causes VIX/vmrun.exe ' error: the specified version is not found "with WS 8.0.1

Similar Questions

• Unable to connect to the host.   Error: The specified version is not found

  vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

  Unable to connect to the host.

  Error: The specified version is not found

  Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

  I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

  Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

  Any help would be appreciated.  Thank you.

  You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

• Flash Player error: THE SPECIFIED MOUDLE IS NOT FOUND

  I am facing a problem when I open my flash memory

  It is said:

  Rundll

  There was a problem starting

  THE SPECIFIED MOUDLE COULD NOT BE FOUND

  How can I solve this problem?

  Original title: Rundll

  Hello

  Thanks for joining us out on Microsoft Community Forums.

  From your post, it seems that you are unable to access the USB key and it gives you an error: the specified module could not be found.

  1. The USB Flash works fine in another computer?
  2. Have you tried any other USB on your computer?

  You can try the following steps and check the result.

  Method 1: You can try to run the hardware and devices Troubleshooter and check if it makes a difference:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: However, it could be a virus, I would also say that you to download and run the last scan Microsoft security on USB flash and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  You can also check out the link below and follow the suggestions of SpiritX MS MVP responded on August 20, 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/specified-module-cannot-be-found/287433d7-330e-4c7c-b0b8-796cd43caeb6

  Let us know if it helps. If you have other questions related to Windows please keep us informed and we will be happy to help you.

• Error: the specified module is not found oad libraiy cpythond ii failed & file c:\program \uniblue\\registry booster\puthon 26.dll.

  Original title: error MESSAGES.

  {Thespecified module not found oad libraiy cpythond ii failed} as {c:\program leader \uniblue\\registry booster\puthon 26 / dll} any idears thank you Jimmy

  I think you mean Python:

  Install Python 2.6:

  http://www.Python.org/download/releases/2.6.6/

  BTW, don't use Registry cleaners. Read what Mark Russinovich wrote on these useless tools:

  "I don't and never will implement a registry cleaner since it's of little practical use on anything other than Win2K terminal servers and developing one that is safe and effective requires a huge amount of application-specific knowledge."

  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot start Far Cry 4; error "the file version is not compatible with the version of Windows...". »

  * Original title: little problem!

  everytime I open far cry 4 or the instalastion of a graphics driver it shows like this... What can I do to solve this problem!

  If you don't do this there will be no more questions about what you have:

  Click on the button/ORB start in the lower left corner of your screen. Or, press the button of your keyboard Windows logo.

  In the type box:

  Msinfo32

  Select / click msinfo32.exe and the system information dialog box opens.

  Click System summary, click on edit, select all (Ctrl-A), copy (Ctrl-C) and then paste (Ctrl-V) the information back here in your next reply.

  For information about video drivers, expand components, click view, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) feedback here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

• Error on startup: "Error loading C;\windows\apakahubozerahe.dll the specified module is not found."

  Whenever I start my PC, you receive this error message; "Error loading C;\windows\apakahubozerahe.dll the specified module is not found.   How can I get rid of this? I can't find the file in c: Windows to remove and my registry cleaner does not clean it?

  He does not seem to cause any trouble and disappears when OK is hit.

  Hi Kevin!
  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  He helped?

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Error message: "error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found."

  I have an error message box that always appears at the start of my computer.  It says: "Error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found." I have a Dell Laptop Inspiron 1720 running Vista. I just 'X' it out and continue on but would like to get rid of it.  I don't know that it's touched something that needs correction.  Thank you

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• "I get this started" error loading winera32.rom the specified module is not found.

  When windows starts, this message appears "error when loading winera32.rom the specified module is not found". the rest of the windows works fine.

  It's a malware. It has been removed from your AntiVirus Scanner and registry entries are always present to start the malicious program at startup.

  Start regedit.exe and search (F3 or CTRL + F) for winera32.romand remove all the entries that you find.

  For more safety, perform a complete equipped with scanning AntiVirus as well as Microsoft Security Essentials scan your PC with Malwarebytes' Anti-Malware.

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• Desktop Windows Manager is disabled and the theme service is not running. Error 126: the specified module is not found. »

  I tried to install VistaOSX the theme of this site http://vista-os-x.en.softonic.com/. My current theme of vista disappeared and he turned to classic windows. I'm not able to activate Desktop Windows Manager. Error code I get everything by starting the service theme is "Windows could not start the service theme on the local computer. Error 126: the specified module is not found. »

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Removal of startup parameter error: the specified Service does not exist as an installed Service

  Hello

  I am currently removing two services in Autoruns, for the reason that they are highlighted, and that means that it no longer exists. However, I'm running into some trouble while he was trying to do, I get the following error:

  Removal of startup parameter error: the specified Service does not exist as an installed Service

  For diagnosis, I downloaded my log of Autoruns on OneDrive text file and you can view it by clicking here.

  Thank you

  Party of Lighthouse

  My research yesterday using Google yesterday suggested malware damage.

  Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop-down... Type cd\ and press ENTER. Type "chkdsk c:/r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter it when asked if you want to run chkdsk on restart the computer. Type exit, press ENTER, and then restart the computer.

  Please run the SFC system and say if she cannot fix corrupted files: http://support.microsoft.com/kb/929833

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• "The specified procedure is not found."

  I'm following you try to run an application using oracledb.

  C:\src\stash\calculations-viewer>node server/index.js
  C:\src\stash\calculations-viewer\node_modules\oracledb\lib\oracledb.js:28
      throw err;
      ^
  
  
  Error: The specified procedure could not be found.
  \\?\C:\src\stash\calculations-viewer\node_modules\oracledb\build\Release\oracledb.node
      at Error (native)
      at Object.Module._extensions..node (module.js:450:18)
      at Module.load (module.js:356:32)
      at Function.Module._load (module.js:313:12)
      at Module.require (module.js:366:17)
      at require (module.js:385:17)
      at Object.<anonymous> (C:\src\stash\calculations-viewer\node_modules\oracledb\lib\oracledb.js:23:15)
      at Module._compile (module.js:425:26)
      at Object.Module._extensions..js (module.js:432:10)
      at Module.load (module.js:356:32)
  

  "oracledb.node" exist at the location mentioned in the error message.  The module relies very well and includes the paths to the OIC and libs seem to as well. 

  
  

  This is my journey, I triple-checked that they exist.
  

  
  

  OCI_INC_DIR=C:\oracle\instantclient_12_1\sdk\include
  OCI_LIB_DIR=C:\oracle\instantclient_12_1\sdk\lib\msvc
  

  
  

  I must be missing something, but I can't see what.

  
  

  Any ideas?

  
  

  Thank you

  
  

  Glenn
  

  
  

  
  

  Oh dear.  I cleaned my WAY last week and must have inadvertently removed the oci.dll her.

  [head of fringe on the desktop]

• Script to add a domain user to the local Administrators group raises the error "the network path is not found."

  I have a Windows Server 2008 R2 domain and a Windows XP Pro workstation that has been attached to the domain and then disconnected. I am trying to create a VBS script to add a domain user to the local Administrators group.

  I log on my computer as a local administrator and run the following script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim OUser: Set oUser = GetObject ("WinNT://domainname/username")
  oGroup.Add (oUser.ADsPath)

  This script returns the error "the network path is not found."

  However, I am able to go into control panel > user accounts > enter the user name and the domain name > click Next... > choose the administrators of the 'other' group and the user name will be added to the local Admin group.

  The same script runs without error if it is launched after logon on the workstation with a domain administrator account.

  How can I get my script runs without error, when you are logged into the workstation as a local administrator?

  Best regards, Andy

  The code that I used came from here. If the syntax of the Add method is passed to oUser.ADsPAth to "WinNT: / /" & domainname & "/" & username, the script works correctly.

  Therefore, the modified script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim strUser: strUser = "WinNT://domainname/username."
  oGroup.Add strUser

  Thanks to Qasim Zaidi to show the code of work here.

  Best regards, Andy