Cashback after 30 days is almost impossible

Similar Questions

• VI causes CPU load after several days of running

  Hello

  I have a strange problem. I have craeted a control test VI bench and it runs on five computers, five test of control systems. All PCs have almost the same hardware, same card mother, same processor, etc.

  Normally the CPU load is around 50% when I run the VI, but to a PC, CPU load goes up to 85% after several days (maybe a week) market continues and the PC is almost tied up - VI execution becomes very slow (10 times slower) and the mouse moves only very slowly.

  I have first thought that the PC has a problem, but the problem disappears as soon as I stop and restart the VI!

  I don't even have to put an end to LabVIEW - only my VI and then all is well again.

  The problem does not occur in the other four PC, but I can't say for sure.

  The Task Manager indicates that LabVIEW causes CPU - use swap file load is small.

  Is it possible to analyse the causes of high CPU load?

  I use LabVIEW 7.1 Professional

  Operating system: Win XP (SP 2 or 3 that I can't remember)

  P.S. I have no loops without waiting-functions.

  johanneshoer wrote:

  ...

  the PC where the problem is occurring only 2 x 512 GB RAM, others have 2 x 1 GB. Maybe I have the upgrade of RAM would be my first action...

  ...

  Assuming that it's a typo problem, is you have run out of memory physics and are returning to the virtual (which is 1000 X) slower than real memory.

  Christian has nailed.

  Ben

• What happens when you disable and remove iCloud library after 30 days?

  Hello Apple, so today I disabled and deleted iCloud library in my settings, I wanted to know if the application is deleted from your phone after 30 days, to take pictures with your camera what happens after 30 days, and if after 30 days you turn on iCloud Photo library of back?

  If you just stopped synchronization, photos should remain on the device. The 30 days, you mentioned is that if you remove the device. The application will remain even if you delete all the photos. If after 30 days you turn on synchronization, all photos will be synchronized.

• Time machine always fails after a day or two

  It is so incredibly boring, I can't understand what is happening.

  I have an of UDB external HARD drive that I use for time machine. All the time after a day or two of the race, he's going to say "time machine could not backup"Backup"" when I click on the flag for the information, it is said...

  "Unable to complete backup, an error occurred when creating the backup folder.

  Research online, I found to delete the .inprogress folder, but there is nothing here that named (I looked in fFinder and Terminal)

  When I look at the console it gives me this error:

  21/07/16 8:00:49.676 AM com.apple.backupd [21664]: error: (22) setxattr(2)) for key:com.apple.backupd.HostUUID path:/volumes/backup/backups.backupdb/jeff'aos MacBook Air size: 37

  21/07/16 8:00:49.677 AM com.apple.backupd [21664]: backup failed with error 2:2

  When I try to run disk utility it it fails, but the spectacle of newspapers is because he has failed to dismantle, if I try to unmount manually, it can not because it is currently in use.

  If I run 'sudo lsof - xf + d/Volumes/Backup /' I see this

  COMMAND PID USER FD TYPE SIZE/STOP NŒUD NOM_PERIPHERIQUE

  SDM 63 root DIR 21r 1.8 2 510 / Volumes / backup

  
  

  I've looked everywhere and I can't solve this problem on mine more, I spent hours and hours already

  Please take each of the following steps that you have not already tried until the problem is resolved.

  1. disconnect, then reconnect the drive.

  2. in the menu bar, select

  ▹ System Preferences Energy Saver power adapter ▹ ▹ 

  and uncheck the box marked

  Put the hard drives to sleep when possible

  If it is checked.

  Some external readers ignore setting the energy saver and turn down in any case. In this case, the drive to replace with another type, unless the manufacturer's website has a firmware update to fix the problem.

  3. If the player is connected to a hub, connect it to a port built into the computer. If it is already connected to a built-in port, and there is another such port, use.

  4. If the player has more than one deck (for example, FireWire and USB), try another.

  5. check the Web site of the provider of the car for an update of the firmware.

  6 contact the seller to see if there is a firmware setting, you can change.

  7. If you have installed the provider for the reader software, uninstall it.

  8. triple - click anywhere in the line below on this page to select this option:

  /Library/Preferences/com.apple.TimeMachine.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  in the context menu. A Finder window should open with a selected file. Copy the file to the desktop. Then he (the original, not the copy) move to the trash. You will be asked for your administrator password. Restart the computer and re-create your settings in the Time Machine preferences window. It will show you that you have no backups. Don't worry; which is expected. Perform a backup to test. The backup can take much longer than usual. If TM now works as expected, delete the file that you copied to the desktop.

  9. If none of the steps above resolves the problem, the drive may be defective. Try another. You may be able to save an external drive mechanism by installing it in a different pen.

• Photos of webcam remove after 28 days of my pic folder

  I take a lot of photos with my built-in webcam...
  When I take them it comes up with the snapshot and I close and they record on my folder of photos but they suppress the pictures automatically after 28 days.

  How can I change this?
  Should I move the photos to another folder? Rename them? I'm stuck.

  He deleted all 50 photos of me and my boyfriend so a little emptied and want to get this resolved as soon as POSSIBLE

  Any help appreciated :)
  x

  Hi LizziiJayne

  Which is really strange.
  I never had this problem, and I can't imagine that the image removes automatically after some time without warning or notification.

  Do you use 3rd third-party software or tools that would be to clean the operating system?

  Anyway, you can try to move the image to the second partition on the HARD drive.
  Create a folder on the second partition and move the photos here.
  In addition, I would recommend backup images on an external USB drive or HARD drive.

  Then test whether images would be deleted again.

• Deterioration of the system after 3 days

  Hey guys, I got this annoying problem with el capitan in my macbook pro 15 "2010, i5, ssd, fresh installation; He did all the updates and a few days ago I started having this problem of cycling: after 3 days of availability, with all works ok, regardless of the application you were using, some parts of the system are starting to freeze, so you could not open the FILE dialog box (which is part of the operating system independent of the application to use)... simple as that. even a browser such as firefox, the browser itself continues to work but if you try to save a page it frozes. When it happened he couldn't also use text editor, facetime, imessage... He keept Flash but never started. I tried with a lot of apps and it's the same thing. In this case, the only thing that worked for me was to restart OSX, which is not acceptable to me, because we cannot very often, it is not acceptable for a unix OS. The strange is that some system applications, such as finder, continues to work, but others, as cited previously, not more.

  I checked the RAM with MEMTEST and Apple hardware test modules, but there is no error; I thought that perhaps this problem could be the cause of errors in file system, when, at the time that the system needed to extract information from this dialog box (save, file...), in some sort could not read or access it from the file system; What do you think of this theory? My ssd is new and I've checked the permissions and the fact that I can to check its integrity, but I'm on el capitan, which seems to be a software utility disk with more limitations than the versions previous...

  In any case, I first run disk utility, reboot into recovery and frst help provided by the normal system; It gave me the error code 8 and fixed; but I started in recovery mode and ran again, and he has new found problems and that fixed it. but Frost guard happenning every 3 days, sort of; When I restart, everything supports to normal...

  A coleague told me I have to reinstall the system and restore everything by hand, do not use the backups time machine; I don't want to do that, but if needed I will; But first of all, I would like to know from you.

  Take the advice of your friend.

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Satellite C660 - battery is completely discharged after three days

  I c660-1te and the battery is completely discharged after three days when Notepad in * power off (NOT in standby or Hibernate) * State. I can't find any option "usb charge" in a bios to turn it off. Wake on LAN (WOL) feature is disable.

  I do not understand why battery life is so short?
  How can I control to turn off all devices on my laptop?

  Hello

  The WOL option should be disabled in Device Manager-> LAN card-> properties-> Advanced tab

  USB sleep and charge are in the utility of Toshiba HWSetup.
  Check all programs > Toshiba

  But it is available only if the laptop would support this function.

• Re: Satellite A300 15 days after 2 days not working anymore!

  I bought it in Greece, and after 2 days stopped working!
  I live in Brazil, so I left my laptop to fix, but I have to wait for 2 months, because they do not have the parts that are damaged!
  What to expect from a company that in 2 days the laptop no longer works!

  Hey Buddy

  I have a Toshiba laptop for 6 years and it worked without up to this problem.
  So I wonder what I should save more Toshiba ;)

  Your statement "What to expect of a company that in 2 days the laptop no longer works!" is really funny.
  Of course, I respect your opinion and I understand that you're frustrated, but you simply had no luck! Something like that can always happen...

  I guess that the A300 is new on the market and that is why the parts are not available and must be ordered by Aspa? ¦

  I wish you good luck.

• Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Hello

  The best way to save battery life is to go into the settings and turn off Apps Refresh

  I now get 3 / 4 hours of battery life more.

  You cannot return to a previous ios 9.1

  See you soon

  Brian

  PS

  If you still have a problem iCloud backup now

  Then restore settings to get rid of any bugs.

• mail does not remove the trash after 30 days selected in the preferences. Why?

  I selected emails in the trash in mail should be deleted after 30 days.  Messages in the trash are not deleted.  It started recently, after the upgrade to El Capitan.  Can someone help me?

  Same problem here. The e-mail rule--> accounts--> Expunge deleted e-mails after one day. week | month becomes active. I installed Spamsieve, but should not intervene. Someone suggested to delete the respective Mail.plists, but there is nothing else than com.apple.mail - shared.plist in ~/Library/preferences.

• Time Machine has not completed back upward after 4 days

  I'm using Time Machine (that I never liked).  I bought a new 27 "iMac and a 5 TB Seagate external hard drive.  I assigned the Seagate drive as the backup drive.  After 4 days, the wheel keeps spinning, but the backup of files are never finished.  I get no error message or indication of a problem.  Any ideas on what's going on?

  Format you the new hard drive (Mac OS X extended (journaled) and GUID partition scheme)?

  How the Seagate is attached to your iMac - USB, Thunderbolt or?

• creation of software version track Labview so works after 30 days

  I created the program using version trail OR labview software and the hardware I use is material NI Compact RIO. I build and created EXE file in the material Compact RIO now its fine work if after 30 days trail version is more to know if it works without any problem, because the software I use is a trail version.

  Interesting question.  I used executables compiled wide enough and even if it's not a direct response to your question, while I start writing the program on my computer with a license full and later compile it on this one, I often installed a copy of the trial on the computer on which the executable would be possibly used with what I could change and test the code out without having to hike in both sense as well to troubleshoot my programs and never later, I had a problem, and several times the program last record on the trial version until I copied it on my PC with the license to do the actual compilation of it.  This says I imagine there is a way they could include the expiration in the executable.  Generally for all the demos, there is a help file or the readme that explains the exact limits of the demo version.  I wouldn't really recommend based on what it is because you will not be able to go back and fix or change it later without a full version.

• deterministic segfault in DAQmx libs after 49 days of operations with 6110 OR Linux

  I have a program using a 6110 Council OR through 8.04 DAQmx Linux (Suse 11) of 32 bits. After 49 days of operation at 1 MHz (during which the program sometimes stopped and restarted), a segmentation fault occurs inside certain DAQmx libs, as follows:

   kernel: [4286583.578738] nimxs [940]: Segfault at 11 0053af14 sp 017d00a0 error ip 6 to libnidsadd.so [587000 + 37000]

  or

   kernel: [4286589.134512] nimxs [1134]: Segfault at 11 00561f14 sp 015970a 0 error ip 6 to libmxssvr.so [50d000 + 99000]

  It happened 4 times on two different machines, each time with the same availability of machine.

  After the segmentation fault, the cards can no longer be used and are not displayed in nilsdev.

  Is this a known problem of DAQmx on linux and is there a way to recover the other than restart error machine?

  ... and finally:

  before doing what I did in my last post (stopping services and unloading nation, then by restarting the services), restart the nimxs daemon with

  / usr/local/natinst/Max/sbin/nimxs /usr/local/natinst/max/libmxssvr.so

  does everything works again.

  (if the daemon restarts after modules are reloaded, cards OR do not appear with nilsdev but can not be used).

• Why the remote office after 120 days in server 2008 R2 disconect

  Why Remote Desktop disconnect after 120 days in server 2008 R2

  Hi SatpalSharma,

  Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the Site Web TechCenter for Windows Server.

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com