Causes OpenManage network do not mount at startup

Similar Questions

• Wireless network will not automatically connect at startup

  I have Windows 7 Professional.  Whenever I start, I have to click on the wireless icon & enter key code to connect to the net.  When I go to the Network & Sharing Center, active network shows.  When I go on manage wireless networks, active network are not.  When I try to add manually, I enter all the data, and then click Next, I get the notice that access is denied. I have admin rights.. Spoke people w/HP & router without result.  Just need to find the solution that will automatically connect to the internet to start without the need to enter the key code each time I start.  Would appreciate suggestions.

  Open research, open services of type "services.msc".
  Scroll down to "wlan auto config" right click, stop the service.

  Access
  "C:\ProgramData\Microsoft\Wlansvc\ Delete everything in this folder, leaving only a folder called 'profiles' delete everything in the folder"profiles"except for a folder called 'interfaces' delete all 'interfaces' file).

  Restart "wlan auto config" to connect to your wireless network, enter
  your password (make sure that the connection is automatically checked)
   
  Restart your computer to work, your computer will now connect to your network wireless automatically at startup.

• OpenManage Network Manager does not connect to

  I use the 5.1 openmanage Network Manager to manage the switches PowerConnect 7048.

  I am able to manage/monitor switches using SNMP without problems.

  However when I use telnet/ssh it keeps throwing errors saying "1 has failed to authenticate. Please click here for a list of devices that have failed. "trying to manage these devices by default".

  However the document says what needs to be written to the field ID to enable.

  I got it going!

  There was a problem with ssh on my switch. When activated it works now

• Windows Vista update will not install and causes cell phone restart. Laptop will not reboot and Startup Repair cannot fix the problem.

  Windows Update tried to install 4 days now. Every time he tries it tells me it failed and trying to install in manually. He said then the laptop restarts, but it does not start. Startup Repair tells me that it cannot solve the problems.
  I don't know how to go beyond this problem, can someone help me? I have no disk Vista as it came pre-installed on my laptop. Help, please!

  If your Vista is preinstalled, ANY support for your laptop is the manufacturer of the computer, not Microsoft.

  Try this:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not she, transfer your question in the appropriate Forum:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Network card not working plus-nouveau that bought now PC will not boot!

  Hello

  Mounted LAN realtek network card gave up the ghost so I bought this pci-e card on ebay.

  I installed it in each of the 3 slots of alternative but the PC will not boot with it in.

  This card is not compatible, or do I have to buy something else?

  Desktop HP Pavilion HPE h8-1070uk

  12 gig Ram

  Yes, exactly.

  Here is a link to many others...

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene & DEPA = 0 & Order = BESTMATCH & N = 100006519 & isNodeId = 1 & Description = USB + RJ - 45 + Network + adapt & x = 0 & y = 0

  I would like to know well why these PCIe NIC cards cause the PC does not start.

  People install PCIe firewire cards, cards network wireless, sound cards and all work fine, but .they wired NETWORK card doesn't seem to work.  Not every PC is but several.

  A lot of confusion.

• WD My Passport drive external drive will not mount once my Macbook Pro is already on

  Hello

  I actually had this problem for a year or two, but I'm finally getting bugged to this topic enough to see if it can be 'fixed '.

  I have a 2 to WD My Passport portable HD connected to my macbook pro via an external (wall outlet) powered TRUST 5 x USB3 Hub.  If everything is connected, when I start the macbook pro there is no problem and the WD My Passport is mounted in the finder.  But if I remove manually the hard drive and then try to mount it again while the macbook pro is running it doesn't mount not.  It used to, but he won't now.

  In the past the WD My passport would need to unplug and perhaps the USB3 hub would need power cable disconnect from him and the USB hubs out the macbook pro.  So when I joined this new and plugged the hard drive WD in the hub, it would rise very well.  But now it's just point blank refuses to ride until I restart the macbook pro.  Once I restart it it climbs perfectly and stays up forever--until it is dismantled manually - and then I have to restart the macbook pro again so he could mount once more.

  I tried all combinations of pull cables and adapters to power but nothing has worked.  After dismantling the WD hd and plug back on the USB3 light led on the hub hub lights up and the hard drive turns manually, but, as I say, it is not mount and it is not visible in disk utility.

  Any ideas please?  It's a bit annoying to have to keep restarting the mac whenever I had to unplug the hard drive WD.

  "As issued" WD Passport appear to cause a number of reports of trouble around here. You have already taken the first "not best" - using a powered hub. Just make sure that the hub is really power (lights on, for example). It could be that the external drive is in its death throws.

  This happen if the WD is the only thing on the powered hub?

  The Mac USB ports work with other devices?

  Here's what my experience with these things has believing me. WD made great bare discs, but I can't be so kind to their pens. Three questions:

  (1) I think that they should use chipsets which are not very easy to Mac.

  (2) most driving the ship formatted for Windows

  (3) even those shipped as "Mac editions have some odd which makes it difficult to access file formatting.

  If you do not have to share the drive with a Windows computer, you can reformat the drive and that often fixes "fail to mount/recognize" question. Disk utility is your tool of choice here because it is already installed on your Mac. Completely erase the WD drive by selecting the tab 'Clear' in the bar tabs to disk utility. Define the plan of Partition to GUID Partition map and journaled for Mac extended format. Press the button 'clear '. The reader will now will be rid of eccentric WD partitioning and formatting schemes and be a good Mac hard drive.

  If you share the road with a Windows computer, consider getting a better workout. After having fought external drives 'brand' on my computers and others that I maintain, I now use only boxes of other computer world with naked WD drives inside. Since this change, I have zero problems. For my MacBook Pro, I use this forum:

  https://eShop.MacSales.com/item/OWC/MEPMU3ES/

  I ordered the external power optionally for use at home and go on the road bus-powered. It's an empty envelope - just a hard drive of nu. They are more expensive than the stuff that Staples puts on sale every weekend, but are much more reliable. I ask the question. "What is my value data?"

• iPhone WiFi 6 causes of network disruption

  There is an old (locked) topic that seems similar unanswered: iPhone WiFi broken MacBook WIRELESS

  In our House, we have:

  -Airport Extreme (v2)

  -MacBook Pro

  -MacBook Air

  -iPhone 6

  -iPhone 6s

  -iPads

  We have noticed recently that our Internet connection was really inconsistent.  After some time, we have done tests and concluded that when my wife turned on the wifi of iPhone 6, all other devices would have connectivity problems (slow, fall of entry and exit, etc.).  Turn it off, all right, turn it back on, everything is twisted.  We tried to look to see if all the apps were using a lot of data (pictures just Google had destroyed our wireless bill, so we removed that, but even with that gone, the question remained), but nothing was.  But even if I do a huge download or download on my laptop it does not cause these same questions, it seems to be a problem of low level network and NOT only volume of use.  Even with the updated iOS (9.3.2), the problem persists.

  Are there known problems or patches (which I don't see Google search) about the interruption of network iPhone?

  I've seen this problem posted here before with no clear resolution. The one feature that might explain it is prioritization of media on a router. However here is a user points to the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Home network problem: 0 x 80070035: network path not found.

  I have problems with my home network; my laptop is unable to access the files on my HTPC

  More precisely:

  Laptops and PCs are running Windows 7 Ultimate. My laptop is connected to the home wireless network, the PC is connected through the LAN. Router is a Netgear DG834GV. Both computers have fixed IP addresses. They are part of the standard workgroup workgroup. There was formerly a group residential, put in place, which worked very well. We also have a Vista laptop that does all the unusual problems. Until a few days ago, the whole Setup worked perfectly. I could previously access/copy/distribute multimedia content, play on the PC via Zune music on my laptop and print from my laptop to the computer, but now I am unable to do one of these. The other laptop still works fine.
  From the network on the PC screen, I can see the files from the laptop and access.

  However, since the network on the computer screen laptop, I see the PC, but when I try to open it I get the error "Windows could not access \\MEDIACENTER. 0 x 80070035 the network path was not found. "I ping the PC with the IP address and name, and I can even remote to the computer desktop.

  ipconfig on the laptop did something funny...

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 139:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 143:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 140:

  ... up to 200. I can't that assume it goes back to #1 as well.

  After a few suggestions on here I just went through the enable netbios over TCP/IP, but now I can't see even the PC! Still can ping and access internet tho.

  Any suggestions as to what may be the cause?

  Here is the solution for "error code 0 x 80070035 network path not found" on Windows Vista and Windows 7 computers. Click on the button 'START', select 'CONTROL PANEL' and go to 'DEVICE MANAGER'. Click on "NETWORK CARDS", then click on 'VIEW' and select 'SHOW HIDDEN DEVICES'. In the expanded view, you will see a long list of numbered "MICROSOFT 6to4 ADAPTER". My Windows 7 Professional Office had 200 of them. Right click and select 'DELETE' on all but 1 of them. You can only do 1 at a time, so it takes some time. When you have only 1 left, restart the computer and enjoy being able to see the other computers on your network, including the RESIDENTIAL group files.

• A drive mapped on P to P does not load at startup upward.

  My question is similar, but may have a different answer.  I have a peer-to-peer network and my computer plays the main role.  In the morning he gets turned on first so that other computers can charge the player.  Some of my programs require that the mapped drive is the same on all computers like me.  The problem is that when I turn on my computer, it does not read the drive mapped on himself and he listed as disconnected.  I then manually go and plug.  Again, it is annoying more then anything.  Any suggestions?

  Hi Loreman,

   

  Thanks for posting your question in the Microsoft Community.

  From the descriptions of the question, it seems that mapped drive does not load at startup to the top.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  Follow the methods and mark the question below:

  Method 1:

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Method 2:

   

  Drive mapped to the network connection may be lost:

  http://support.Microsoft.com/kb/297684

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

   

• ORA-01507: database not mounted

  Hello

  It's 11.2.0.3 on Windows 2008,

  a node 3 RAC ASM.

  After restarting the server that hosts third instance,

  I have the following situation, everything is in place except the database

  on the third node in the database of node 1 and 2 is open, any other service is also running.

  crsctl res stat - you

  ORA.bigdb.db

  1 LINE intermediate bigdb3 dismantled, up in

  itiated

  2 bigdb2 open online

  3 bigdb1 open online

  When I try to query from the third node database, I got the message that the database is not mounted,

  C:\ > sqlplus / as sysdba

  SQL * more: Production of the version 11.2.0.3.0 on Mon Oct 26 15:47:25 2015

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With Real Application Clusters and Automatic Storage Management options

  SQL > select count (*) from the database of v$.

  Select count (*) from the database of v$

  *

  ERROR on line 1:

  ORA-01507: database not mounted

  Seems that there is nothing wrong when querying ASM instance on that node, all disks are mounted.

  C:\ > set ORACLE_SID = + ASM3

  
  

  C:\ > sqlplus / as sysasm

  SQL * more: Production of the version 11.2.0.3.0 on Mon Oct 26 15:49:51 2015

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With Real Application Clusters and Automatic Storage Management options

  SQL > select name, status from v$ asm_diskgroup;

  NAME STATE

  ------------------------------ -----------

  BOW MOUNTED

  MOUNTED CRS

  DG1 MOUNTED

  DG2 MOUNTED

  QG3 MOUNTED

  SQL >

  And it is of the Journal of the third instance alerts.

  ORA-00210: could not open the specified control file

  ORA-00202: control file: "+ ARC/control02.ctl".

  ORA-17503: ksfdopn:2 could not open the file + ARC/control02.ctl

  ORA-15001: diskgroup 'ARC' does not exist or is not mounted

  ORA-15077: could not locate instance ASM serving a required diskgroup

  ORA-00210: could not open the specified control file

  ORA-00202: control file: "+ DG3/bigdb/control01.ctl".

  ORA-17503: ksfdopn:2 could not open the file +DG3/bigdb/control01.ctl

  ORA-15001: diskgroup 'DG3' does not exist or is not mounted

  ORA-15077: could not locate instance ASM serving a required diskgroup

  ORA - 205 marked during: alter exclusive of installation of database...

  Please suggest what can be done to open the database of the third node.

  Thanks to all for trying to help.

  What I did then, it's a sign the db as sysdba on the third node,.

  immediate stop and then start.

  SQL > shutdown immediate;

  ORA-01507: database not mounted

  ORACLE instance stops.

  SQL >

  SQL >

  SQL >

  SQL >

  SQL > startup

  ORACLE instance started.

  System Global area 1.4531E + 10 bytes

  Bytes of size 2269104 fixed

  5905580112 variable size bytes

  Buffers data 8589934592 bytes

  Redo buffers 33673216 bytes

  Mounted database.

  Open database.

  It seems that it is a question of cluster, Oracle obivously (sometimes) will automatically start all resources, as is expected.

  I guess that Windows as operating system contributes significantly to the

• VSA and VSADs not mounted Manager time-out

  I have some problem in my VSA environment. The first problem is that I can't access the Manager of VSA vSphere client. When I click on the tab is present me with a message "loading" red the a 'loading takes longer than expected, if the cluster is on a network reconfiguration mode disconnect and reconnect' and then eventually times out saying "the VSA Cluster is unavailable connection timed out: connect.

  This brings me to my second question, which is the VSADs (two-node cluster) upward as inactive (not mounted) in vCenter. I can't ping the IP mount. However, I can ping the vCenter and two VSA management IP, as well as the IP Address of cluster service. However the management of the cluster (172.16.32.20) and NFS IP are not available.

  I lost power to my lab and things have not stopped correctly. Since I put under tension, it was unavailable. I've included the VSA Manager log.

  It seems to me the IP SAS is not. However, I do not know why?

  Any ideas would be great there are machines that I really want to revisit those NFS mounts.

  Hi Owen,.

  From the description you posted, it seems that either your cluster in maintenance mode or that there is something wrong with the backend network prevents the adjoining VSA VMs between them.

  You can check if the VSA VMS are in maintenance mode by using WSCli and getSvaServerInfo running. To do:

  Open a console session (command prompt) on the server where the VSA Manager is installed.

  Navigate to the directory that contains the file WSCLI.jar (C:\Program Files\VMware\Infrastructure\VSA Manager\tools\).

  Run: java-jar WSCLI.jar getSvaServerInfo

  Check the two VMS VSA. If they are both in maintenance mode, you can get them to come out of maintenance mode by running:

  java-jar WSCLI.jar exitMaintenanceMode

  Check the VMs got out of maintenance mode by running getSvaServerInfo again. With the two VM VSA out of maintenance mode, the address IP of Cluster should appear. Check if the cluster itself is in maintenance mode by running:

  java-jar WSCLI.jar getStorageCluster

  If the cluster is in maintenance mode, you can either take the cluster out of maintenance mode by running:

  java-jar WSCLI.jar exitStorageClusterMaintenanceMode

  Or, at this point, the VSA Manager must be able to connect to the Cluster and you can take the cluster out of maintenance via the user interface mode. Once this is done, your NFS shares must be online.

  In case the system VMs VSA are not in maintenance mode, there is probably a problem preventing the VSA VMs to communicate. Indeed, even if the VSA VMS are in maintenance mode, if there is a network problem, you won't be able to remove them from the maintenance mode. So, if the steps above fail, first step should probably be to check networking (necessity of VMs to communicate on networks of front and background).

• Error with the listener. ORA-00132: error of syntax or network name not resolved

  Hi all
  
  I get a strange error while trying to start the db.
  
  SQL > startup nomount
  ORA-01078: failure in the treatment of system settings
  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
  ORA-00132: error syntax or network name not resolved "LISTENER_TSS2A076N3."
  
  Listener is running.
  
  Here is my file Listener.
  
  listener.ora.tss2a119n1 # Network Configuration file: / oradb/oracle/product/asm /.
  11.1.0/network/admin/listener.ora.tss2a119n1
  # Generated by Oracle configuration tools.
  
  LISTENER_TSS2A076N3 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xx.xx.xxxx.net)(PORT =)
  (4329)(IP = FIRST))
  (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xxx.xx.xxxx.net)(PORT =)
  (4329)(IP = FIRST))
  )
  )
  
  SID_LIST_LISTENER_TSS2A076N3 =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = pnet01r_dgmgrl)
  (SID_NAME = pnet01r3)
  (ORACLE_HOME = oradb/oracle/product/db_1/11.1.0)
  )
  (SID_DESC =
  (SID_NAME = + ASM3)
  (ORACLE_HOME = oradb/oracle/product/asm/11.1.0)
  )
  )
  
  
  Well, I'm trying to install data guard and this error I get on the standby server. The listener preceding is also the same.
  
  Help, please.
  concerning

  I'm not very clear on that... Kindly explain... what exactly needs to add, delete or modify.

  Follow the link, it shows why and how LOCAL_LISTENER needs a specifications in the tnsnames.ora. You don't have a problem with the native listener.

  Werner

• Bluetooth network is not available

  Been trying for a while to use AirDrop on my MacBook Pro (Version OS X El Capitan 10.11.6) and my iPhone 6 s more.

  Just realized today that it might not work because the Bluetooth on the Pro does not work. With each device I try a pairing, it says that the network is not available and that I need to make sure that network access is enabled. Trying to do this, system preferences > network > Bluetooth PAN, I get the same message. I need you to ensure that network access is enabled.

  Someone else had this problem? Any ideas on how to solve it?

  Open system preferences > Bluetooth. Make sure that Bluetooth is enabled.

• sparsebundle disk image not mounting

  I've recently upgraded to Mac OS Sierra and now I can not mount an image of disk sparsebundle.

  I enter the password, and then nothing happens.

  I tried the same image on a Mac running Leopard and it opens fine.

  I tried a few other sparsebundle some and other encrypted disk images not. Some are open very well, but others do not.

  So, it doesn't seem to be a problem of sparsebundle encrypted disk image.

  Any suggestions?

  After investigation a little more the problem is Sophos AV

  Turn it off and the disk mount fine images.

  I hope this helps.

• EFI disk0s1 not mounted. screen shows gray with help file when I restart

  I had these problems with my recent Mac.

  1. it freezes for a few seconds. Then begins to work properly. And then freezes. The beachball keeps spinning and I can't access any of the applications.

  I tried restarting. But came up with another question. The gray screen of the charges and file aid continues to Flash.

  I tried from the recovery mode, but I get the Internet (OS X Lion). I'm under El Capitan. In disk utility, I check and repair the drive. Stop and try again. Now, there are two current icons and off - no logo entry sign and apple. If I'm lucky then after 40-50 seconds, Mac starts up.

  Now, I tried to make the EtreCheck, and he gave me more results for disc

  Disk information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 110,18 free) - 70 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS41N)

  
  

  That's what worry?

  
  

  What can I do to fix these problems?

  Disk0 unit 1 is not the problem. This is the EFI partition, which is never mounted, because it is used only by the bootstrapper, long before that the file system is initialized.

  Your problem is 70 errors in disk0 tranche 2, the volume Macintosh HD. This hard drive (the entire disc) was his. Dead. in ruins. You need a new drive.