CASE managed subnet and mapping vlan

Similar Questions

• Case management support team

  I have a Pavilion p7 - 1520t which began randomly freezing under warranty. I sent in to service center twice for repair. The first time they replaced the motherboard but the problem of gel has continued. The second time they replaced the hard drive and when I got it back I couldn't even get past the start screen because it froze instantly. Now they hit my problem until {deleted personal information} case management team, and that's where nothing happens. At first, I was told to call the service center who performed the repairs, but I am not getting any return calls. Now, the team doesn't seem to know what to do with me. They don't return emails, and although I received a return call, I was at work and could not take the call. I asked that they send me an email with what are the options of this point and I get nothing.  I was buy nothing but products hp since my first computer back in the 90s and I've never had a problem with one of their products before. All I can say is I'm happy about that because the resolution of a problem with hp is hopeless. I don't know if anyone can help, but I have to try, I need this computer to work and I'm now seven weeks without her... What is the secret?

  27/08/13 - Jeff reached out to the customer

• Script to change the subnet and vlan.

  Hello

  Please can anyone help with a script to change the subnet and VLANs on all the esx host in a cluster for the vmotion and management network interface?

  Thank you

  Astra

  I guess it worked because you pasted an out front, so:

  Get-Cluster mycluster. Get-VMHost | Get-VMHostNetworkAdapter | where {$_.} PortGroupName - eq "VMotion"} | {} %
  Game-VMHostNetworkAdapter - VirtualNic $_ - IP $_. IP - subnet mask "255.255.254.0" - confirm: $false
  }

  I guess that makes still out:

  Get-Cluster mycluster. Get-VMHost | Get-VMHostNetworkAdapter | where {$_.} PortGroupName - eq "VMotion"}

  2 vmknis right?

  If Yes, then it should work I think.

• Mapping VLAN and probe Inline

  Hello

  I'm doing all my traffic flow of SSL VPN clients through a traffic Inline probe. From what I see, I should use the mapping feature VLAN. But I can't understand how the function works. ASA not very informative or extensive documentation.

  Currently my ASA has a network of interconnection on a VLAN to my router base, and all my internal network is routed to the base IP address. Default gateway of the router of my Core is the ASA. My ASA provides IP addresses to remote VPN SSL clients and is the default router for them. Remote traffic follows the remote client to the ASA, then through the interconnection to my internal networks. My only ASA works as my perimeter firewall and SSL VPN concentrator.

  I have map VLAN undestand will make all traffic from the remote clients to abandon the vehicle on a VLAN individual. So, I created a new VLAN and that added to a trunk on the SAA. Then I activated "restrict access to VLAN" and set it to my VIRTUAL LAN. My traffic Inline probe is connected to the VLAN and can provide DHCP.

  If it were a classic network, I'd Inline traffic probe the gateway by default for this VLAN and provide IP addresses and gateway with its DHCP server. But how does it work with ASA? I can in captivity the evacuation to this VLAN, but cannot find a way to make the traffic passes through the screen. As ASA does not support routing based on the source can't make the jump next to the probe traffic.

  I can do the bridge of the probe (L2) network for interconnection and the remote client VLAN. But the IP address of the ASA on the VLAN does not fall within the same range as the interconnection, so I can't understand if and how it worked.

  Can someone help me with the configuration or explaing me better how works the mapping VLAN?

  Thank you.

  What you are trying to reach is configurable through the "tunnel" default route, and it would force all traffic of VPN with this default route special.

  for example:

  If your traffic probe Inline between the ASA inside your heart and the interface, you can configure:

  Route inside 0.0.0.0 0.0.0.0 in tunnel

  Requiring all VPN traffic route to IP CORE that would go through your online traffic probe

  Here's the order for your info reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa83/command/reference/QR.html#wp1840612

  Hope that helps.

• Installation of vmotion when management network and vmotion are on different subnets

  I have vswitch0 which is located on the 172.18.9.x subnet and has my management interface with a gateway of 172.18.9.1 vkernal using 0 and 4 Teddy

  When I create vswitch2 which is on the 172.18.10.x subnet and is for vmotion using Teddy 1 and 5, but the front door must be 172.18.10.1

  It seems that I can have only a vkernal gateway. So I don't I get the vmotion switch to use a different gateway?

  These are my first boxes of ESXi and I've not enabled ssh, so I only have the vi client to configure with.

  You might have a network problem.  Have you tried with just a single teddy bear in the vswitch and used a cross on the cable?  Virtual LANs in use?

• Configuration of VLAN 6248 - link IP subnet to the VLAN

  We have 200 node network with no VLAN (small private company that developed quickly)

  All nodes / devices / etc. of PCs spread evenly over 6 Dell 5448 switches with no regard for the Department, location or usage.

  (1) L3 is 6248 - we've added 6248 route VLANs (everything is on VLAN 1 still - i.e. without marking)

  (2) L2 several VLANS by switch - the best of cases, 2 VLANS by 5448

  (3) trunk / general uplink L2 s 5448 using LAG (44, 45 ports) - should be labelled all traffic, but since it will be a conversion / migration on an e-commerce network 24 x 7, we thought that we would have to do uplink between 5548 s and 6248 General and changes to the trunk later

  (4) for the conversion, all uplinks of trunk/general will have several VLANs marked as vlan1 untagged traffic

  (5) we know fixed us every VLAN gateway IP to the IP address of 6248 maintenance the VLAN, but can't decide how to proceed with no one-to-one correspondence of VLAN LAG uplink

  Questions on 6248

  Q1: we would use "bind the IP subnet to the VLAN ' the 6248 to configure routing between VLANS or do we define the belonging to a VLAN by LAG?

  Q2: would we be able to ping the IP of the bridge VLAN configured in the 6248 a down host link / node / PC marked for the same VLAN?

  Any suggestions would be most appreciated.

  On the 6248 allowing to the VLAN routing you must just ensure each VLAN has an IP address assigned to it:

  Console (config) #interface vlan 5

  Console (config - vlan) #ip address 192.105.1.1 255.255.255.0

  Then enable routing on the switch:

  Console (config) #ip Routing

  That's all that needs to be configured on the 6248 for VLAN routing to work. One thing to take steps, is that on the 6248 the management VLAN is not routable. By default, the management VLAN is VLAN 1. Two options are to move the management VLAN a VLAN different:

  Console # configure

  Console (config) #ip address vlan 99

  Or not use VLAN 1 at all. Place traffic on other VLANs.

  The answer to your second question is Yes. With the VLAN routing enabled a customer to any what VLAN should be able to ping the gateway of the 6248.

  When it comes to generals and trunk mode. General mode is like a combination of access and trunk, you can send several VLANS not identified. General mode is most commonly used on the 6200 switches when connecting with the new switches, trunk sometimes doesn't connect when it is connected to a most recent switch. I suggest using the general mode on the 6248 and if it works, leave it in general mode.

  Here is a list of various white papers which all have some good info to have.

  http://en.community.Dell.com/TechCenter/networking/w/wiki/2580.networking-whitepapers.aspx

  6248 user's Guide

  FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/PowerConnect-6248_User%27s%20Guide2_en-us.PDF

  6248 cli guide

  FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/PowerConnect-6248_Reference%20Guide_en-us.PDF

  5548 user's Guide

  FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/PowerConnect-5524p_User%27s%20Guide_en-us.PDF

  5548 cli guide

  FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/PowerConnect-5524_Reference%20Guide_en-us.PDF

  Having to update firmware of the switch can help with interoperability.

  6248

  http://www.Dell.com/support/home/us/en/04/product-support/product/PowerConnect-6248/drivers

  5548

  http://www.Dell.com/support/home/us/en/04/product-support/product/PowerConnect-5548/drivers

  See you soon

• Processing of the steps of 40 + "cases" manage subscriptions to e-mail group, desired look instead of single list column

  I am creating a custom subscription management page and have about 40 groups of emails I would like users to be able to manage their preferences on. I want to format e-mail groups box to check and be in more than one column instead of a long list.

  I am running into trouble. First, I brought in all the e-mail groups as single contact fields check box. This turns the page in a super long list of e-mail - not desirable groups. I can set up the processing steps so that it works to subscribe or unsubscribe to groups of e-mail users, however, I want to look more aesthetic where the e-mail group options would be in the columns.

  

  

  I am wanting a solution for the boxes of the e-mail group to fall into the columns. However, when I use the approach of adding a custom field group > > column three custom > > then download a list of all the e-mail groups, can't do the processing steps allowing subscribes and cancels his subscription. In the steps of treatment, that it looks like the entire entity boxes wants to correspond with the group just email. I need the solution allowing each group of e-mail under the boxes to be able to map to a different electronic group at Eloqua and SFDC.

  

  Can someone help me?

  I want to be able to have my email subscription group text boxes in a list of multi-coloumn aesthetic, instead of one single long list. It is essential that the solution still allows processing steps to unsubscribe or subscribe users to this group of specific coordination with the box e-mail they either checked or disabled.

  Here, the answer is in the code.  What you need to do is to use CSS to create fake columns in your layout.  So what you need is a container wrapped around your input box element (and label).  The necessary code is likely to vary, but the example of bootstrap below is a good reference to highlight the code.  In this case, the container with a 'field-group' class is used to contain the entire box input element.

  
   Email address
  
 

  In this example, the form-group class is what you want to style.  In the CSS, you will need to use the following text:

  . Form-group {width: 33%; float: left ;}}

  This style will cause the width of the form group confined to a fixed width of 33% and the left float attribute will allow the element to be removed from the flow of the document and create a type column in your page look.

• management network and vCenter

  Hello

  Should I put the vCenter on the same network as the hospitality of ESXi management?

  Now I have standard vSwitch0 configured with vmkernel port = vMotion vmkernel port = network management... im wondering if I should also create v vmnetwork for example the Mgmt network name as seen in the photo.

  

  I've never had problems, but I assume that from a security perspective, there is more to routed traffic otherwise on this subnet.  I have been a long time and never considered that it was essential.  In any way is ok, but I never ran on the management network and personally do not feel the need to put it out there.

  What happens if you have several subnets management? IE in my case that we have a different management of networks for some of our groups and therefore VCenter was impossible on both.  I'm surprised they put this in the documentation.

• RV082 multiple subnet and DHCP

  Hello

  I want installation 2 lans in my RV082:

  192.168.1.0

  and

  192.168.2.0

  My question is what happends as DHCP?

  I tested and it gives only IP via DHCP addresses in the 192.168.1.0 lan. What happens if I put a WRT54G2 DHCP service in the Lan 192.168.2.0 and connected to the RV082?

  So, in this case the multiple subnet are useful?

  Thank you very much

  Oliver

  In general: the RV082 is now part of Cisco Small Business, and you might want to ask your questions in the Cisco Business little community support for routers. You will find people from Cisco over there...

  It is my understanding that the function of multiple routers RV LAN subnet extends the NAT tables. By default, the router of RV will be only NAT for source from inside the LAN IP subnet IP addresses. If your router is equipped with the 192.168.1.1/255.255.255.0 by default then it will be only to do NAT for 192.168.1. * IP address, but not others. If you connect a different LAN (for example, 192.168.2.0/255.255.255.0) subnet across another router (the one without NAT) to your RV then the different LAN subnet would no internet because the RV does not know the LAN subnet and it doesn't NAT. basically the RV would send source IP addresses * 192.168.2 unchanged in the internet where they would quickly disappear. The function of multiple subnet allows you to say the RV that 192.168.2.0/255.255.255.0 is actually a subnet of your local network, routed and is supposed to happen by NAT.

• NAC managed subnets

  Hello

  I implement NAS OOB, L3, RIP. We use several sites with different subets on MPLS. for the configuration of subnets managed, must I enter all the subnets between all the remote location and the NAM?

  If you explain little more about subnets managed too, I'd be very appreciated.

  Thank you

  Alex

  Alex,

  Use static routes for the subnets of L3. Managed subnets are used for L2 adjacent subnets.

  More details here: http://tinyurl.com/yzd7v6c

  HTH,

  Faisal

• Publish everything by downloading the Patch 17767877 - Adaptive case management

  Hello

  We are working on the case of adaptive management (https://soacommunity.wordpress.com/2014/04/14/install-the-new-user-interface-for-oracle-case-management-11-1-1-7-by-dani... ). I am trying to download a set of patches ( Patch 17767877) for BPM Suite 11.1.1.7 with Adaptive case management User Interfaces, but it is asking password when downloading our Oracle support account. So could you please send me the password in order to download this Patch.

  Thank you

  Dharma

  You will have to reach out to the Oracle customer support to get it.

  Quick question, did you think to install "Patch 18072286: SOA BUNDLE PATCH 11.1." 1.7.3'?  This grouped patch includes ACM and all other patches and fixes delivered previously created for PS6 (11.1.1.7).

  Even if you have already installed the patches on your existing 11.1.1.7 environment, you will still be able to apply successfully the hotfix 18072286 on the top of your 11.1.1.7 environment.

  Dan

• Problem with had case management sample

  I'm getting the following exception when you run the sample case management GUI had and no cases are:
  
  Caused by: BPM-73004
  
  Impossible to find records in the table.
  Unable to find records in the table using the query select count (caseInstance) of cases such as caseInstance join caseInstance.caseHeader you join caseHeader caseInstance.caseTranslations you caseTranslations where (caseTranslations.locale =: locale) and exists (select caseStakeHolders from caseInstance.caseStakeHolders as caseStakeHolders join caseStakeHolders.caseStakeHolderMembers as caseStakeHolderMembers where ((caseStakeHolderMembers.stakeHolder =: deles de intervenants et caseStakeHolderMembers.stakeHolderType = 'USER') or (caseStakeHolderMembers.stakeHolder IN: stakeHolderAppRoleList and caseStakeHolderMembers.stakeHolderType = 'APPLICATION_ROLE') or (caseStakeHolderMembers.stakeHolder IN)) (((: stakeHolderGroupList and caseStakeHolderMembers.stakeHolderType = 'GROUP'))) order by caseInstance.caseHeader.caseNumber desc.
  System administrator to contact for assistance.
  
  I created using the delivered with the sample had following entry of the case load and can be seen in Enterprise Manager:
  
  < xmlns:soap: envelope soap "http://schemas.xmlsoap.org/soap/envelope/" = >
  < soap: Body >
  < ns1:startCaseInputMessage xmlns:ns1 = "http://xmlns.oracle.com/CaseService/types".
  xmlns:ns2 = "http://xmlns.oracle.com/bpm/case".
  xmlns:ext = "http://xmlns.oracle.com/bpm/case/metadata/extension" >
  < ns2:case xmlns:ns3 = "http://xmlns.oracle.com/bpm/case/metadata/extension" >
  < ns2: data >
  < ns3:documentation / >
  < ns2:id > < / ns2:id >
  < ns2:caseId > < / ns2:caseId >
  Booking of < ns2:name > < / ns2:name >
  < ns2:displayName > < / ns2:displayName >
  < ns2: data >
  < had: book xmlns: had = "http://xmlns.oracle.com/samples/casemgmt/EURent" >
  < had: id > < / had: id >
  < had: carType > COMPACT < / had: carType >
  < had: pickup > 2013 - 03 - 11 < / had: pickup >
  < had: drop-off > 2013 - 03 - 15 < / had: drop-off >
  < had: actualDropOff > < / had: actualDropOff >
  < had: totalCost > < / had: totalCost >
  < / had: booking >
  < / ns2: data >
  < ns2:updatedDate > < / ns2:updatedDate >
  < ns2:updatedBy > < / ns2:updatedBy >
  < ns2:updatedByDisplayName > < / ns2:updatedByDisplayName >
  < / ns2: data >
  < ns2: data >
  < ns3:documentation / >
  < ns2:id > < / ns2:id >
  < ns2:caseId > < / ns2:caseId >
  driver < ns2:name > < / ns2:name >
  < ns2:displayName > < / ns2:displayName >
  < ns2: data >
  < had: driver xmlns: had = "http://xmlns.oracle.com/samples/casemgmt/EURent" >
  < had: firstName > Susan < / had: firstName >
  < had: lastName > Richardson < / had: lastName >
  < had: licenseNumber > DL3455541 < / had: licenseNumber >
  < were: age > 30 < / had: age >
  < / had: driver >
  < / ns2: data >
  < ns2:updatedDate > < / ns2:updatedDate >
  < ns2:updatedBy > < / ns2:updatedBy >
  < ns2:updatedByDisplayName > < / ns2:updatedByDisplayName >
  < / ns2: data >
  < / ns2:case >
  < / ns1:startCaseInputMessage >
  < / soap: Body >
  < / envelope soap: >
  
  I checked DEV_SOAINFRA.cm_case_stake_holder_member and that you may have noticed that members of the stakeholders are met in this table. However, the table fields of record DEV_SOAINFRA.cm_case_stake_holder all have nulls with the exception of the field ID. Can I make the Exception, this seems to be the cause.
  
  How can I get DEV_SOAINFRA.cm_case_stake_holder table filled with non-null values when you create a case? Is there some configuration of the strategy required in Enterprise Manager?

  Finally got it working with the help of the Oracle:

  • Download the patch for 14791221
  • Unzip the hotfix into a temporary directory
  • Copy the patch - catalog_18499.xml and HLJ3.jar in utils/bsu/cache_dir under your House of BEA. For example, it will be/oracle/fmwhome/utils/bsu/cache_dir to BPM VirtualBox image
  • Change directory to/oracle/fmwhome/utils/bsu
  • Run. BSU.sh
  • This will launch the Smart Update application. Once it initializes, you should see the patch in the downloaded patch panel. Click the button in the column apply to apply the patch

  Restart the servers WLS

• There is a problem with Adobe Acrobat/Reader. If this is the case, please exit and try again. (0:104)

  There is a problem with Adobe Acrobat/Reader. If this is the case, please exit and try again. (0:104)

  I get this message when I try to open a PDF from a Web page link. When I open the task on the Applications tab Manager, I don't see that adobe Acrobat/Reader listed at all.

  How can I solve this problem?

  I can answer my own question.

  After typing "patch" and read a few threads, I found out how to fix it.

  http://forums.Adobe.com/message/4541936#4541936

• When I open FF I get 6 tabs open my homepage twice, FF starts Options page, manage synchronization and sign

  When I open FF I get 6 tabs open my homepage twice, FF starts Options page, manage synchronization and sign

  Check that you have not set multiple home pages.

  You can find the homepage here:

  • Tools > Options > general > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Firefox supports several home pages separated by ' |' symbol (pipe).

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• I have manually manage music and videos manaully just only manage videos. What should I do

  I have manually manage music and videos when I connect my iPhone to iTunes, but only manually managing videos. What can I do to fix this

  You use Apple music or iTunes game? With the iCloud music library active on the device, all your library is available and you choose what to download for use offline on the device itself.

  TT2