mini PCI standard, this means that all card mini PCI Wlan would be compatible. It is a big misunderstanding.

  However, I found some interesting tips on the page of Intel:
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025332.htm

  What you could do is:
  In Control Panel > network and Internet > network connections, right click on the adapter. Check if the adapter can be set to the it.

  Alternatively, you can try to install the Intel® PROSet/Wireless WiFi Connection Utility
  You can enable or disable the wireless radio in the Intel® PROSet/Wireless WiFi Connection Utility main window. The status icon on the main window displays the current state of the radio. In the main window, click on WiFi or WiFi turn off to enable or disable the radio.

  In which case it wouldn't work, I guess that the laptop cannot turn on the wireless network card because of the allocation of the different pins.
  For example, some mini-PCI WLan cards needs to hide the axis 20 (thin strip of electrical tape and it is stuck on the 20 PIN) in order to obtain this permit.
  Google search for mini pcie pin 20 and you will find that you are not the only ones with this problem.

• Vibration of the blackBerry boring Z30 in night mode.

  Hello

  After having upgraded to 10.3.1 I vibrations of enforcement notifications even if the phone is in night mode, which as anyone can imagine is extremely boring.

  More details about it: I don't get vibrations of all applications, only a few specific Android apps. Another weird thing that could be linked to this is that in the settings-> Notifications-> profile of bedside (or all other profiles)-> App Exceptions, I have apps that have the same name but I don't see one here. One of the applications that vibrate in bedside mode is in such a case.

  I hope that this issue can be resolved. Thank you in advance!

  Here's what I did to trigger notifications from Google maps and other android apps. Yes, it will not be displayed in the usual settings of notification BB. Please follow these steps.

  (1) install the application called 'Ghost Commander File manager' (https://play.google.com/store/apps/details?id=com.ghostsq.commander&hl=en) . Can be sideloaded via the snap or according to the method you prefer.

  (2) open the Ghost Commander application and go to "Applications".

  (3) scroll down to where you see "Maps". LONGPRESS (hold) 'cards' when you see another pop up window where you have an option called 'manage '.

  (4) check the "show notifications.

  You should be able to stop the notifications from google maps and similar other android applications, follow these steps.

• Unlocked IPhone, SIM card is not valid problem

  Hello

  I went to study in the United States for a few months and I bought the iPhone 6s 'apple Store' to the United States.

  After that I came back to Thailand, I can't use my card SIM Thai (AIS network). It appeared that the sim card is not valid.

  I had to call apple care to solve the problem for me and after gave them my IMEI, they told me to contact verizon wireless to unlock my phone.

  So far, I confused altogether since I bought the Apple Store iphone, not Verizon.

  However, I contacted verizon wireless and even once, after gave them my IMEI, they said that since

  the unit was purchased third-party (which is apple Store) so that the device has not been locked by their network.

  I tried to restore my device so many times and also with the mode of recovery, but it still can not use.

  I checked with APPLE and they said that my device is unlocked model.

  Note that first sim that I plug when I got this device is ATT SIM card.

  I was contacted to ATT and they also said that my device has not been locked

  through their network.

  Please give me suggestions on how to solve this problem

  It seems that if you have the iPhone version, intended for use on the Verizon network. If so, it is not locked. However, this does not mean that it will work on the network in your country.  Phones, designed to run on the Verizon network use strips of LTE 13, 4 and 2. It seems that the AIS uses 3 and 1.

  https://en.Wikipedia.org/wiki/List_of_LTE_networks

  https://en.Wikipedia.org/wiki/List_of_LTE_networks_in_Asia

• NB - 200 can not handle the compatibility mode for HDD Contoller...

  Hello everyone!
  I would like to make it work on my nb 200 ubuntu 10.04 netbook edition netbook. The installation is done, grub works very well (I kept windows xp and have dualboot grub-controlled). Of course, I asked first in the ubuntu forum to solve my problems. I thought it was done, but in fact it wasn't. See the ubuntu forum for more information: http://ubuntuforums.org/showpost.php?p=9346966&postcount=1
  Switch mode Compatible HARD disk (in bios) controller works great for ubuntu, but Windows XP have problems. XP is launched (I see the Welcome screen), but then the computer restarts. I updated the Bios to version 1.9 (02/2010), but this does not solve my problem.
  In the threat of ubuntu, a help very kin (darkod) says:
  + You can try, but if changing the controller type makes a difference, I'm not sure this will help. This seems not related to ubuntu. +
  + I'm surprised change compatible controller made XP no boot. If a hard drive is sata, you, instead, compatibility mode is required to even install XP because it does not include inside SATA drivers. +
  + I guess it depends how the manufacturer put the netbook. +

  Thanks in advance for your help.

  I tested the functionality of Windows XP Home edition on my Satellite with AHCI mode and if the WXP was preinstalled with the SATA mode enabled it will not work when the mode is replaced by the compatibility option. I get the blue screen every time if I want to start Windows XP Home edition.

  I think that you do need to make the decision. If you want to use both operating systems, I think you should change the AHCI mode to compatibility and reinstall Linux and Windows XP Home edition.
  Then it works well, but you will not have full disk under Windows XP Home edition as performance when you use the SATA mode.

• Stuck in night mode shift iOS 9.3

  Has anyone seen their device stuck in Night Shift mode? My iPad Air this morning did not return to normal. Tried to turn it back on quarter of night off and back but the only thing that would fix he had to power cycle the iPad.

  The only thing I did different was put in charge of the day iPad overnight.

  My iPad that air has also stayed in mode night after the time it is supposed to return to day mode. I got to spend with the button day/night mode on the control panel that "slides up" when you drag to the top of the bottom of the screen. But time isn't supposed to automatically turn off in the morning? For what other reason enter the time?

  Air IPad, iOS 9.3, WiFi only.

• Portege M200: the screen is blank when you switch to Tablet mode

  Hello.

  Have a problem with my Portege M200 and after hours of searching for a solution, I'm still at a complete loss as to how to fix it.

  Essentially, when you attempt to switch to Tablet mode - or if I press the button cover closed 'sensor' on the far right, which is essentially the same thing: the screen goes black.

  This means that I can not in tablet mode at all.

  What happens across multiple operating systems and will happen even before that an operating system has started. Of course, I checked that when in Windows, the option "When I close the lid" is set to do nothing and I even checked for any cable setting in bios but saw nothing relevant.

  As far as I know this has only started happening since I sent it for repair with toshiba a month or two back (motherboard has been replaced I think).

  No way to control it via software or am I'm going to have to send it for repair again?

  > Like as far as I know that this has only started happening since I sent for repair with Toshiba a couple months back (motherboard has been replaced I think). Anyway to control this via software or am I'm going to have to send it for repair again?

  You description, it looks more like a hardware problem as a problem of software because this happens before an operating system has started. That's why I would exclude a software problem.

  In your case I would recommend you to contact the ASP again and explain the whole situation with your laptop.

  Good luck

• Satellite P750 - wireless card does not work

  PSAY3A - 02q 001. Laptop is around the age of 20 months. Turned on this afternoon and the Wireless does not work. Atheros AR9002WB-1NG. Can't b on / off switch material. The switch will beep when pushed. Network troubleshooting indicates the card is not activated. Card is always detected in windows.

  I feel that this indicates that the card has failed. Any thoughts?

  was soon Simon

  > Card is always detected in windows.
  Does that mean exactly?
  WLan is listed in Device Manager?
  And if SO, have you tried reinstalling the WLan driver again?

  If you tried that, do it!
  Uninstall the Wlan driver (in Device Manager), download the latest driver WLan driver Toshiba page, install the driver, reboot the laptop and try to set up the connection.

• Tecra 9000: Agere minPCI wireless network card does not work

  Hello

  I can't get my Toshiba Tecra 9000 to work with the Agere wireless Mini-PCI card.
  The Wifi card is 100% working since I've tested in Tecra 9000 my friend.
  The drivers are properly installed.

  But when I switch the equipment on the side of books, the led remains dark. In addition, Agere MiniPCI Wlan Card is not displayed in the XP Control Panel.

  All solutions?

  Tanks.

  > the Agere MiniPCI Wlan Card is not displayed in the XP Control Panel.
  And what is with the Device Manager? The card is listed there?

• Satellite A100 - Questions about slow start, not in the DMA mode CD drivers

  Hi all

  as you can see I have 3 questions:

  1. my Satellite A100-153 starts very slowly (current running avira antivir and sunbelt pfw only like on my other laptop which is older than this one, but not slow start)-anyone has any idea why (I would be very gratefull because I don't have reinstall win and all my stuff)?

  2 Nero tells me that my CD is not running in DMA mode - where can I check and fix this?

  3. drivers - am I forced the drivers supported on this site or can I use the drivers directly from the manufacturer (ATI for my graphics card, Intel for my chipset realtek for my sound and so on)?

  Help is welcome!

  Hello

  For me, it will be interesting to know what operating system you are using. Anyway, I'll try to give my short opinion on your questions:

  -many other factors may be responsible for slow start. It is usually the OS configuration. I'll try to find an interesting article, how to make faster starting and I will post it here for you.

  --entrer enter in the device IDE ATA/ATAPI controllers Manager, enter the properties for secondary IDE chanel and open the Advanced Settings tab. Is under transfer mode DMA if available? If this isn't the case, set it to please and after reboot check if the problem persists. DMA if available is usually defined as a default value.

  -In general, you can use it but it is well known that manufacturers of graphics card don't support mobile graphics cards and laptop manufacturers are responsible for.

  I recommend you to use the Toshiba drivers only. All of these drivers are put to the test.

  Good bye

• Satellite L100: Wireless network card does not recognize media

  I bought a Wifi (Gigabyte gn-wi01gs) to my L100, but this card does not work. I installed all the drivers, but it does not recognize any network. No other computer has a problem.

  This shows that, when I press Fn + F8 "wireless communication is disabled. Please activate the wireless communication switch "." What 'switch '? There is no switch!
  What should I do?

  Someone mentioned here in the forum that with the version of the BIOS under 2.10, the Wireless LAN card is unable to get a correct IP address of the connected Access Point or it is impossible to get a connection point of access to all.
  Added the new BIOS that fixed a problem with the wireless LAN switch kill, the switch did not work properly.
  WLAN should be activated by pressing FN + F8.

  So please update the BIOS to Version 2.10 or higher, but don't forget to use the good BIOS and the correct procedure of updating the BIOS!
  Incorrect BIOS may damage the motherboard.