Case of assignment of event names

Hello

I would like to know if there is a convenient way to change the names of cases in a structure of the event or to identify cases in any other way.

The problem I'm facing: whenever I have have a structure of the event which has several cases who oversee multiple entries, each is not obvious at first sight is that a certain case. For example, I would cite a case in my structure of the event "refresh view" I know what he does and not what item of façade changes could run (cause should always be able to see this :-).

Any suggestions?

Best regards Florian

Florian.Ludwig wrote:

Thanks for any suggestions,

I already use only legends about the FP (reasons much IMHO desirable), and once your inside the case of the typedef enum'ed does a decent job of document in which case you

(although Randall is right - it is better here, especially when you're "ctrl-mouswheeling" through the case :-).

I just wanted there was some visible clues to the event structure of the menu drop down. The structure of the event I'm getting about 70 cases which some monitor more than 20 FP controls.

Scrolling is not practice it either - and Yes, there is a lot of space FP in a tab control.

It is also why events user would be too much work to do now to only a marginal improvement.

Best regards Florian

Have you considered an approach 'divide and conquer', by which I mean some of these events pushing down into a Subvi, which uses the dynamic event record to do the job?

Examples of things that can be pushed down are things like "Whn this button is clicked on this thing should be shown or hidden."

Ben

Tags: NI Software

Similar Questions

  • Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.2 locale ID: 1033

    I have a problem in my laptop,

    This is the detail of the problem.
    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.768.2
    Locale ID: 1033
    More information about the problem:
    BCCode: c000021a
    BCP1: FFFFF8A000099840
    BCP2: 0000000000000000
    BCP3: FFFFFFFFC0000001
    BCP4: 0000000000100620
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    Hello

    STOP: 0XC000021A

    Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
    (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

    Cause

    This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

    Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.


    Solve the problem

    Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

    Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

    If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

    Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

    Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

    STOP: 0XC000021A<-- read="" this="">
    * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

    -----------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
    above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
    repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
    discs of the machine system good cheap that you already own windows (you will need to reinstall
    If necessary). You can also repair disks on another computer.

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Windows 7 problem Event Name: BlueScreen__ OS Version: 6.1.7600.2.0.0.768.11__

    I get this error when you use the internet, the blue screen and it restarts. I checked and recontroler drivers please help.

    Thank you

    > Signing of the problem:
    > Problem event name: BlueScreen
    > OS Version: 6.1.7600.2.0.0.768.11
    > Locale ID: 1033
    >
    > More information about the problem:
    > BCCode: 19
    > BCP1: 00000020
    > BCP2: FDE42558
    > BCP3: FDE42588
    > BCP4: 4A0600AB
    > OS Version: 6_1_7600
    > Service Pack: 0_0
    > Product: 768_1
    >
    > Files helping to describe the problem:
    > C:\Windows\Minidump\090610-26566-01.dmp
    > C:\Windows\Temp\WER-33384-0.sysdata.xml
    >
    > Read our online privacy statement:
    > http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    >
    > If the online privacy statement is not available, please read our privacy
    > Statement offline:
    > C:\windows\system32\en-US\erofflps.txt
    >

    The minidump files show constantly the csrss.exe process break with a BAD_POOL_HEADER stop error (19) referencing the win32k.sys.

    It's probably another pilot, a third-party driver that is causing the problem.

    I would say, at this stage, to enable verifier against any non-Microsoft drivers to stress test them and try to eliminate a problematic driver:

    Start > type check in the search programs and files, then press 'Enter' > create standard settings > next > select the names of the drivers in the list > select all non-Microsoft drivers > finish

    Restart the computer.

    Continue to use the computer normally but if you have any available BSOD brand minidump files.

    If after the activation of the Verifier and restart the computer, you receive a BSOD on startup and cannot start Windows, restart the computer in "safe" mode, and follow these steps:

    Start > type check in the search programs and files, then press 'Enter' > delete existing settings > finish

    Restart the computer, log in Normal Mode and make available any resulting minidump file

    I would also say, before you enable Driver Verifier, to download, install, update and run (quick scan should be sufficient) Malwarebytes' Anti-Malware (free version), in the case of McAfee missing something:

    http://www.Malwarebytes.org/MBAM.php

  • Problem with MS flight Simulator & acceleration. __Problem signature: problem event name: BlueScreen__ OS Version: 6.1.7600.2.0.0.768.3__ locale ID: 1033

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: d1
    BCP1: FFFFF80003BA6F4A
    BCP2: 0000000000000002
    BCP3: 0000000000000008
    BCP4: FFFFF80003BA6F4A
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\061410-12448-01.dmp
    C:\Users\Joseph\AppData\Local\Temp\WER-21777-0.SysData.XML

    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104...MP;clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt

    Joseph Blair

    System Specs:
    Mobo: Asus P6x58d Premium
    Processor: Refrigerated by an Intel i7 980 x (4.5 oc) liquid
    6 GB of DD3 RAM
    Intel SSD boot drive 40 GB W7 Home
    2 x 300 GB WD Velociraptor (dedicated FSX drive)
    HIS ATI Radeon 5870 GPU (oc of factory)
    PSU Corsair TX950W (7 fans)
    NZXT fan controller
    Corsair 800 d case

    Hi Joseph,.

    (a) when exactly you get this error message?

    (b) was your game works well before?

    Error messages on blue screen are normally related to the material, the following steps are worth a try:

    Step 1: Disconnect all external devices (printers, scanner, USB(universal serial bus) readers, etc...) Except the keyboard and mouse, then do a test

    Step 2: Put the computer to clean and test start

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    If the problem persists, please download the dump on Sky Drive file and share the link with us for analysis

    SkyDrive.live.com

    Available at the location file

    C:\Windows\Minidump\061410-12448-01.dmp

    You might want to know

    How read partial memory dump files that Windows creates for debugging

    http://support.Microsoft.com/kb/315263

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • problem signature: problem event name: bluescreen: stop 0xA

    Problem event name: bluescreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 2057
    Additional information on the problem:
    BCCode: a
    BCP1: 000000F0
    BCP2: 0000001 B
    BCP3: 00000001
    BCP4: 836E75AE
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Hello

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top 3 methods (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------------

    BCCode: 0a 0x0000000A

    Check these KB

    Error message on a blue screen on a computer that is running Windows 7 or Windows Server
    2008 R2: "STOP: 0X0000000A"
    http://support.Microsoft.com/kb/979444

    Stop error message on a computer that is running Windows 7 or Windows Server 2008 R2 and
    who has the iSCSI storage: "0x0000000A"
    http://support.Microsoft.com/kb/979711

    Those and 5 other KB Articles are available
    http://support.Microsoft.com/search/default.aspx?mode=a&query=0x0000000A&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

    -----------------------------------

    BCCode: 0a 0x0000000A

    Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
    just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
    The video driver or something affecting it would be questionable.

    Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
    system manufacturer and device manufacturers sites.

    Below I'll post a generic bluescreen convenience store and in the next message how to upgrade
    drivers and BIOS as well as controls memory.

    -----------------------------------

    BCCode: 0a 0x0000000A

    Cause

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

    The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

    Solve the problem

    If a kernel debugger is available, get a stack trace.

    To resolve an error caused by the faulty device driver or service system, BIOS

    1. Restart your computer.
    2. Press F8 to character-based menu that displays the choice of operating system.
    3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

    To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

    1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
    2. Try disabling the cache in memory of the BIOS.
    3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
    4. Make sure that the latest Service Pack is installed.
    5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
    6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

    If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

    Comments

    Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

    BCCode: 0a 0x0000000A<-- read="" this="">
    * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

    ==================================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen
    of death "crashes and displays the information about all crashes in one
    Table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista (also Windows 7) Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

  • Problem event name: BlueScreen 0x3b

    original title: problem event name: BlueScreen___OS Version: 6.1.7600.2.0.0.256.1___Locale ID: 1033

    Hello!

    I have problems whit my OS. I did a fresh install of win 7 64 bit and new same problem.

    After 4-5 hours does not when I start the comp I always get blue screen MSG HELPPP

    Problem event name: BlueScreen

    The system version: 6.1.7600.2.0.0.256.1

    Locale ID: 1033

    More information about the problem:

    BCCode: 3B

    BCP1: 00000000C 0000005

    BCP2: FFFFF80002BDB4A1

    BCP3: FFFFF880059D2FC0

    BCP4: 0000000000000000

    OS version: 6_1_7600

    Service Pack: 0_0

    Product: 256_1

    Files helping to describe the problem:

    C:\Windows\Minidump\020911-27268-01.dmp

    C:\Users\Proba\AppData\Local\Temp\WER-38423-0.SysData.XML

    Read our privacy statement online:

     

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:

    C:\Windows\system32\en-US\erofflps.txt

    In the observer of blue screen it saids

    caused by the driver: ntoskrnl.exe

    caused by the address: ntoskrnl.exe + 70740

    Signature of the problem:

    Hi Jaaa,

    1. What is the number of brand and model of the PC?

    2. have you activated your Windows version?

    3. ensure that all external devices are connected to the system?

    Step 1:

    If this isn't the case, you can try to activate and validate the product.

    Check out the link:

    Activate Windows 7 on this computer

    http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

    Windows validation

    http://www.Microsoft.com/genuine/validate/validatenow.aspx

    Step 2:

    You can start the system in safe mode and check.

    See the link below:

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 3:

    You can also check in the manufacturer's Web site to see if you have updates available (Basic Input\Output System) BIOS. Log in the website to check the same.

    Note: the BIOS update can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Problem signature__Problem Event Name:_BlueScreen__OS Version:_6.0.6001.2.1.0.256.1____Locale ID:_1033____

    Signature of the problem
    Problem event name: BlueScreen
    OS version: 6.0.6001.2.1.0.256.1
    Locale ID: 1033

    Files helping to describe the problem (some files may be is no longer available)
    Mini090410 - 02.dmp
    SysData. XML
    Version.txt

    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    Additional information about the problem
    BCCode: 1000008e
    BCP1: C0000005
    BCP2: 81C61BD2
    BCP3: A11BDA44
    BCP4: 00000000
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 256_1
    Information about the server: af85b418-30e5-42eb-bbb4-92c486763481

    Hello

    You really need this post in Vista - Hardware Forum

    Pilots and answers - Vista - Hardware
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads?filter=answered

    =============================================================

    To troubleshoot try safe mode (repeatedly press F8 as you start) or boot with a Vista DVD.

    For troubleshooting see BlueScreens using BlueScreenView and MyEventViewer and other methods
    This thread.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    --------------------------------------------------------------------------------------------------------------

    Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="">
    * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens. (If necessary)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
    This would help. Such as ITC and 4 others entered at the bottom left. And another error
    information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows Media Center crashes _ problem event name: CLR20r3

    Hello

    When with media center with a xbox360 it will crash when trying to open the video, but will show and plays great photos, here is the info it gives me

    Description:
    Stopped working

    Signature of the problem:
    Problem event name: CLR20r3
    Signature of the problem 01: ehshell.exe
    Signature of the problem 02: 6.1.7600.16385
    Signature of the problem 03: 4a5bd053
    Signature of the problem 04: mscorlib
    Signature of the problem 05: 2.0.0.0
    Signature of the 06 problem: 4a27471d
    Signature of the 07:20 c 8 problem
    Signature of the 08:100 problem
    Signature of the problem 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
    The system version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033

    I saw this on the net but can't understand it and it seems there are many others who don't

    Help, please

    worked great and then not, didn't I know?

    Hi, thanks for the response.

    delete the file mcepg2-0. It was the only file of database in there. It certainly makes a difference to cause before the media library / Videos would not work on my computer

    Now this is the case, thank you, seen this fix on the web as well but really wanted to be certain before I deleted something important.

  • Computer starts but cannot access all programs, error "the APPCRASH event name.

    Original title: computer starts but can not access to all programs

    What is an APPCRASH problem event name?       or entry point setupapi-CM Get brother is not found in the CFGMGR32.dll dynamic link library.

    Hi Philippe,.

    Please contact Microsoft Community. I will surely help you with the resolution of this error on startup.

    APPCRASH is a term used by Windows for a crash of the application and is reported as "problem event name: APPCRASH", it will also contain information about the name of the program crashed.

    This problem might have occurred because of these reasons:

    1 conflict between third-party applications.

    2 virus.

    3 corrupt system files.

    Try the steps listed here and see if it helps:

    Method 1:
    I suggest to start the computer using safe mode and check if the problem occurs or not. If this isn't the case, I suggest you to put the computer in a clean boot state and check if it helps.

    Step 1:
    Start the computer in Mode safe. At the start of the computer Mode safe with the minimum set of drivers and files.
     
    Start your computer in safe mode.
    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2:
    If the issue happen not in Mode without failure, perform a clean boot and check. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

    How to perform a clean boot in Windows
    http://support.Microsoft.com/kb/929135/en-us

    Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

    Method 2:
    If the problem persists, I suggest you analyze your computer by using the Microsoft Safety scanner to make sure that the computer is virus-free. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:

    -The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    -If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

    Method 3:
    If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

    Use the System File Checker tool to repair missing or corrupted system files
    http://support.Microsoft.com/kb/929833/en-us

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Problem event name: screen, blue ID:1033 locale

    Hi all

    I just got a problem in my system (Windows 7). When I looked on the net, suddenly the hanging system and automatically turns off. After 30 seconds, it is still once restarted. I have the login in safe mode and check the reason for the question. It displays an error message as below.

    When the system hanged I was using Google crome, then I tried Internet explorer, I suspect not all restart, but sometimes system changes and going to normal after 30-40 seconds. I use Kaspersky antivirus update.

    Signature of the problem:

    Problem event name: BlueScreen

    The system version: 6.1.7600.2.0.0.256.1

    Locale ID: 1033

    More information about the problem:

    BCCode: 116

    BCP1: FFFFFA80019574E0

    BCP2: FFFFF88004627CB0

    BCP3: 000000000000000

    BCP4: 000000000000002

    OS version: 6_1_7600

    Service Pack: 0_0

    Product: 256_1

    Files helping to describe the problem:

    C:\Windows\Minidump\081313-15475-01.dmp

    C:\Users\Name\AppData\Local\Temp\WER-51745-0.SysData.XML

    Can someone help me to identify and correct the error.

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.
    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
    The procedure:
    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy (compress)
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
    Link to find out how to download below.
    To ensure the minidumps are enabled:
    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
    Please also run MSinfo32 and download the output as well.
    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    System specs are extremely useful then please include everything you know.

    Blue screen view and that crashed are often wrong and should only be used in case of emergency...

    You can learn more about BSOD here
    You will learn how to test your memory here 

  • Problem event name: SQL100MSI

    Hello

    I install to install tools for SQL Server, MS Sql server 2008R2 8.53.

    During installation I get the following:

    = error =.

    Description:

    SQL Server 2008 R2 Setup has encountered an error.

    Signature of the problem:

    Problem event name: SQL100MSI

    Signature of the problem 01: 10.50.1600.1

    Signature of the 02 problem: unknown

    Signature of the problem 03: SqlSupport.msi

    Signature of the problem 04: 0x162A16FE

    Signature of the 05: 0 x 3 problem

    Signature of the 06 problem: Install_SqlSupport

    OS version: 6.0.6001.2.1.0.400.8

    Locale ID: 1036

    More information about the problem:

    LCID: 1033

    = End of error message =.

    I tried to install the french language pack:

    Windows6. 1 KB974587-ia64-en - fr.exe

    Windows6. 1 KB974587 - x 64 - en - fr.exe

    configuration of the sign, but he can't see the thses files in this folder.

    Thanks for any help.

    I don't really understand what the problem you hit.

    Not being able to connect to the SQL Server database from the database server?

    SQL Server runs?

    You are able to start and log by using SQL Server Management Studio?

    BTW, you have not created a database again...

    In any case, PeopleTools connect to the SQL Server database through odbc using [dbserver] \SQL2008

  • Apex 4 plugin users with points event names in their

    Hello

    I am using the DHTML dialog box plug that has 2 user defined events:

    Open - dhtmldialog.open
    Close - dhtmldialog.close

    The problem that I've been seen who was dynamic actions assigned to a single event was triggered by these events (i.e. when the open dialog box one DA based on the close event triggered.)

    The generated code is this:
    {"triggeringElement":"#ModalWindow",
  "triggeringElementType":"JQUERY_SELECTOR",
  "bindType":"live",
  "bindEventType":"dhtmldialog.close.COM_ANKERPOORT_APEX_DHTML_DIALOG",
  actionList:[{"eventResult":true,"executeOnPageInit":false,"stopExecutionOnError":true,
                  "affectedRegionId":"R8025602360818692",
                    javascriptFunction:function (){ window.location.reload(true);},
                      "action":"NATIVE_JAVASCRIPT_CODE"}]},
    The DA has be triggered by the dhtmldialog.open.COM_ANKERPOORT_APEX_DHTML_DIALOGevent.

    After changing event names internal to dhtmldialog_open and dhtmldialog_close (replacing). by a _ the problem stopped.

    This means that only the first part of the name of the event (before the first dot) is taken into account to trigger the associated DAs? Is this a problem Apex or jQuery?

    Thank you
    Luis

    Hi Luis,.

    I can't test it now (I'm at the airport in London), but I guess that's a restriction of jQuery. jQuery uses the point to identify the namespace of an event. So everything that follows the first point is considered to be the name of the event space. Namespaces make it easy when the dissociation (all) the events that have been linked for a namespace. APEX namespaces automatically all events personalized to a plugin with the plugin internal name (replacing points with an underscore).

    Concerning
    Patrick
    -----------
    My Blog: http://www.inside-oracle-apex.com
    APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • get the current event (name) of a field - possible / how to?

    Hello

    I wonder if it is possible to get the name of a field as event:

    (form.pag1.mytextfield::enter - JavaScript, client)

    var eventname = this.MagicJSfunction();

    It is of course possible to get the current name of the event with:

    (form.pag1.mytextfield::enter - JavaScript, client)

    var eventname = event.name;

    It's a shame it's always = 'Focus' wherever I use it (form.pag1.mytextfield::ENTER - JavaScript, client) (form.pag1.mytextfield::EXIT - JavaScript, client)

    (form.pag1.mytextfield::enter - JavaScript, client)

    my_scripting_obj.my_set_design_function(this, eventname);

    Reason:

    I use to change the structure of a field in realtion to his event in my script object. By calling the function of my script object, I'd use some copy/paste.

    I have more than 120 field where this function must be called to enter and exit the event.

    Hello

    Does that help? http://assure.ly/h8ZLr5.

    In this case, I call the function entry and exit of the events of each field.

    Niall

  • Add the constant event name to FlowElementMouseEvent?

    I realize that the LinkElement will be sending, in most cases, up to six different events, using the same name defined in the MouseEvent event constants:

    * MouseEvent.CLICK
    * MouseEvent.MOUSE_DOWN
    * MouseEvent.MOUSE_OUT
    * MouseEvent.MOUSE_UP
    * MouseEvent.ROLL_OVER
    * MouseEvent.ROLL_OUT

    In the Flex IDE, the event metadata are interpreted and causes incorrect Eclipse code Council as event names do not exist as constants as all caps/line of underscores in the FlowElementMouseEvent.

    For example, if I have an instance of the item link and type ' linkElement.addEventListener (', once I typed the left paren, it triggers code completion that presents me with the following list of types of events possible to add listeners for these types of six events):

    * FlowElementMouseEvent.CLICK
    * FlowElementMouseEvent.MOUSE_DOWN
    * FlowElementMouseEvent.MOUSE_OUT
    * FlowElementMouseEvent.MOUSE_UP
    * FlowElementMouseEvent.ROLL_OVER
    * FlowElementMouseEvent.ROLL_OUT

    Picture 1.png

    Obviously, the use of one of those who will not compile.  I know that you use the same constant MouseEvent event name strings,

    but it would be really nice if you could add these strings as constants of FlowElementMouseEvent event as well!  It is confusing to some developers when it does not work as they expect.

    Thank you!

    Brent

    I filed a bug on the name constants.

    Richard

  • I can't open firefox. Here are the details of the problem. Problem event name: APPCRASH application name: firefox.exe Application Version: 23.0.1.4974 app

    Problem event name: APPCRASH

     Application Name:	firefox.exe
 Application Version:	23.0.1.4974
 Application Timestamp:	520bc252
 Fault Module Name:	ntdll.dll
 Fault Module Version:	6.0.6002.18881
 Fault Module Timestamp:	51da3e27
 Exception Code:	c0000005
 Exception Offset:	00066448
 OS Version:	6.0.6002.2.2.0.768.3
 Locale ID:	2057
 Additional Information 1:	bfef
 Additional Information 2:	e8adce1c2b9e7be834b4063ac3c53863
 Additional Information 3:	bfef
 Additional Information 4:	e8adce1c2b9e7be834b4063ac3c53863

    Read our privacy statement:

     http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

    See if you can locate the program that belongs to the bitguard dll and uninstall this program.

    This could also be a problem with the report of Trusteer

    Try to update or uninstall and reinstall Trusteer report and if that does not help then disable/stop the program for now.

    • Start menu > programs > Trusteer report > stop report

Maybe you are looking for