Cause green pixels in the clips "first elements.exe has stopped working error."

I have a PAL - jvc everio camcorder. I copied the files from the camcorder to my computer. My computer is running Vista SP1 with 2 GB of ram.

The files appear to be imported into PElements 4 However when playing or rendered clips I get an error first elements.exe adobe has stopped working.

I noticed that the clips have green pixels appear at the place where the PE crashes.  All the clips seem to have this problem.

I followed the suggestions of the basis of knowledge re: update codecs, disabling startup items, updated video driver.

I don't have the cyberlink software provided with the jvc. I bought elements of first as I had read that he would be able to read jvc files.

Someone at - it any other suggestions?

See this thread... same camcorder... same problem. There are a few things to try:

http://forums.Adobe.com/thread/389608?TSTART=0

Tags: Premiere

Similar Questions

  • "MessagingApp.exe has stopped working" error when I turn on the computer.

    In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

    original title: error MessagingApp.exe

    Hello McEvor,

    1. don't you make changes to the system before the show?

    2. Since when have you been faced with this problem?

    Try the following steps to try to get the fixed number.

    Step 1:

    Try to put the computer in a clean boot state to see if the same message appears

    A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

    http://support.Microsoft.com/kb/929135

    Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

    Step 2:
    An analysis of security and verification for infections.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    1. you can run a virus scan online from the link given below and check if the problem persists.

    Microsoft safety scanner

    2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

    If the problem persists, please contact support messenger yahoo from the link below for more support.

    http://help.Yahoo.com/l/us/Yahoo/helpcentral/

    Hope the helps of information provided.

  • I get the message AIOC. EXE has stopped working how to fix this

    How can I fix my system that aioc.exe has stopped working

    Hi Neil,

    Thanks for the reply.

    I need a little more information of the computer with the problem. Please help me answer the following questions:

    (1) what is the brand and model of the printer?

    (2) which toolbar is installed on your computer?

    (3) you are able to print after receiving the error message?

    (4) you have problems with the normally another impression of the toolbar?

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  • Whenever I restart my computer, I get the following message: PrinterSelect.exe has stopped working. Windows can check online for a solution to the problem.

    Description:
    Stopped working

    Signature of the problem:
    Problem event name: CLR20r3
    Signature of the problem 01: printerselect.exe
    Signature of the problem 02: 1.0.2453.22313
    Signature of the problem 03: 450fe152
    Signature of the problem 04: mscorlib
    Signature of the problem 05: 2.0.0.0
    Signature of the 06 problem: 4a7cd8f7
    Signature of the problem 07: e4
    Signature of the 08:10 problem
    Signature of the problem 09: System.Security.Security
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    To install a new all-in-one, I'm afraid that I will continue to have problems and the same error message.  Any help would be appreciated.

    Hi dtwes,

    try to stop the program from running at startup:

    Tutorial: http://www.vista4beginners.com/System-Configuration-Utility
    deselect 'printerselect.exe '.

    I hope this helps.

  • Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working.

    Original title: pamke.exe

    Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working. Can someone tell me please, what the heck is trunosc? I googled but no dice. Is there something wrong with my laptop? How can I fix? I'm kind of a perfectionist, and I'm tired of seeing it every day. Any help would be greatly appreciated. Thank you.

    Hello

    1. When did you start to question?

    2 did you recent hardware or changes to the software of the system?

    Method 1:

    You can perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    Method 2:

    You can also read the following article to run the Microsoft Safety Scanner and perform a full scan on your computer.

    Microsoft safety scanner

    Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

    Hope this information is useful.

  • Setup.exe has stopped working, try to install Allods Online, the new MMO

    I'm having a problem with my setup.exe Allods... I can't seem to run. It is said that setup.exe has stopped working
    a problem causing the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
    I tried to change the compatibility settings, I tried to run as administrator (Yes it's Vista! surprise...) and I tried the Msconfig.exe to fix.
    I'm desperate... It's the signature of the problem below. Signature of the problem
    Problem event name: APPCRASH
    Application name: setup.exe_unknown
    Application version: 0.0.0.0
    Application timestamp: 4a2ae2a2
    Fault Module name: RichEd20.dll
    Fault Module Version: 5.31.23.1228
    Timestamp of Module error: 4791 has 775
    Exception code: c0000005
    Exception offset: 0001e469
    OS version: 6.0.6001.2.1.0.768.2
    Locale ID: 1033
    Additional information 1: fd00
    More information 2: ea6f5fe8924aaa756324d57f87834160
    Additional information 3: fd00
    Additional information 4: ea6f5fe8924aaa756324d57f87834160

    Additional information about the problem
    Bucket ID: 1718522889

    Please just ask for more information.

    Check it again. http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Windows Vista Compatibility Center

    First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    If this is not Vista compatible, read the info on the link above.
    It works for some programs, but not all.

    This applies to software programs, NOT hardware drivers.

    If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe

    Run as Admin

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not fix it:

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    They will help you with your question in Forum Vista programs at the above address.

    See you soon.

    Mick Murphy - Microsoft partner

  • How to solve the questviewer.exe has stopped working windows 7

    How to solve the questviewer.exe has stopped working windows 7

    using the analysis

    http://www.Malwarebytes.org/

    Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

    Also look for viruses either using avast and spyware using superantispyware

    go to msconfig (type in the search box in startmenu or run in xp, and then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If it did then you know who caused the problem.

    you will also need to know is that "questviewer.exe"? It belongs to a program? If the answer is Yes try to update or reinstall the program, but before that make sure that the program is not hamful to your pc.

  • Open the folder "Images" = Windows Explorer has stopped working.

    Everytime I try to open my pictures folder after a few seconds, I get the message that Windows Explorer has stopped working. I can't understand how to solve this problem. = (If you please help.

    I ran the System File Checker and there find and repair corrupt files. However, the problem is still there.

    I also ran the disk check and has not helped either.

    Ok. I solved the problem by seeking advice in another thread. Here's what I did:

    I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).

    I'm moving all my pictures from external storage. Guess that's the motivation that I needed to finally get the prints and albums. :) I hope this helps someone else.

    Hello

    You can download this reg from my SkyDrive file:

    http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

    and double click on the file to import.

    When the Windows Explorer crashes, Windows Error Reporting Service [1] creates a dmp under C:\Localdumps. Please download the file to your public Skydrive folder [2] and post the link here. I take a look at the discharge with the debugger, maybe that I can see what Shell extension is the cause.

    André

    [1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx
    [2] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Adobe first Pro CC 2014.2 has stopped working error

    Hello guys,.

    Recently, I built a new computer with the following specifications:

    CPU: 4790 k (stock speed)

    RAM: Team Extreem 16 GB (2 x 8) (2400 mhz)

    Motherboard: Asus Ranger 7

    GPU: 780ti Zotac Amp Edition

    Storage: 250SSD Samsung evo + Barracuda 1 TB

    PSU: 850 G2 EVGA

    Operating system: Windows 7 Professional

    All the drivers are up to date.

    So I installed the creative cloud and then to install the applications in the following order: Media Encoder, Photoshop, and first Pro CC. The media and photoshop have no problem but first CC pro crashes when you click on.

    I would click on the first button CC pro and the loading screen pro first will pop up but then her 'has stopped working error' will occur immediately.

    I need to get this problem is resolved in the next few days because I need it for a very important video project. If this problem cannot be fixed in the next 2 days, unfortunately, I have to pay my subscription with adobe (still within 28 days) and use Cyberlink or Vegas.

    I have tried searching the forums and google but you have not found a solution that works for me. Could someone please lend a hand?

    Thanks for posting a screenshot of the Windows system information dialog box: StartMenu > Control Panel > system. (You can scramble all remove the computer, by domain name and workgroup down settings).

    A common cause of accidents involving the ImageRenderer.dll is not have Service Pack 1 installed for Windows 7.

  • get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

    When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

    Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

    Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

    This can be caused by the NVIDIA chipset driver:

    https://decibel.NI.com/content/message/46299?TSTART=-130

    Thank you
    Sacha

  • By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

    Bootstrapper.exe has stopped working!

    Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

    I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

    All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

    Thanking you in advance,

    stillcrazyat49

    Hello

    1. have you made changes to the computer recently?
    2. the program is already running while update you?
    3. where did you download this update?
     
     
    Method 1.
    I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
    May be a third party application is causing the conflict.

    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

    Method 2.
    If the problem persists, it is recommended to contact Garmin support and check.
    http://www.Garmin.com/Garmin/CMS/site/us/support/
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • GfxUI.exe has stopped working after rebooting the computer.

    Original title: error GfxUI.exe

    I've been running Vista business for a few years.  Last week, after the reboot, I get an error message that GfxUI.exe has stopped working.  After that I closed the error box, the PC works fine.  I updated the graphic driver Intel, but always the message.  Why now I get the message and how can I solve this problem?

    Hi Kea2300,

    Did you the latest changes on the system?

    This error message indicates to the Intel graphics driver.

    Because you tried to update the Intel graphics card, you can try to perform a clean boot and check if the problem persists.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    Hope this information is useful.

  • "Share" feature in the Finder (or other applications) has stopped working.

    Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share."  From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc.  He used to work.  Now it is not.  In system preferences > Extensions all the sharing options are regularly controlled.  The same problem occurs in other applications such as Photos.  Selection of a photo and trying to "share."  Nothing happens, the application crashes. Does anyone have a solution?

    The Share button shows 'No. Service' or missing menu items?

    https://support.Apple.com/en-us/HT203129

    If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.

    https://support.Apple.com/en-us/HT204904

  • Prefs in user.js for the Mozilla rich text editing has stopped working

    Prefs in user.js for the Mozilla rich text editing has stopped working. He worked, then stopped. you had to do system restore. user.js file replaced, does not work

    This has happened

    Don't know how many times

    solved with this

    https://addons.Mozilla.org/en-us/Firefox/addon/852/

  • The process Web Kit 2 Web, exe has stopped working? What is this and how do I get rid of him.

    Whenever I send an email that the warning box appears - WebKit2 process Web, exe has stopped working. I hit close program, then he gets me out of my Inbox.

    If I do not close the warning box my computer would you like s in limbo. What is is? It is not in my control panel and is not launched as program in my computer.
    Help?

    You will find support for Safari (browser) in this forum-online https://discussions.apple.com/community/mac_os/safari?categoryID=169

Maybe you are looking for