Caseback C655 15.6 fit model C665

I have a satellit c665 pro can't find a botom deal because it bur I can find deal bottoms for the c655 both are 15.6. On the photos, they are exactly the same. Can someone tell me if it will work.

Thank you

You know what: before making some confuse the closest contact Toshiba service and ask for help. They can help you with that and even order the new part if necessary.

Tags: Toshiba

Similar Questions

  • How can I change the variables in a fitting model?

    I use the VI of the restricted non-linear curve adjustment to adjust a non-linear curve and I use it in mode where provide you the reference to the VI to the fitting model. (Dark teal blue wired to the fitting vi)

    In my adjustment settings I n1 and d (refractive index and thickness), however, I also have settings that I would change my front panel such as the wavelength (lambda) and index of refraction n0 and n2 from the surrounding media. I just insert these values as constants before (laying down 1,519, etc.) but now I need to change them without having to rewrite the reference to the VI each time. How can I do this?

    Use the entrance of 'data' (on the top of the conpane but not identified in the contextual help window). This a Variant data type, so you can plug anything for her.  You can use a cluster or to cases where all the data are of the same type a table.  Use a cluster typedefed with named items and it becomes very easy to document what is happening in the IA function. Use the variant of the function given inside the function VI with a constant pile of typedef wired for the type of input data.

    Lynn

  • Sony Vaio 15 Fit model SVF152A29W low resolution of the screen

    Hello

    I bought a Sony Vaio Fit 15 model SVF152A29W and purchased by a dealer who sells only prepackaged laptops. Long story short when I used it, I found its resolution very low with maximum of 1366 X 786, now I cannot return this pc and really can not use a lot with this resolution.

    Can I change the screen full HD 1080? the graphics card will support it? is there a solution to this problem, thanks.

    Zgm

    Hi zgmi,

    Was not able to implement your model.  Can you please provide the number of series or series # better to help you with.  Once we are able to find the exact model, then we can verify that the specs of this device in order to better understand the problem of screen resolution.

    Nick-

  • Satellite C665-p5010 - no sound

    I have Toshiba Satellite c665-p5010, after installing the Audio driver, I can't hear the sound...

    The Audio driver is not installed correctly... .and I can't uninstall the Realtek Audio driver which is installed...

    Can you please tell me the right Audio driver for my laptop... I had installed Xp SP2 on my laptop.

    Hello

    > Audio driver is not installed properly... .and I can't uninstall the Realtek Audio driver which is installed...

    What card his cell phone does support?
    Check in the Device Manager in audio, video, and game controllers

    Is there a yellow exclamation?
    Did you check if the sound is not muted?

    I googled a bit, an it seems that the laptop belongs to the Asian series of Toshiba.
    I found the drivers here:
    http://www.Toshiba-India.com/laptop/DriversDetails.aspx?product=notebook%20Computer&se ries = Satellite & model = C665 & cat = Sound & os = 0

    It seems that various models support different sound chips so its important to know what sound chip this laptop supports.

    Moreover if just the audio driver has been installed, then the Device Manager may not contain no yellow exclamation or unknown devices.

    By the way: you can uninstall the audio driver in Device Manager

  • My keyboard backlight does not turn off

    I have a 15th fit model # SVF1532DCYW running Windows 8.1. The keyboard backlight active whenever I press a button any. I want to disable the backlight on the keyboard.

    I tried the method described in manaual and these forums using VAIO Control Center. Unlike the method described, there is * no * option ion VAIO Control Center affectig keypad or backlight. How do I turn it off?

    I will answqer my own question, in which case it might help others. To solve the problem, I uninstalled VAIO Control Center, then update the firmware, installed thenm Sony Shared Library, then reinstalled VAIO Control Center. After that, the option to turn off the backlight for the keyboard appeared in VAIO Control Center.

  • How can I printi exactly the size of my photos using printer wizard microsoft

    I'm usingt software Microsoft XP Pro, how can I print photos using Microsoft Wizard in their original or exact format?

    I'm usingt software Microsoft XP Pro, how can I print photos using Microsoft Wizard in their original or exact format?

    =========================================
    I guess just saying the pictures be cropped to fit
    models and prefer the full picture without worrying
    of the model.

    The free Picasa software has an option called "shrink to fit".
    allowing the photo full to print with no cropping.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Picasa
    http://Picasa.Google.com/
    (for Windows XP/Vista/7)

    A Google search will find a lot of tutorials Picasa...
    the following examples should help you get started.

    Picasa - print Photos at home
    http://support.Google.com/Picasa/bin/answer.py?hl=en&answer=11212&topic=1689809&ctx=topic

    Picasa - Installation Basics
    http://support.Google.com/Picasa/bin/answer.py?hl=en&answer=106563

    How to use Picasa
    http://www.WikiHow.com/use-Picasa

    Picasa Tip: Scanning old Photos
    http://picasatutorials.com/2009/01/Picasa-tip-scanning-old-photos/

    After you download and install Picasa...
    Open the program and double left click
    an image to open the editing functions.

    To add text to the front of the photo...
    choose... Simple retouching / text button...

    "Retouching" features: crop, add text, editing
    http://support.Google.com/Picasa/bin/answer.py?hl=en&answer=93403
    (More tutorials in the left column of this article)

    Picasa - legends of printing on photos
    http://picasatutorials.com/2012/04/printing-captions-on-pictures/

    Picasa - gift CD or DVD
    http://support.Google.com/Picasa/bin/answer.py?hl=en&answer=19583

    .

  • Non-linear curve fit the model of reference file

    Hello.

    I use the VI of the non-linear curve adjustment in order to adapt the data. The reference to the fitting VI model I use is included in the attachment. You can see that I have a few constant wireline, like 4, 2500 and 1. I want to do this constant variables I'll change before each curve corresponds, because actually in my problem this variables I know before the adjustment and they are constantly changing, and for the moment this made VI just to test.

    The problem I have is that I can't enter the values of this variable to my main VI, where I also call the VI was nonlinear. The scheme of connection of refernce VI made must be changed in order to be recognized by the VI was nonlinear. I tried to use a table to transfer variables, but if I use one, it recognizes the variables as parameters of editing and he's trying to install as well in the adjustment process, and it gives me erroneous results.

    Any ideas how I can add the values of variables?

    Thank you very much.

    Kind regards

    Nikola comedy

    To provide additional data randomly in VI of model, you must use the entrance of 'data' (it is a variant and so can contain anything you want!). Just create any type of data you want (generally a cluster if there are several values of different data types) that contains all the values, convert them to a Variant in the main VI and the variant of wire to crimp her. In the model, you convert the variant return to data, to the constant help of cluster, such as defined in the main as VI 'type' (simply right click cluster in the main VI... wire Create constant... move the constant in VI of model). Now, to unbundle the different values and use them anywhere inside your model.

  • How to shrink a picture to fit a model without losing the proportions of photos? When I pull the smaller image, it will lean or wide rather than staying the same but smaller...

    How to shrink a picture to fit a model without losing the proportions of photos? When I pull the smaller image, it will lean or wide rather than staying the same but smaller...

    Nice day!

    When turn you the image permanently the SHIFT key to keep the proportions or perhaps use file > Automate > Fit Image.

    Kind regards

    Pfaffenbichler

  • V DW3: Make a model that fits in a table cell?

    I have a long-standing website which has grown a lot over time. I have the "main Menu" on each page. whenever there is a change for her, I have to cut ' n paste it in all the pages and republish all pages.

    I created a template of main menu which is supposed to fit into a table cell on each page. However, when I "Edit/models/Apply template", it fills the entire width of the screen (it looks like the page of the entire model, not just the table wide 220px). This, of course, not what I need.

    I made the Menu in a library item and who does not work BUT this inserts them content of the library item every page I'm back to republish all the pages.

    Is there a way I can use a model so that I can change the main Menu and only need to republish the page template?

    You are welcome!  Good luck.

    Also, you might want to mark this question as answer while other similar issues can find more easily.

  • Satellite Pro M40 RAM fit laptop model L650?

    Hello

    I recently upgraded from my Satellite Pro M40 to a L650 because the M40 is dead.
    I was wondering if I could use the ram that I put in, in the L650?

    I'm guessing it will not, but thought I'd ask just in case.

    Thank you

    Sorry, but I don t know why this combination. Max RAM on M40 is 2x1GB and I think you're in L650 2x2gb. Right?

    It makes no sense to me.
    I put t know what L650 you have exactly, but some models can be upgraded up to 8 GB, so it will be better for you to upgrade with a 4 GB of RAM L650. Part number is PA3677U-1M4G.

    By the way: there are different bus clock etc new notebook you should only use modules compatible and faster.

  • HP Pavilion 500-056: what cd/dvd fits my model

    I think that my CD/DVD drive has gone wrong. How do I know what to replace it with.

    I tried to find a list of the parts for my model with no luck.

    HP Pavilion Desktop PC 500-056
    Product number: H5P75AAR #ABA

    Hello:

    Here is the link to the list of parts for your PC.

    http://PartSurfer.HP.com/search.aspx?SearchText=H5P75AAR

    The DVD player with the part number HP are under the heading of readers.

    575781 801DVD - 16 X R - Spd nLS JB ECO SMD

    HP spare is expensive ($104,83).  You can query by the part # on eBay and see what shows up.

    https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=1D1B7EB088E84786B61CD05ACD157CC5 & Searchin' = partnumber & SearchPN = 575781-801

  • what fits into this model Wireless lan card? HP Pavilion Slimline s5770t

    I have trouble with the installation of network card on this slimeline. I bought the normal lan card but I see just enough chipset installation n.

    or this computer does not support wireless?

    I bought this slimine 400-500bucks 2 years ago...

    This is such a lame...

    even I have an old computer, like 8 years ago has spot for the wireless card...

    Head first, welcome to the forum.

    You can buy a low-profile PCI Express x 1 wireless card.  It should break into your case.

    If your problem is solved, please click "accept as a Solution.

  • What does model no dvd player should I buy to fit inside my hp pavilion desktop a6244n?

    HP Pavilion a6224a, Visa Home Premium desktop computer. DVD drive TSSTCorp CDDVDW TS-H653N. (SATA)

    DVD/CD player will not read. System says it all right (this device does not work correctly. I already tried 15 different things. Deleted UPER and lower filters of the directory, HP scan of material, downloaded driver (said I have the current driver).

    I'm ready to replace the disk (I use it a lot, could be just dead) but I can't verify exactly which drive adapts to my PC. It is important while tray lines-up and sliding open correctly etc.

    DorieAZ,

    Regarding the a6244n HP, here's the upgrade and service Manual

    She is Frank swap-out.  Be sure to remove the old drive from the Device Manager.

    HP burner with lightscribe (IMHO caused my previous burner to fail)

    Sony burner w/o lightscribe

    Installation tips: install the drive, but do come back. Install the front cover (front cases). Then slide the drive forward and let the lock brackets to locking up.

  • What is the analysis of the chain model for "fits all"?

    Hello

    Using scan chain for a while, I know that %s corresponds only to chain up to white space. And I also thought % [^] matches everything, including spaces. But it turns out that it stops at the closing brace square.

    So what's the real scan pattern match everything including spaces?

    Want you that the Scan of chain at the end on?  Or are you typing just the rest of the chain?  If this is your scenario, then simply use the output 'remaining chain.  It might be useful to give a complete example of a normal input string and all WHAT you want as output.

  • Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

    QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

    I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

    Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

    I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

    I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

    Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

    But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

    QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

    Thank you hope that your next print job loose its staples.

    Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

    Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

    In response to your questions:

    1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
    2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
    3. Continue the first paragraph.

Maybe you are looking for