Similar Questions

• Get error-200088 DAQmx reading (Analog DBL 1Chan 1Samp) .vi < add >...

  Hello

  I am using examples of labview and Labview 2011, I use the a sample.vi acq for the value of the voltage reading.

  but the thing is that I get the error of block then read this DAQmx Read (Analog DBL 1Chan 1Samp) .vi - 200088 ... And it's not indicate the correct voltage in labview.

  I also connected Multi meter with the analog card reader and multi meter gives the correct value, but it is not possible to achieve with labview.

  Please guide me how can I solve this problem which could be the reason for this.

  Thank you very much.

  
  

• How .vi DAQmx Read (analog 2D NChan DBL NSamp) to acquire continuous data?

  I try to get the .vi DAQmx Read (analog 2D NChan DBL NSamp) to acquire data continuously.  The 'help' indicates I need to wire the number of samples per channel-1, but it doesn't seem to work for my application.  If I have the wiring to any number greater than 0, the data collection works, but is not continuous.  I enclose the code (Sept15_MainPanel_WorkingBaselines_ApplyBaselines and Calibration.vi) and a Subvi (Collect_Baselines.vi) if someone wants to take a look.

  Here's what I'm trying to do:

  I use a unit NI USB-6009 to collect analog voltages of load cells 2 (channel 0 and channel 1) and 2 displacement transducers (channel 2 and 3).  The main panel of the VI contains a listbox with 4 options - 'Check EMG channel', "Collect base lines," "Collect Data" and "end of program".  'Collect base lines' 'End of program' work and I'm working on writing code to "Collect data".

  For the option "Basic collection", 2500 samples are read from 4 channels described above and 2500 samples are averaged.  This works.

  The option "Data collection" - I would like to that data from 4 channels to acquire permanently.  Finally, for the option of data collection, data acquisition stops when channel 0 detects the force of 200 N - so I will not always have a finite number of samples read.  The time it takes to reach the value of this force will be different for each test.

  -How can I get continuous samples for my 4 channel?  Is .vi DAQmx Read (analog 2D NChan DBL NSamp) function badly and if yes, what should I use?

  Thanks in advance for any ideas or advice.

  Esther

  First, in case 1, you need not the structure of flat sequence.  The son of the error and data properly will dictate the flow of execution.  Then, in State 2, you must initialize the shift register, unless you want to keep the data is accumulated each time that you run the vi.  The reason why you don't see all the data here is because you have - 1 wired for the number of samples per input channel.  You must connect a number here, even if you are taking continuous samples.  The service needs to know how much sample to gather at one time.  If you put-1 here, the number of samples per channel must be set up in the synchronization function DAQmx (sample clock).  If you specify a number here, then you put-1 in playback function.  The DAQ hardware will read continuously, you must retrieve the data from time to time, so you must specify the number of samples.  By reading inside a loop, it will continue to read until the stop function is encountered.  I guess that the Clear function acts as a stop.  But you must always indicate playback vi how many samples to read and return on each iteration of the loop.

  The documentation is a little misleading.  He warns that a - 1 will cause a continuous reading.  But the pads are so big, he can not read continuously forever without losing data.  If you specify a finite number, playback in a loop, and he will read this number and return the data (empty the internal buffer) at each iteration of the loop.  Continuous means that you just call the start function once.  He will read at each iteration of the loop until the stop function (or clear) is called.

  Here is the difference between the setting of the Timing DAQmx function for continuous or finished reading: finite samples requires a tenure, he reads the finite number of samples, and it's done.  It requires another start to read more data.  Continues to read requires only a start.  It still reads a finite number of samples, but when this is done, you can retrieve the data by calling the read function until he could continue.  After the reading, you don't have to call for new start.  Look at it this way.  Start is what starts the collection of data, not the read function.  Just read empty buffers in your data feed.  The data acquisition continues in continuous mode, but you must call read again to get the data on the pads.  If you specify basically buffer size when you set the number of samples per channel.

• Import MATLAB generated the file ascii in the Analog Waveform Editor

  Hi all

  I tried to create signals by the Analog Waveform Editor. I have some Waveform generated from MATLAB and recorded as ASCII files, following the instructions on this Web page OR, but it did not work properly. For example, if I produce a column to fill with 0.5 and import the file into the analog signal generator, all I get is a huge series of random number. I missed a few steps in the import of the waveform?

  Thank you!!

  Just for your reference, I could almost in half the size of your file just by saving as .hws. Also to answer your last point, you may have issues opening / importing your .txt file because it may have been opened in another program at the same time. Make sure that you have closed it in Notepad or Excel or other programs which may still be locking on the reference.

  Kind regards

  Jason L.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• 'write on worksheet' VI error: file already open

  I get this error when I write in a CSV file: I save data there permanently... Well, I programmed it stores about 100 points in memory and writes every 100 points.

  When I open the saved file in Notepad for example to preview, Labview returns error "File already open" and so he can't write.

  isn't this weird? aren't you just cached the file when opening information? How can I fix it?

  I use the VI "write on the worksheet.

  Thank you

  Maybe when you get the error, store what you were going to put in this file in memory or a temporary file.  Displays a dialog box that does not stop your program to tell people, don't not to open the file.  When your program detects the file is therefore more open giving the error, and then write about everything that you stored in the memory (or read about in the temp file and write) before adding the latest data to the file.

• Download XPsp3 error 'file corrupted '.

  I ran "SP3: <> http://www.microsoft.com/en-us/download/details.aspx?id=24 ' Microsoft Download site and saved on PC & tried to run. In both attempts, I got an error 'file corrupted '. Is there a suggestions on how to get the update of XP?

  It is reported that security software can inhibit successful installation of SP3. See...

  http://support.microsoft.com/kb/949377?

  Rather that to disable security software, uninstall may be a better choice because some 'disables' is not fully turns off. You already have the SP3 download then try this...

  • Make sure that you have the ability to re - install the security software (re - download or find installers, find a CD etc - also, to study the procedures for this with your provider support pages)
  • Disconnect from the internet
  • Uninstall your security software
  • Install SP3
  • Re-install security software
  • To connect to the internet and do Windows updates and software updates for security

  If you can't count on the possibility of re - install a security software for a reason any then just go with the neutralization of him while applying a SP3.

  You can also read this...

  http://support.Microsoft.com/kb/950717

  Tricky

• Updated MS page error: "files required to use Microsoft Update are longer registered or installed on your computer.

  Original title : Could not get the MS update or reinstalled is recorded on the XP Home SP3 machine

  Problem: MS page update error: "files required to use Microsoft Update are longer registered or installed on your computer.
  Now, I can't verify what has / has not been done!  Updates for years, now he did!

  Sort of bumped into a wall after trying a bunch of stuff. Here's what I've done so far:

  User login was Admin status for all activities tried & emumerees below, the various assignments of site Ms.

  Difficulty of test #1 (software installation)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to install it
  "c:\WindowsUpdateAgent30-x86.exe /wuforce".
  Installation failed with the error number after: 0x8024d007

  Difficulty of test #2 (registers dll files)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to register the dll
  DllRegisterSerer in c:\windows\system32\wuapi.dll failed. Return code is 0x80070005
  DllRegisterSerer to wuaueng1.dll succeeded
  DllRegisterSerer in successful c:\windows\system32\wuaueng.dll
  DllRegisterSerer in c:\windows\system32\dllcache\wucltui.dll succeeded
  DllRegisterSerer to successful wups2.dll
  DllRegisterSerer in c:\windows\system32\wups.dll succeeded
  DllRegisterSerer in successful wuweb.dll

  (checked the version of the file c:\windows\system32\wuapi.dll is 7.4.7600.226 in the system32 directory)

  Difficulty try #3 (MicrosoftFixit)
  MicrosoftFixit50597.msi--> ran, but he did not set

  Ran the Microsoft 1.0.3001.0 Security Scanner - nothing found

  A ran Malwarebytes Anti-Malware 1.61.0.1400 - no malicious items detected

  I have my "WindowsUpdate.log", but don't see a way of fixing here

  Help.

  Hi Dena. Thanks for check up.

  My machine now works. Here's what happened between my last post and the MS update feature works once more.

  I answered my own question about the SubInACL is allowed file to use on my machine. Googling it I found that it is a 'security descriptor and Editing Migration command-line tool' and that it would work on my XP Home edition. So I have done no harm. But he didn't explain why the machine does not respond to a stop command.

  So, with no harm done and an available restore point, I thought that I would see what the SubInACL program since the drive light was working but no message readable in detail until it was over.

  Googling the first line (echo off) in the batch file led me to a MS page that explains the function of command to echo. If I wanted to see out all I had to do was remove the echo off line. So I used Notepad to remove the line and saved the file. Re-run the bat file then produces a flow of lines in the cmd window - moving too fast to read. I got what I asked for but don't want that I really needed.

  Google "screen xp file output. The second Google result was a link to www.microsoft.com/resources/documentation , which explains how to redirect the output of a command file into a text file. So I followed the example and added a ">" and a unique filename at the end of each line. Worked like a charm. Weres big, very big files. All order lines have reported no failure except HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet which had modified 204160 entries and lines 901 has failed. Looking at a small sample of these faulty items, that they seem to belong to my McAfee AV, so I expect them to be special.

  A reboot of the machine successfully. Still didn't update.

  I ran the MicrosoftFixit program with no error reported.

  Rebooted and found the update feature works again. Cross my fingers batch of this next month of MS updates does not return this ghost.

  Hope someone can benefit from my experiences.

• When I started &#62; run &#62; ncpa.cpl I get message error "file does not have a program associated with it... »

  XP SP3 with ALL critical & almost all critics not updated.

  I'm trying to follow the instructions in MS Article 871122 OTF Windows to configure my wireless network settings.

  But when I try to... Start > run > ncpa.cpl I get message error "file doesn't have a program associated with it".

  Thank you

  Steve

  HDTV - calibration.com

  Ok.  That's what steps 1 and 2 of the instructions in KB 871122.  You are now up to step 3.

  Now we will solve the problem "file does not have a program associated with it".  Go tohttp://www.dougknox.com/xp/file_assoc.htm .  Read the explanatory text and then click the 5th from the top:CPL file Association Fix download the zip file, extract the reg file, then run it.

  Because this association should not have broken, I suggest that you download, update and run

  Malwarebytes Anti-Malware and

  SuperAntiSpyware

• Session state protection violation: this can be caused by manually editing the protected page P67_C point. If you don't know what caused this error.

  Hi friends,

  I create three field A textfield,textfield B,C textfield and apply the formula with dynamic action.

  C = A + B.

  Now, I want to protect user could not be total change at point C, so I change it is property of the text field to display only and change in

  Settings-> save the Session State-> Yes

  After all changes when I ran page and provide the registry then it shows me error below.

  Session state protection violation: this can be caused by manually editing the protected page P67_C point. If you don't know what caused this error, contact the administrator of the application for assistance.

  
  

  How to disable the total at point C when I use the dynamic action to calculate the Total of A + B.

  Thank you.

  
  

  
  

  
  

  Hi Maxence,

  1. in the case of a display one element

  Change your point of P67_C and change the State of Session Save-> No.

  2. in the case of a text field

  Change your point of P67_C and make it read-only

  go to the attributes of the HTML Form element-> readonly = "readonly".

  Hope this helps you,

  Kind regards

  Jitendra

• * ERROR *: file d:/build/ob/bora-127388/bora/vim/lib/gvmomiMOMgr. c: lin

  Hi friends:

  I m automation ESX 4.0 with vix api 1.6.2... When I connect to the server I get this error:

  ERROR*: file d:/build/ob/bora-127388/bora/vim/lib/gvmomiMOMgr. line c: 212: failed assertion: (priv-> updatesListener == NULL) abandonment...

  I read in other threads and disconnect me properly the host, I have reinstall the server, etc... but I have can´t ignore this error... What can I do?

  Thank you!!

  What you write it in? C++, C#? If you're not do whatever it is threaded, then you should be able to get it to some stable level by closing all handles and logout (you think you are, but you are not), so it's a bug in your code. If you do this on multiple threads to several virtual machines, it will not work with 1.6.2 due to known bugs. If you write it in c#, use VMWareTasks and save yourself to treat the headaches with handles - all that needs to be closed is IDisposable.

• The dreaded error "file not found vmdx.

  I did the supreme error of trying to work on my computer when I am ill and not thinking clearly.  No need to chastize me - I am already beaten pretty badly.  Here's what I did:

  I have a Virtual Machine for Windows XP Pro SP3 (32 bit).  The HARD drive has been set to only 40 GB.  I need to increase it (and have the space), so I turned off the virtual machine and tried to change the size of the HARD drive.  I was invited I can't make changes on the computer virtual HARD disk if there are no snapshots then (cringe) I removed all the.   VMWare has done its thing and removed all snapshots (takes TOO long).  I changed HARD drive of 40 to 80 GB virtual computer and clicked on apply.  I started the virtual machine and the HARD drive was still at 40 GB. I tried to turn off the virtual machine and the closure of VMWare, but when I restarted the VM showed a 40 GB HARD drive (even if the parameters he showed to 80).

  So I thought that maybe I need to turn off the Mac in case there is some kind of conflict of HARD drive.  So I turned off the iMac completely, let rest, then restarted everything.  When I walked into the virtual machine and tried to open a window of the Explorer, the virtual machine could not read the HARD drive (there was this animated icon 'search').  I could read the files in different folders, but Explorer couldn't read the HARD drive.

  So I powered down and pulled up the parameters VM & gt; Hard drives and I saw that the "Split into 2 GB files" has been verified "."  I did a superficial check in the help files (with my brain foggy-sick) and thought that it was not the right setting, so I disabled it and clicked 'apply '.  "VMWare has started doing his thing (took a very long time) and ends with an error"file not found"

  Now, when I try to start the virtual machine, I get the dreaded message: "file not found: Windows XP Professional.vmdk.»  This file is required to power on this virtual machine.  If this file has been moved, please provide its new location.

  I checked the spotlight.  I checked the Time Machine.  There is no file of this type.  Y at - it a hope?

  In the worst case (assuming that no hope), is it possible for the data files of the wreck of the virtual machine?

  iMac OSX 10.5.8 running

  Core 2 Duo 2.8 GHz

  4 GB of Ram

  HARD DRIVE 300 GB

  Need to see a file that lists the target Virtual Machine package, and you can use the instructions below to get it in the preferred form.

  1. in a Terminal (/ Applications/Utilities/Terminal), type the following without the quotes, including the trailing space, however do not press ENTER again and note that the following contains lowercase L, not those: 'ls - lAF.

  2. in the Virtual Machine in Fusion library (VMware Fusion (menu bar) > window > library Virtual Machine), ctrl + click on the virtual computer target, then select 'show in Finder '.

  3. drag and drop the computer virtual target on the Terminal and this will fill the full qualified path of the virtual machine.

  4 type the following without quotes, including the leading space, then press ENTER: "' > ~ / Desktop/filelist.txt '"

  Example of command line full in a Terminal:

  ls -lAF /Users/${USER}/Documents/Virtual Machines.localized/Windows XP.vmwarevm  > ~/Desktop/filelist.txt
  

  5. then attach the filelist.txt file that was created on the desktop to a response message.

  ==========

  Also the vmware.log file, (usually 4 of them), from within the virtual computer target package and if you need help to throw an eye to gather Information for VMware Fusion

• Creating movie SWF errors file

  Dear Forum,

  CS5.5 running and I have errors when I publish, debug or listen to samples:

  Creating SWF movie to the error file.

  Make sure that the destination file is not read-only or opened by another application. Also, check that the file name is too long.

  This error appears constantly and sometimes didn't appear at all. I sometimes find myself hammering Alt + Maj + F12 for twenty times before we get to "through". I've seen a number of subjects passed on this issue, but none of the solutions presented here seemed permanent solutions. Does anyone have an idea? It is kill productivity, really.

  Thanks in advance.

  Disable that and also clear your ASO cache in the same menu as you test your movie from. See if you have a cache problem.

• Explorer has caused an error in Kernel32.dll

  OK... I had recently installed Vista Ultimate Upgrade on an existing installation of the factory of Home Premium.  I don't know if this problem has occurred before the upgrade or not, as I have dual boot Vista and XP.  Understably, I tend to use XP ninety percent of the time.  Anyway, if I explore folders using Windows or Powerdesk File Explorer I get "Explorer has caused an error in Kernel32.dll" when the right click on ALL files.  Also, I get an error when you choose the "Device Manager" shortcut in the system window.  But I can open the Device Manager in the control panel list.  I did research to my heart's content.  For the life of me, I can't solve this question everything.  Help!  Please, I beg you. If need more info I adhere to me.  Thank you.

  Failing application explorer.exe, version 6.0.6001.18164, time stamp 0x4907e242, failed module kernel32.dll, version 6.0.6001.18000, time stamp 0x4791a76d, exception code 0xc0000005, offset 0x00048f47, process id 0 x 1168 error, start the application time 0x01c96c1e3f92be10.

  may be a problem of system files try this:

  Click on run in the start menu, if you have run here... try pressing Windows key + R and type SFC / SCANNOW (you will need to insert your windows cd/dvd in the drive) Microsoft Most Valuable Professional

• Latest updates installed (today) causing script error...

  Before installing the latest updates, our MRP program would produce a PDF file that can be printed / emailed.  After the update, I get the following error message: cannot export the report... file://jbserver/JobBOSS%20Server/Reporting/JBReport.vbs, then OU want to continue running scripts on this page?

  I know that 1 updates causes this error, but not that one, I would uninstall that one and be able to advise my company update not installing.

  Thank you!

  Hi Bob,

  We could identify that update (KB3102429) was the origin of the problem with us export our MRP system.  I uninstalled the update and then I hid it to avoid this update again in the future.  It is great for us, and everyone is back running.

  I hope that this solution will work for you.

  Best regards

  Holly