Case returns the error on the value of type (error-17308)
Hello
I have the following problem with TestStand: I use a sequence setting tension on an instrument. The first step in this sequence is to choose the instrument to define. It worked absolutely fine so far. Next, I added a tool to select (called 2602A here). Now, it always works for all instruments, but not for this one. I also tested the Select / Case regardless, he does the same. The error message indicates that the type of my value does not match the type expexted. Yet, the type, as defined in the parameters.instrument is good (see attached photo). I tried with/without reference: same behavior. I tried with/without check Type: same behavior.
Maybe I can specify that my instrument works very well, I tested the list of instructions under the indendently step case, without any difficulty.
Any idea? Thank you in advance.
TestStand:
TS engine f1 2010 SP1 (4.5.1.144)
4.5.1.134 sequence editor
LabVIEW:
Version 11.0.1f2
Hello
Looks like you do a comparison in the "select" for a string type as seen by the value, but the setting for the case is an assessment rather than a string of values to compare to and I can not make sense since he's looking for a game (chained a ternary operator) or returns - 1 - making in this case doesn't make no sense - do in the select to return whereby cases to go.
The step case type is more than a 1:1 comparison, however, you have already demonstrated, the case itself may be an expression - you must ensure that the expression is returned exactly the correct type, so-1 is not valid, but would be "-1".
Who is?
So I tried to replicate this - if I send a pure (as in "2604" string) number when I'm looking for Parameters.Instrument == "2604 A '? '" 2604 A': Parameters.Instrument == "2604 B"? "" 2604B ':-1
He then drops the default case.
If I switch 2604 'B' which then activates OK.
If I pass in "fred" which fails with the error since we were looking for - 1 because it is a number, it does not work.
If I replace the case expression with:
Parameters.Instrument == "2604 A '? '" 2604 A': Parameters.Instrument == "2604 B"? "" 2604-B ":"2604 A.
While expression first only returns a string, so you'll get to the channel currently selected string comparison AND if I get A 2604 or 2604 B then I get a return value that corresponds to the string passed, or get a string that does not match, so the case is not the right one.
So Don't pass return - 1 = return pass which is valid for this case, but do not match the incoming parameter.
Thank you
Sacha
Tags: NI Software
Similar Questions
-
Hello
When I try to install a trial like photoshop cs6 or master collection cs6 product, I get the error "Installer has not initialized. I used Adobe cleaner to remove all products cs6 and tried again, but no luck, same error.
I opened the log file and find this line:
[FATAL] Setup error - installation package C:\Users\moshe-a\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx.
Returns the value of pim_installPackage = - 1
No idea how to fix?
Thank you, Momu
start at the top and work your way down to apply applicable patches until your problem is solved.
If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
If your error is:
"Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.
first of all, rename folder OOBE OOBE.old.
to find the OOBE:
Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE
Win 32 bit OS: Program Files \Common Files\Adobe\OOBE
Mac os: HD > library > application support of > adobe > caps
Mac os: USER > library > application support of > adobe > OOB
If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
If you use an installation dvd:
Copy the contents of the drive in a desktop folder and install from this directory.
If you are using a mac:
1. try to create a new user account in Mac with administrator privileges.
2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the
3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.
4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.
5 restart the installation.
If everything is applicable above fails, check your Setup logs:
http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html
-
Returns the value of column line
Greetings! I currently have a request we will tell
SELECT value, period FROM MAS_CFUS_KEYACM_CONTROLDATA ORDER BY cf_keyword_ID
RESULTS
Period value
--------------------------
100.0002 1 JANUARY 14
-35.68 1 DECEMBER 14
-1943.67 NOVEMBER 1, 14
678.0013 OCTOBER 1, 14
This continues for about 15 results by cf_keyword_ID.
I'm looking to return the VALUE first in a new column called PREV1, the second value of PREV2, third in PREV3 and so on. The same goes for the dates. And all this for only the first 10 values of each cf_keyword_ID. Can anyone suggest the best way to achieve this?
Thank you!!
Hello
This is called pivoting. Because I don't have a copy of your table test, I'll use scott.emp to illustrate.
This shows the first 3 employees for each job, in order by hiredate, along with their hiredates:
WITH relevant_data AS
(
SELECT ename, job, hiredate
row_number () taken OVER (PARTITION OF work
ORDER BY hiredate
) AS r_num
FROM scott.emp
)
SELECT *.
OF relevant_data
PIVOT (MIN (ename) AS ename
MIN (hiredate) AS hiredate
FOR r_num (1, 2, 3)
)
ORDER BY job
;
Output:
WORK 1_ENAME 1_HIREDATE 2_ENAME 2_HIREDATE 3_ENAME 3_HIREDATE
--------- ---------- ----------- ---------- ----------- ---------- -----------
ANALYST FORD 3 December 1981 SCOTT April 19, 1987
The CLERK SMITH December 17, 1980, 3 December 1981 JAMES MILLER January 23, 1982
MANAGER JONES 2 April 1981 BLAKE 1 May 1981 CLARK June 9, 1981
PRESIDENT KING November 17, 1981
SELLER ALLEN 20 February 1981 WARD 22 February 1981 TURNER 08-Sep-1981
There are actually more than 3 SECRETARIES and SALESMEN. Which does not cause an error; the only first 3 are shown.
As you can see, having less of 3 does not cause any errors, either.
For more info on pivots, see the FAQ of the Forum:
Re: 4. How can I convert rows to columns?
I hope that answers your question.
If this isn't the case, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
Explain, using specific examples, how you get these results from these data.
If yod post rather a problem using scott.emp, then you need not display the sample data; just results and explanations.
Always say what version of Oracle you are using (for example, 11.2.0.2.0).
See the FAQ forum:
-
XML - ORA-19025: EXTRACTVALUE returns the value of a single node
Hello
I'm new to XML DB. Can someone help me with the below XML
I use the following XML... (I pasted a part only of it coz I need data only up to this article)
XML
--------------------
<? XML version = "1.0" encoding = "UTF-8"? > < SOAP - ENV:Envelope xmlns:SOAP - ENV = "http://schemas.xmlsoap.org/soap/envelope/" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-."
example"container ="http://www.w3.org/2001/XMLSchema"> < SOAP - ENV:Body >
< ns:PicklistWS_GetPicklistValues_Output xmlns:ns = "urn: crmondemand/ws/list dropdown /" >
< ListOfParentPicklistValue xmlns = "urn: / xml/crmondemand/list of choices" >
< ParentPicklistValue >
< language > ENU < / language >
< ParentFieldName > plProduct_Team < / ParentFieldName >
< ParentDisplayValue > Marketing On Demand < / ParentDisplayValue >
< ParentCode > Marketing On Demand < / ParentCode >
< Disabled > N < / disabled >
< ListOfPicklistValue >
< PicklistValue >
Escalation of OCP/SME < code > < code >
Escalation of OCP/SME < DisplayValue > < / DisplayValue >
< Disabled > N < / disabled >
< / PicklistValue >
< PicklistValue >
Ask fusion < code > < code >
Merge request < DisplayValue > < / DisplayValue >
< Disabled > N < / disabled >
< / PicklistValue >
Code
---------
SELECT distinct
EXTRACTVALUE (value (SR), ' / ParentPicklistValue/ListOfPicklistValue/PicklistValue/Code ','xmlns = "urn: / crmondemand/xml/list of choices"') AS display.
Return EXTRACTVALUE (value (SR),'/ ParentPicklistValue/ListOfPicklistValue/PicklistValue/DisplayValue ',' xmlns = "urn: / crmondemand/XML/picklist"'),.
EXTRACTVALUE (value (SR), '/ ParentPicklistValue/ParentDisplayValue','xmlns = "urn: / crmondemand/XML/picklist"') AS parent_display,
EXTRACTVALUE (value (SR), '/ ParentPicklistValue/ParentCode','xmlns = "urn: / crmondemand/XML/picklist"') AS parent_return
TABLE (XMLSEQUENCE ((EXCERPT)
WEB_SERVICE (' <? xml version = "1.0" encoding = "UTF - 8" standalone = "no"? > < envelope soap: xmlns:soap = "http://schemas.xmlsoap.org/soap/envelope/")
xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" container = "http://www.w3.org/2001/XMLSchema" >
< soap: Body >
< PicklistWS_GetPicklistValues_Input xmlns = "urn: crmondemand/ws/list dropdown /" >
Type < FieldName > < / FieldName >
Service request < RecordType > < / RecordType >
< / PicklistWS_GetPicklistValues_Input >
< / soap: Body >
"< / envelope soap: >.
(' document / urn: crmondemand/ws/list dropdown /: ' GetPicklistValues, Id_de_la_session).
"/: soap envelope / soap: Body / * / * / * ',' xmlns:soap ="(http://schemas.xmlsoap.org/soap/envelope/'))) SR "
ERROR
---------
ORA-19025: EXTRACTVALUE returns the value of a single node
UNDERSTANDING
---------------------------
As my Xpath only points until the node - ParentPicklistValue and not the child nodes under it. That's why, when I try to interview the child nodes - / ParentPicklistValue/ListOfPicklistValue/PicklistValue/Code, I get the error mentioned above.
REQUIREMENT
-----------------------
Can someone help me to receive the values of the mother and child values based on xml and query above.Hello
It's a classic ;)
You need a second XMLSequence who shreds the collection of PicklistValue in relational lines:
select extractvalue(value(sr2), '/PicklistValue/Code', 'xmlns="urn:/crmondemand/xml/picklist"') AS Display , extractvalue(value(sr2), '/PicklistValue/DisplayValue', 'xmlns="urn:/crmondemand/xml/picklist"') AS Return , extractvalue(value(sr1), '/ParentPicklistValue/ParentDisplayValue', 'xmlns="urn:/crmondemand/xml/picklist"') AS parent_display , extractvalue(value(sr1), '/ParentPicklistValue/ParentCode', 'xmlns="urn:/crmondemand/xml/picklist"') AS parent_return from table( xmlsequence( extract( WEB_SERVICE( ... ) , '/soap:Envelope/soap:Body/ns:PicklistWS_GetPicklistValues_Output/ListOfParentPicklistValue/ParentPicklistValue' , 'xmlns="urn:/crmondemand/xml/picklist" xmlns:ns="urn:crmondemand/ws/picklist/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"' ) ) ) sr1 , table( xmlsequence( extract( value(sr1) , '/ParentPicklistValue/ListOfPicklistValue/PicklistValue' , 'xmlns="urn:/crmondemand/xml/picklist"' ) ) ) sr2 ;
What is your version of the database BTW?
10.2 and upward, you can use the XMLTable. -
Mathmatical function to return the value in injectors
Hello
I have obliged. If value for ex Lake 4400000, he should return as 4.4millions even for billions.
is there an oracle function to return the value in this format. ???Hello
When I want to have a "readable" released in large numbers, I use to do the following:
Scott@my11g SQL>with t as ( 2 select 3456123456 n from dual 3 union all select 4567123 from dual 4 union all select 123465 from dual 5 ) 6 select n, case when n>1000000000 then trunc(n/1000000000,1)||' Billions' 7 when n>1000000 then trunc(n/1000000,1)||' Millions' 8 else to_char(n) end fmtn 9 from t ; N FMTN ---------- ------------------------------------------------- 3456123456 3.4 Billions 4567123 4.5 Millions 123465 123465
------
* + [change] + *.
Moreover, lakh [url http://en.wikipedia.org/wiki/Lakh] has no meaning outside of South Asia.
Especially for a French man like me, grown with [url http://en.wikipedia.org/wiki/International_System_of_Units] International system of units that is fighting against what I call "funky" measures empirical such miles, yards, feet, inches, just not multiple of 10³
Same billion mean differ depending on the country (see [url http://en.wikipedia.org/wiki/Long_and_short_scales] long and short scales)Just for "fun": [url http://articles.cnn.com/1999-09-30/tech/9909_30_mars.metric.02_1_climate-orbiter-spacecraft-team-metric-system?_s=PM:TECH] this is what can happen when we do not use the same system of units.
-
DICOM metadata - extractvalue returns the value of a single node
Hello
I have difficulties in getting the value of the objects with repeated elements. Specifically, I need to get the value of spacing of pixels in the following excerpt from xml.
Normally, I use the following query to get the value of spacing of pixels:<DICOM_OBJECT> .. <DECIMAL_STRING tag="00181063" definer="DICOM" name="Frame Time" offset="900" length="2">0.0</DECIMAL_STRING> <CODE_STRING tag="0018106A" definer="DICOM" name="Synchronization Trigger" offset="910" length="10">NO TRIGGER</CODE_STRING> .. <DECIMAL_STRING tag="00280030" definer="DICOM" name="Pixel Spacing" offset="1660" length="22">0.003562</DECIMAL_STRING> <DECIMAL_STRING tag="00280030" definer="DICOM" name="Pixel Spacing" offset="1660" length="22">0.003562</DECIMAL_STRING> <UNSIGNED_SHORT tag="00280100" definer="DICOM" name="Bits Allocated" offset="1690" length="2">8</UNSIGNED_SHORT> <UNSIGNED_SHORT tag="00280101" definer="DICOM" name="Bits Stored" offset="1700" length="2">8</UNSIGNED_SHORT> .. </DICOM_OBJECT>
It works, but not when there are two elements. Then I get the error: "ORA-19025: EXTRACTVALUE returns the value of a single node.select EXTRACTVALUE(t.dicom.metadata ,'/DICOM_OBJECT/*[@name="Pixel Spacing"]' ,'xmlns=http://xmlns.oracle.com/ord/dicom/metadata_1_0') scale_factor from my_dicom_object t
All I really need is to get the value of the first node with the name of "spacing of pixels. Despite the many examples available to do with traditional xml paths, I was unable to find an example that makes using XPATH search strings rather than direct tag structure.
Can someone give an example?
Thank you!
Published by: rcdev on August 10, 2009 15:20All I really need is to get the value of the first node with the name of "spacing of pixels.
This? :
select EXTRACTVALUE(t.dicom.metadata ,'/DICOM_OBJECT/*[@name="Pixel Spacing"][1]' ,'xmlns=http://xmlns.oracle.com/ord/dicom/metadata_1_0') scale_factor from my_dicom_object t
-
Do stuff to PL/SQl that returns the value and redirect to modal page by setting this value
Hello
a button click Page1 I would perform a PL/SQL procedure that returns a value in P1_ITEMVAL and then redirect to a page 2 (modal page) and the value of an item on this page with the value previously returned. To do the same thing with a normal page is quite easy:
Button action is present, then process of PL/SQL that returns the value in the P1_ITEMVAL element and, finally, a branch at page 2 that sets P2_ITEMVAL with P1_ITEMVAL. I really have no idea how to do the same thing when the target is a modal page.
I created a unit test on https://apex.oracle.com/pls/apex (application 1554 - redir_to_modal)
Workspace: tests
USER: supporter
PWD: supporter1234
Any help would be much appreciated.
Kind regards
Pavel
Pavel
If you prepare a URL using the value calculated in the PLSQL of DA part you can then use a subsequent stage of javascript to set the location of the window.
This will jump to the top of the page of the modal dialog box
: P1_URL: = apex_util.prepare_url)
' f ? p ='|| : APP_ID - Application id
|': 2' - Page id
||': ' || : APP_SESSION - Session id
||':' -- Request
||':NO' -- Debug
: ': ' - Clear Cache
: ': ' - Settings
||' P2_ITEMVAL'
: ': ' - Parameter values
|| (: P1_ITEMVAL);
then in the action of javascript
Window.Location.Replace ($v ('P1_URL'));
Hope this is of some use
Concerning
Kelvin
-
How to return the value 0 for no data using the County?
Hi all
I used this query to count the number of records for each month of the year:
SELECT DISTINCT COUNT (I.information_sid) COUNT, TO_DATE (TO_CHAR (INSERT_DATE, 'MM'), 'MM') MONTH
INFORMATION I
TO_DATE GROUP (TO_CHAR (INSERT_DATE, 'MM'), 'MM')
ORDER BY TO_DATE (TO_CHAR (INSERT_DATE, 'MM'), 'MM')
But this code returns no value for months without data
I want to return the value '0' for any month of data. How, please?
Note: I use reports 6i.Maybe this?
SELECT SUM(CNT_REC) CNT_REC, MONTH FROM ( SELECT COUNT(I.information_sid) CNT_REC, TO_DATE(TO_CHAR(INSERT_DATE,'MM'),'MM') MONTH FROM INFORMATIONS I GROUP BY TO_DATE(TO_CHAR(INSERT_DATE,'MM'),'MM') UNION ALL SELECT 0, LPAD(ROWNUM,2,0) FROM ALL_OBJECTS WHERE ROWNUM <= 12 ) GROUP BY MONTH ORDER BY MONTH
No need to SEPARATE during the use of GROUP BY.
-Clément
-
Initializer for 'color': unable to analyze the value of type uint text "colorUint".
What is wrong with my code? I get this error:
Initializer for 'color': unable to analyze the value of type uint text "colorUint".
Code:
public static void convertStringToUint(value:String,_mask:String):uint
{
var colorString:String = "0 x" + value;
var colorUint:uint = mx.core.Singleton.getInstance("mx.styles::IStyleManager2").getColorName (colorString);
Return colorUint;
}
< s:Button id = "Battery" x = "10" y = "44" width = "60" height = "30" label = "Battery" fontSize = "10" color = "colorUint" / >-Data binding will not be able to detect assignments to "colorString".
Means that you must add [link] to the variable.
[Bindable] public var colorString:String;
Other issues, is that a chain is not a uint. A uint is a numeric value. So, after you have created your color of string value, you must typecast as a uint.
-
How to capture the value of type column report
It would be a great help that you might suggest the following
(i) Java script that I wrote on the standard status column (in a tabular report) fails.
This happens because of the standard status column, if I use the text field then called Javascript function and showing correct results.
Now, here, I want to know how to capture the value of the column standard report, since javascript fails due to
the column values of standard report unrecognized.
Example:
Columns of the report as a table:
```````````````````
Standard report column: salary
TextField report column: new treatment
Report column standards: difference
I've written the javascript on column New_salary function which returns the value of the salary column to calculate the difference.
For this column of report types, the javascript function does not work, that is to say, it does not show the difference., since it is not read
the value of the column Salary (which is the Standard type of report column)
Once I have change the Salary column to text (display as saved state) javascript field works fine.
All entries on how to capture the standard value of the column, so that I can access the value of the javascript function.
Thanks in advance
VijayHi Vijay - I had problems with the forum as well (and my workspace OTN so)!
You have two questions, I think.
First of all, that the old wage is not an input element, you can not get to it by referring to an ENTRY tag. you will need to change that to something like:
var s1 = d[k-1].firstChild.nodeValue;
This means that there is nothing else in the cell apart from the text - as in < td > < table > 123. If there is something else there that stops you getting the value using the above, you can go through these nested tags referring to objects further firstChild-
var s1 = d[k-1].firstChild.firstChild.nodeValue;
As I don't see your page, you need to check yourself to see firstChild how much you need. This example assumes that you had something like: < td > < b > 123 < /b > < table >
Second, the values of s and s1 are strings. You must convert these numbers to be able to perform calculations. You have two javascript functions to do this: ('string') parseFloat and parseInt ('string'). One contains decimals, the other is not - but know that one is not very accurate (it can change "123.456' in ' 123.455999999995' or something similar - not very good! '").
So, your calculation should be:
var diff = parseInt(s) - parseInt(s1);
Andy
-
Case in SQL condition does not return the values as expected
Hello gurus of PL/SQL,.
SELECT amd.brkr_nm, amd.brkr_sym, AMD.MINORITY_FLG, atdf.comm_brkr_dim_key, atdf.exec_brkr_dim_key,
WHEN atdf.COMM_BRKR_DIM_KEY = AMD.ACCESS_METHOD_DIM_KEY - CASE THEN
WHEN AMD BOX. MINORITY_FLG = 'Y' THEN
CASE WHEN atdf.EXEC_BRKR_DIM_KEY = atdf.COMM_BRKR_DIM_KEY THEN 'Done' ELSE 'InDirected.
END
ANOTHER "NA".
END
ELSE ' 0'
END
AS Direction_Method
Of
alloc_tran_det_fact atdf,
ACCESS_METHOD_DIM AMD
But it returns me the 0 value in the Direction_Method field. But when I checked the values in DB then my first condition (atdf.COMM_BRKR_DIM_KEY = AMD.ACCESS_METHOD_DIM_KEY)
second condition (AMD. MINORITY_FLG = 'Y') and third (atdf.EXEC_BRKR_DIM_KEY = atdf.COMM_BRKR_DIM_KEY) condition of all them have passed, then it should show the value as indicated, but it is shwoing the '0' value only in the Direction_Method column.
Kindly help me.. .am I missing something?
I use Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production. I can't create the test data in the database, I did not have the required privileges to make :(
Kindly help me, thnanks in advance for your time and your comments
Published by: user555994 on May 24, 2012 02:00could be a space or case (upper or lower case). Try:
/* Formatted on 2012/05/24 16:00 (Formatter Plus v4.8.8) */ SELECT amd.brkr_nm, amd.brkr_sym, amd.minority_flg, atdf.comm_brkr_dim_key, atdf.exec_brkr_dim_key, CASE WHEN trim(upper(atdf.comm_brkr_dim_key)) = trim(upper(amd.access_method_dim_key)) THEN CASE WHEN trim(upper(amd.minority_flg)) = 'Y' THEN CASE WHEN trim(upper(atdf.exec_brkr_dim_key)) = trim(upper(atdf.comm_brkr_dim_key)) THEN 'Directed' ELSE 'InDirected' END ELSE 'NA' END ELSE '0' END AS direction_method FROM alloc_tran_det_fact atdf, access_method_dim amd
-
DBMS_CRYPTO. HASH returns the value encrypted letters
Hi all
SE 12.1
I'm using dbms_crypto. Hash to encrypt the values. But encrypted the returned string is at the top of the case. Calling WebService Im externally requires the proper case... I've seen other ciphers (java-based) hash functions that seem to properly encrypt with a mixture of cases, what I need.
Is it possible to return the string that is encrypted in the proper case.
DECLARE
l_ccn_raw RAW (128);
BEGIN
l_ccn_raw: = utl_raw.cast_to_raw('1234');
l_ccn_raw: = dbms_crypto.hash (l_ccn_raw, dbms_crypto.hash_sh256);
dbms_output.put_line (' TOKEN: ' |) ( l_ccn_raw) ;
END;
You can always try dbms_output.put_line (' TOKEN: ': bass (l_ccn_raw));
But are you sure that you don't need a hashvalue base64-coded?
dbms_output.put_line (' TOKEN: ' | utl_raw.cast_to_varchar2 (utl_encode.base64_encode (l_ccn_raw)));
-
problem by returning the value of getChildByName
Hello world
I was faced with a big problem. I work in AS3 in which I wrote a file in which I appointed as cell.as (which extends from the cell as MovieClip) and I stated a user set a Boolean variable called startup: Boolean; and I wrote another as a file in which I referred this cell.as as newCell: new cell() and do a 5 x 5 grid. the problem is that whenever I traced the value, simply creating a new instance, say txt.text = (newCell.startUp) m:System.NET.SocketAddress.ToString (); (txt being textField), I get the value (true or false) according to my setting but if I when used the code as follows:
for (i = 1; i < = 5; i ++) {}
for (j = 1; j < = 5; j ++) {}
var newCell:cell = new cell(20,20,"newCell"+i+j);
newCell.name = "newCell" + i + i;
this.addChild (newCell);
If (I == 3 & & j == 2) {}
txt. Text = ((newCell.parent.getChildByName ("newCell" + i + j)) .startUp). ToString();
}
}
}
I got an error like: the use of the property undefined, start.
Why?
Is the return value of getChildByName () does not support any user defined properties (variables).
Any comments will be useful.
Kind regards
AlexsongetChildByName() returns a DisplayObject, who does not start field. You need to cast the object to the to use as a cell. for example:
var child: Object = newCell.parent.getChildByName("newCell"+i+j);
MyCell var: cell = cell (child); Cast
txt. Text = mycell.startUp.toString (); -
return the value in another field
Hi all. first I don't want anyone to laugh this is my 1st week with the 10g xe with application express 3.2
in any case, I have a question
I have 2 fields in a form that gets information from an another table (customers table) the first field is the name of the customer. which is easy I make a list of selection and display the value of the customer name and return the ID of the customer
now I have another field in the form which is the region of the customer. I would like to be automatically generated from the table to the customer based on its ID, we chose earlier and I don't want it to be editable manually by the user.
Please wait more stupid questions in the next 24 hours: DMr. brainwash.
Change your selection list to select using submit. This way when the value changes the page submit and information will be updated. Second, go to the properties of the item to your customer area and change the Source used to always substitute, the Source of the element of SQL query and finally in the value of the Source element, use a query that looks like this:
SELECT region -- region field FROM customers -- your customers table WHERE id = :P150_CUST_ID -- this would be the bind variable for your select list.
See you soon,.
Janet Tyson
-
sys_refcursor do not fetch any data, even if the query returns the value
I use sys_refcursor to return the columns and aid below the procedure to do. Although the data are there in table_1 and table_2.
PROCEDURE test_pro (abc_date N, DATE,
cur_get_data ON sys_refcursor
)
OPEN cur_get_data
for
Select A.col1, B.col2
from table_1 A
where A.dis_date = abc_date
left outer join
table_2 B
on
A.dis_date = B.dis_date;
IF cur_get_data % rowcount = 0
then
raise e_error;
END if;
EXCEPTION
When e_error
then
-no_data_found;
while others
then
-(giving an error with the SQL error code);
END test_pro;
When running under sql in the sql pl/sql developer window pick
data
Select A.col1, B.col2
from table_1 A
where A.dis_date = abc_date
left outer join
table_2 B
on
A.dis_date = B.dis_date;
But while testing the test_pro in the test of the pl/sql Developer window, it is
do not fetch all data and raise e_error every time
is there a problem arising from the use IF cur_get_data % rowcount = 0 whenever that happens in the exception block.
so can someone please put a few ideas what cud be the reason for this?PROCEDURE test_pro(abc_date IN DATE, cur_get_data OUT sys_refcursor ) is BEGIN OPEN cur_get_data for select A.col1,B.col2 from table_1 A where A.dis_date = abc_date left outer join table_2 B on A.dis_date = B.dis_date; /* while testing let exceptions just pop out EXCEPTION when no_data_found then ------no_data_found; when others then --------(giving SQL error with error code); */ END test_pro;
then you test as something like
declare my_date date := to_date('20120621','yyyymmdd'); my_cursor sys_refcursor; col1 ... ; col2 ... ; begin test_pro(my_date,my_cursor); loop fetch my_cursor into col1,col2; exit when my_cursor%notfound; dbms_output.put_line(col1 || ' ~ ' || col2); end loop; end;
Concerning
Etbin
Maybe you are looking for
-
Airport Express. Connect to a router home without another device from the airport.
Looking to buy an AirPort Express station. Plan to connect it to my home router to boost connecting devices and to create the network or guests. This work if I just plug my Express in the router with a cable Ethernet or you will take another product
-
executable file does not run subgroups
Hi all! I have to write a labview program that runs several screws according to what the user wants. Thus, in order to test different screws if something goes wrong, that I built a managed event structure with a controller of the tab. Each tab has a
-
My Acer desktop computer does not boot, the operating system is Vista Home Edition
It says Startup Repair is checking your system for problems. If problems are found Startup Repair will be correct automatically. Then he will say: the Startup Repair cannot repair this computer automatically. Send information about this problem And
-
How to delete the 2 files with expiration date 25/07/2014?
Found 2 records in history settings - display the files. type-txt doc. cannot delete I suppose that's the expiration date. How can I change the date? or y at - it another way to remove? Also have a damaged object - visualization of objects that I can
-
Hello I would like to configure the ASA for vpn only. By default, ASA allows traffic from the interface of high security to low security interface. I want to stop it. Is it possible to do without resorting to access lists. Thank you John