Carriage of large format HP officejet 7000 does not transfer to the center when lid lifted

Similar Questions

• OfficeJet 7000 does not recognize cartridges

  We have a large format inkjet Officejet 7000 which we use for about 1 year. We use an external ink tank system that has been working for several months OK. Last week, the printer was working fine, then all lights cartridge 4 began flashing at the same time. If I try utilities like printhead, cleaning, it says no cartridge are recognized.

  I have cleaned the printhead connections & reinstall the cartridges but no change.

  Any ideas how can I fix?

  PC is Win XP Pro SP2

  Printer using the network connection.

  We managed to solve this problem more or less by chance. While pushing the connections to the printhead what is dropped from the main tablecloth. After reconnected it the printer is now OK. I guess that the cable must be are detached but was still held by the connector & not in contact.

• Video OK but sound does not go to the TV when connected HDMI on HP Mini 311 with XP.

  Video OK, but the sound does not go to the TV when connected HDMI on HP Mini 311 with XP. Has anyone experienced and resloved this issue and can share with me.  The solutiuon provided in the manual does not seem to apply to the Mini 311 model that we use. Help, please.

  James,

  Visit this link,

  How to get his TV using HDMI cables?

• The mouse cursor does not appear on the center of the screen to start upward.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  Suggestions:

  Go to Safe Mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and selectSafe Mode with command prompt.

  1. in safe mode, please do a system restore. Choose the date where you did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. always in safe mode, do a check of the file system. See if file check will check for corrupted files and repair them.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Defender does not light in the center of the Action. I deleted Norton

  I have Windows 8, firewall, & cancelled Norton. I want to erase Norton. Windows Defender does not light in the center of the Action.

  Thank you in advance.

  If you turn your active antivirus protection on the Defender will run in this case too. I tried it on my Windows 8 Pro PC. I managed Antivirus and when I disable its protection active and turn the Defender Defender works with accuracy.

• Delete option does not appear in the list when I right click on any element

  Original title: Please help friends

  

  In my laptop remove option does not work...

  I m not to delete something which in my hard drive laptop because delete option does not appear in the list when I right click on any element...
  Also does not work with the button remove from my Matthew...
  It is the only work when I cut this point and stick to the desktop, now I can delete...
  I also try to install Windows again but the result is the same
  Please help friends if you can...
             
  Thanks in advance

  It is not working...

  I already tried...

  But now my problem has been solved...

• HP Officejet 6700 Premium: Scan function screen does not come to the top when selected

  After updating Windows 10, the scan function when selected in the application wizard does not come to the top. Installed the driver updated, no effect.

  Hello

  Thank you for using the forum.

  You have downloaded and installed the FULL features of HP software?

  Here is the link for convenience:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930O2

  We suggest that you uninstall the current drivers before reinstalling the software downloaded full of features.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

  The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

  Next time please indicate what opersting system you first use before describe you your problem.

  You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If for some reason it does not restore the Volume icon, then...

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

  2. for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  Then, follow the instructions from #5 to #9.
  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Go directly to the Option two

  9. to activate the Volume icon

  (A) click on the download button below to download the file below.

  Enable_Volume_Notification_Icon.reg

  then follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.

• Windows Media Player does not appear in the window when selected

  When you select Windows Media Player window does not appear, however, the 'media player logo' appears in the taskbar, including the thumbnail with my videos shown. When I click on the "logo media player" in the taskbar in the main window just flashes on the screen and does not remain.  Help would be appreciated

  Oscardog,

  I posted this article, assuming you had Windows 7 on your computer. My bad. Sorry about that!

  Make SFC scan and check if any system files are intact and fine.

  See http://support.microsoft.com/kb/929833

  In addition, create a new user and check the status.

• OfficeJet 4630 does not print on the network

  My printer print is no longer on a network connection, a USB connection. For example, when I try printer in MS Word, the menu of the printer displays "Unable connect", even though I'm perfectly connected to my printer. I've had this printer for about two months, and it has been the case for at least a month. I ran "HP print and scan doctor, and he tells me that there is a driver conflict, but whenever I reinstalled the driver and all software, he repeats the same error message. I also run the program of "troubleshooting HP Installation failure - network", but to no avail. My PC is connected to my router via an ethernet cable, and my printer is connected to my router via a wireless connection, note that I've never had this problem until recently. All reports that I printed state that there is no problem with the connection or the printer, the signal is excellent. I rebooted my router, I reinstalled, I restored default on my printer.

  Hello Adam_C,

  Welcome to the HP Forums! I understand your concerns with your Officejet 4630. I noticed that you have made some necessary troubleshooting steps, and you tried to plug a USB cord to test the connection.

  What is your operating system on your computer? Click here to read: Windows.

  Please follow these steps:

  First of all, to follow this entire document from HP on "Can't find printer" Error Message appears on the computer for a wireless network Installation. This does not include the software to uninstall/reinstall.

  If you get the same error after following all the steps in this document, please let me know.

  Also, I would like to add a port on your computer to a wireless network:

  (1) go to devices and printers on your computer
  (2) right click on your printer
  (3) select printer properties
  (4) select the ports tab at the top
  5) click on add port, select Standard TCP/IP port, and then select new port
  (6) type your IP address of your printer, click Next, and then finish
  (7) click on apply, then OK
  (8) try to print a document

  Impatience on your part.

• My Logitech extreme 3D pro joystick does not work with the dogfight when played on vista Simulator.

  Why can I not get my joystick works when you play the air combat Simulator?  I'm under the it on my laptop with vista.  The game installs fine, but I don't get a response when I use the joystick which is a Logitech extreme 3D pro.  I go into the settings to calibrate it and it shows that it is there and it tests fine but it still fails.  I thought it was just the joystick, but it works with the microsoft x Flight Simulator.  Then I tried to install the joystick Saitek initially, I used to play the game with and got the same answer, it would not work and settings would recognize the control stick and he would test well but still does not work.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  It seems that the joystick drivers are not updated for windows Vista.

  Try to access the link below and install the gamepad for vista drivers and install the same as an administrator.

  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, en? DiSo = 13

  If this does not work, try to contact Logitech and check if they have updates on this for Vista.

  Follow the link below for more information.

  Combat Flight Simulator 3: how to troubleshoot joystick

  http://support.Microsoft.com/kb/811463

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• T60 RANDOMLY does not connect to the internet when you start

  One fine day this machine just stopped to connect to the Internet, either wired or wireless. I think it was a windows XP update that caused the problem

  Made it work again by loading the updated drivers:

  1.60 power management

  HotKey features - forget press release #, but he was later

  Login to 5.62

  Where possible I have uninstalled these files before installing the new versions

  Reinstalled the NIC drivers, noting that the most recent driver wireless is a not supports the network card in my T60 and decommissioning accordingly by the .txt file that accompanied the latest version

  Everything works, sort of.

  But if I stop and then perform a boot cold it does not connect (wired or wireless). When this happens, you know because at startup login manager tells me it could not connect. If I do a reboot it will connect (99% of the time).

  I can close the lid and go in standby mode (hibernation is disabled) and when he returns he will connect (if it linked before)

  And then sometimes even on a reboot it connects, but a subsequent reboot seems to work

  Any ideas?

  (1) what the order the drivers are loaded, and how I change that

  (2) could be a sign that the battery needs to be replaced?

  3) ??????

  Carlos

  Hi TmMny! Give a Kudo to Carlos! Click on the star to the left of his post.

  Carlos, if this really solves your problem, please click the "accept as Solution" at the bottom of your message.

  Thanks for finding this!

• Backup operation does not progress in the center of the Action.

  Original title: backup Windows 7 issue

  Windows 7 backup worked without interruption and the feature in the details of the center of maintenance/maintenance/Backup does not work, that is to say, manage space. What to do to fix this?

  Hello

  I suggest to create a new user account and then try to create a backup and check if it works.

  Create a user account: http://windows.microsoft.com/en-US/windows7/Create-a-user-account

  If create new allows user account, then he try the steps outlined in the following link to resolve the damaged user account.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope the information is useful.

• I can't right click on a file in my calendar!  In addition, my mouse arrow does not change between the different when selected tool icons.

  Just updated today (2015.1 Release - 9.1.0) PP and now I can't on the right, click on all files in my calendar.  My mouse icon is a permanent arrow as well and does not change when I select different tools.

  Any help would be appreciated!

  I had this problem for weeks and finally found an answer - for my system at least. (Mac Pro end of 2013, El Capitan 10.11.2)

  I am running PP on three monitors. I have the floating program on 1 monitor window.  If this window is bleeding in another monitor same 1 pixel when you work in the window of editing (on another monitor), make a right click does not work and tool icon does not change when you switch tools.

  This announcement just in case someone else is pulling their hair as I was!

• Photoshop elements 12 does not opens only the Center 80 to 90% of my photos from a camera Canon Powershot G15.  No way to cure it?

  *

  The operating system in Windows 7.

  I open the raw files in the raw converter of PSE 12.

  I resized photo in PSE of smaller size to make me see it whole frame located in the raw converter of PSE.  It does not agree.  I think I lose 5% of the original image on each edge.

  I open the raw files in PSE 12 of my Canon EOS T2i and I can see the whole photo in the raw converter.  No loss on the edges.

  I also loaded the raw converter supplied by Canon with the G15 camera.  Although I did not to one more than the small thumbnail views, it seems white lines on the long edges of the frames.  I suspect that the Canon converter will seize no more than the original photo.

  I can see the whole photo in the Picasa Viewer and have obtained jpg files with the whole picture using Picasa edit.

  There seems to be something on the files generated by the G15 camera that is causing this problem...