CC .exe file is not loading. [Please help!]

Similar Questions

• Big flash file does not open please help

  Hi all
  
  Can someone help me please. I have a flash file that is 74 193 KB, it opens quickly on my pc but when I place the load on my site it takes forever to open. What can I do to make it open fast iss he os on one of my important links.
  
  
  Please please help
  
  

  generally, when creating for the web, you don't want more than 1 MB or more... people don't like waiting for things to load a T1 connection... it would take 6 minutes, Dial-up would take 3 hours... you certainly need that flaked into small sections and make it more dynamic.

• Computer HP laptop window vista does not load please help

  someone asked this question and I have the same problem!

  I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

  When the laptop turns on, it gives me two options:
  • Start the reboot system (recommended)
  • Start Windows normally

  If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.

  Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.

  I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either

  I tried F8, F11, F12 and nothing works

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• all my files are on the notebook and I need them in normsl even when I download them they are always note pad please help :(

  now I am a minecrafter and I want to get a mod but all my files are in note pad Please HELP :(

  Hello

  You can follow the suggestions mentioned below and check with the question.

  Method 1: You can check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 2: Install the fixit from the following link.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program:

  http://support.Microsoft.com/kb/950505

  Method 3: You can try a system restore to the date where everything worked well.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  NOTE: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  I hope this helps!

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!

  I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!

  Version: Adobe Acrobat 9 Pro

  Windows

  I found the solution:

  In the PDF file, click View > Navigation panel > Pages

  I had to reset panels to view the Pages again.

  Thank you!

  Heather Solis | Operations associate | Crown AFAM Capital, Inc.

  [personal information deleted by Moderator]

• My WinXP is damaged-exe files will not open

  Apparently damaged by VJT.exe and my .exe programs will not load or run. I get the 'Open with' box or a file not found. I am able to run the programs with the .com suffix. Please tell me what to do to solve this problem. Is this some sort of file association problem? My AVG antivirus was quarintined VJT.exe.

  Hi Systemwhiz,

  You will need to rename regedit.exe to regedit.com (my computer-> tools-> option-> view file-> remove tickmark to "Hide extension for known file types"-> ok-now right click on local disk C:\WINDOWS\ online search of regedit.exe rename regedit.com).

  Then click on Start-> Run Type &-> Regedit-> ok.

  Go to HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command
  (you will have to press on + to achieve order)

  Now, double-click default slot right windows and then change the value in this box for '%1' % *.

  Repeat the same for HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

  Close regedit, restart your pc and check if its working.

  You can also check: http://support.microsoft.com/kb/310585

  I hope this helps.

• .exe files are not open; affected by the Windows Security Center of lazy virus

  Hello!

  As the title indicates, none of my executables will open his; on the contrary, when I click on an icon or similar function (as in the start menu), I'm inclined to the screen 'open with... ». I noticed that most often, if I run the program as administrator, it is likely to work without having to manually find the file - still a bit tedious however.

  I'm assuming that since I was recently hit by the virus which is a fake Windows Security Center, something my registry has also been hit (take into account the fact that I'm not savvy computer in the slightest). It happened on my user account initial and rather than take action on the right, then, I decided that I would use the other account that I had to install a program better anti-virus (Norton provided ISP) than the one I had been using (the two admin). At that point, I had finished all my activity moved to the new account and it worked very well until the virus had one possessing this account as well - delete on the first user account seemed to have deleted only the effects of my account but still affected everything I did after that. This time, I went and deleted all accounts and checked to ensure that it is not at all. After getting rid of the virus, it's the same thing: none of my .exe files will open without using the monitor "open with...". ». I'm not really sure what action to take from here, I have not done much to remedy the situation, and I'm going right through the screen of "open with...". "to get to what whatever - so any suggestions or help would be very appreciated.

  Keypoints:

  • .exe files are not open (However, in some cases, the "Run as Administrator" option overrides it)
  • recently hit with (deleted) and fake Windows Security Center virus ; That's when the .exe is no longer
  • is not much in terms of addressing this problem, do not know what to do with regard to the question of if my situation calls for something specific

  I tried to cover everything that seemed important to address; However, if there is more need information, let me know. I am about average in terms of computer navigation and therefore my understanding of what many of these commands, functions and files is a bit Basic.

  Thank you! :)

  Thanks for the very comprehensive post. Run the Doug Knox fix (that isn't a .exe that you can do this).

  http://www.dougknox.com/XP/file_assoc.htm

  Then follow the instructions to delete here:

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  MS - MVP - Elephant Boy computers - don't panic!

• not initializing .exe files do not

  Recently my computer did a disk check when I turned it on. After that he made the check when I logged on I saw a lot of notes, saying that .exe files are not initialize correctly click OK to terminate the program. Since my internet is not working I can't use it in safe mode.

  Hello

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• The Manager.exe HPConnection does not load correctly. An error message is displayed each time

  Hello

  I have recently upgraded to windows 8 and since then, I have a problem.

  The Manager.exe HPConnection does not load correctly. An error message is displayed every time that restarting the laptop.

  Would you please guide me how to solve this problem.

  Thank you in advance and I look forward to hearing from you soon

  Best wishes

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• Some .exe files do not immediately start after a double click.

  Some .exe files do not immediately start after a double click. However, the CPU usage is in place and I can see the name of the image file in the Task Manager process. But when you double-clicked once again, it opens and the CPU usage is even higher. It's like running two same .exe files. I already ran Microsoft Security Essentials to remove all viruses if that's the case, but it did not help. Is there something wrong with the files?

  This happens because your antivirus starts to scan the file when you try to run it. You can check by

  1 disable antivirus real-time protection (note to Moderator: not recommended!) and try to run the file again
  or
  2. open Task Manager > go to processes (or details if it is WIndows 8) > run file > monitor processes belongs to antivirus to see if they consume the CPU power
  If this is the case, it is made by antivirus normal safety measure to keep you protected.

• Hi my audio - pc does not work please help me

  Hi my audio - pc does not work please help me

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand wh

  I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand what is happening? We put it on automatic renewal so I know it's not that we have not renewed this subscription, because we pay automatically.

  Hi olivias,.

  Looks like there may be some confusion on your system which application should be associated with PDF files. You can reset the file name associations by following the steps described in these articles (depending on your operating system):

  How to change the default application for a file type. Macworld

  http://Windows.Microsoft.com/en-us/Windows/change-default-programs#1TC=Windows-7

  Please let us know if you have any additional questions.

  Best,

  Sara

• I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP

  I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP

  Why has been upgraded to El Capitan failed before?

  The only problem is that some applications require the upgrade and some devices that connect to the computer require updated drivers up-to-date. The problem is that for some devices and applications updates are not available and so they do not work with El Capitan.

• My iPhone FaceTime apps not available please help FaceTime apps apps important to vary

  My iPhone FaceTime apps not available please help FaceTime applications vary important apps and my iPhone India user please help me to face the time apps

  Where have you bought the phone?  Is it a Middle Eastern countries such as Dubai?

  If Yes, then there is no FaceTime on it because it is prohibited by the Governments of middle Easter and you will never power get FaceTime on this phone.

  Return it and sell it and buy a phone form a country where FaceTime is not banned - you will never find FaceTime on this phone.