CC of Photoshop is having a problem with the Healing Brush tool

It comes to my setup with the layer I'm working.

1 got to Image menu / apply/image layer = bass tones layer (below) / mixture = Add / scale = 2 / and then select reverse. It looks like a high pass filter, but it is not.

2 Exchange mode layer to linear light that restores the image to its natural state

When I try to use the Healing Brush tool on my bed to make changes to a face I use the alt key pressed to select the sample point, photoshop seems to block the point that I select.  And he is on the screen in what looks like a high-pass filter, and then when I try to move the brush again point to perform a healing event fullscreen drag with the brush movement.  I don't then deselect the option once I use the ALT key. I've experimented a bit and found that if I hold down the ALT key it removes the high pass, but as soon as I release the ALT key, it goes back in a high pass.   I also tried clicking on this layer and by choosing another layer, the high-pass goes and I can use the mouse to select other items.  But as soon as I go back to the layer that I want to work with the screen comes back to what looks like a high-pass filter and you guessed it, the mouse drags the whole screen.

Thinking that this might be a problem with Windows, I turned off my pc and rebooted and then restart photoshop and I went back to the same process and have experienced the same problem.  So I'm making this post looking for a solution.

In the menu of the window display the Panel Source of duplication.

Is the clipping option at the bottom off? This would cause all of the image to display in the overlay. -What is the opacity of the overlay and blending Mode different 100% and Normal?

These options are not used with the Spot Healing Brush as it makes its sampling automatically.

Tags: Photoshop

Similar Questions

  • I'm having a problem with the adjustment brush

    I'm trying to highlight a colored area of an image that has been converted to black and white to color.

    The only way I can do this work is the first painting of the whole image with the adjustment of Saturation-100 brush and then paint the color back in by pressing the ALT key. But there may be other ways?

  • Retouch with the Healing Brush tool

    This question has been posted in response to the following article: http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-7607a.h tml

    You can either make a selection that doesn't include the dark border or use the Clone Stamp tool. The aligned check box is for when you don't want to try always to the same place every time, if you have only a small area of cure then you would clear the check box aligned for example.

    The help files tell you what are the characteristics to be used in which situations because there are so many possibilities in Photoshop is usually not a way it's better than the other. What matters most isn't the end result, if you used a filter of sharpness to blur the image, or what have you.

  • I'm having a problem with the Clone Stamp tool.

    I have painted on a logo on a jacket over one of and freeze it framed. That everything worked well, but as soon as I duplicated the layer, I get all these odd paint strokes. Help, please.

    Source language

    Screen Shot 2015-06-17 at 9.47.01 AM.png

    PAINTED ON LOGO

    Screen Shot 2015-06-17 at 9.44.42 AM.png

    QUESTION

    Screen Shot 2015-06-17 at 9.44.54 AM.png

    Well I him I had worked. Apparently I needed to reward the layer that I painted before I duplicated it. Once I did, I did a freeze frame, hidden around him and it worked fine!

  • Problem with the Spot Removal Tool

    The last several times I tried to use the removal tool the place, he did not "heal" the area that I asked for it to heal.  He heals an area adjacent to the area I want to heal.

    Any thoughts on the opportunity, it's a LR bug or something is happening with my Macbook?  I would like to address...

    Note that I ALSO encounter this problem with the adjustment Brush tool.

    (I know I can do this sort of editing in PSCC but for simple stuff like this, I usually use LRCC)

    Thanks for your help! LJB.

    IMAGE: miniature horse headshot for a friend

    screenshot 1: weird grass, I would like to change.

    Screen Shot 2016-07-25 at 12.36.14 PM.png

    screenshot 2: the area I have hi-limited with spot Healing Brush (it's messy but the best I could do while also doing a screen shot and not to release the spot removal tool)

    Screen Shot 2016-07-25 at 12.36.21 PM.png

    Screenshot 3: the pin code of the area of selection is completely in the wrong place and my strange blade of grass is still there.

    Screen Shot 2016-07-25 at 12.36.26 PM.png

    Change the Clone in the Heal and vice versa does not move existing pine. You will have to redo the brush stroke after changing between Clone and Heal.

  • Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.

    Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.

    Go to the Photoshop preferences, then on the performance tab.

    From there please click on advanced settings, change the drawing on 'Basic' mode and uncheck the option for "Open CL" once, then try with a Jpeg file.

  • I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

    I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

    You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
    You can restore the default user set prefs ("BOLD") via the context menu.

  • I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is the way it should lo

    I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
    It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
    [email address removed to protect your privacy and security]

    Try disabling hardware acceleration in Firefox.

  • Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

    Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

    Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

    Hello

    I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

    Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

    I have laptop with AMD Radeon R7 M260

    Win7 64 bit

    PC Toshiba laptop satelite l50 - b

    Hi doriv,

    • Update your graphics card driver.
    • You have the graphical configuration Swichable?
    • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
    • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

    Kind regards

    Assani

  • I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Photoshop has been giving me the warning:

    Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

    No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

    Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

  • Photoshop has encountered a problem with the display driver

    I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

    "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

    Can someone help me with this? IT IS URGENT!

    The problem is the driver for your video card, no Photoshop.

    Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

  • Having a problem with the Muse crashing when opening a Web site I designed in Muse.

    Having a problem with the Muse crashing when opening a Web site I designed in Muse. You need to be able to access this site in order to update for my clients.

    [LASP/updateCaches] TypeError: Error #1009: cannot access a property or method of a null object reference.

    All adventures Rafting | Wenatchee Whitewater Rafting trips - two hours East of Seattle

    Could you please send us the .muse file to [email protected] as well as a link to this topic? If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

  • problem with the color picker tool

    Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.

    When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.

    Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.

    Can anyone suggest what might be the problem.

    This has only started happening recently and nothing major has been installed or removed from Fireworks.

    See you soon
    LTA

    Hi Alex,

    Im not sure if you said today or not.

    "Your a chamption!

    Thanks for your help, it works perfectly now.

    I must have accidentally clicked on the nod to the colors for the Web.

    Cheeers
    Malcolm

  • The Healing Brush tool problem

    I have Photoshop CC 2015 and Healing Brush tool does not work properly, it works like the Clone Stamp tool. When I use the Healing Brush tool, it clones the patch instead of merge. Does anyone know how to fix this? Thank you!

    Ozge salvation,

    Please check if window > Clone Source > Clipped is enabled or disabled

    Also make sure that if you have normal, opacity to 100%, the value brush size not set very broad

    Let us know if this helps

    ~ Assani

Maybe you are looking for

  • Satellite M110 - how to replace the HARD drive?

    Need to replace my hard drive because the original is f & % $ ed. I tried to connect the original hard drive from my other laptop via a USB cable to Sata, but it does not appear. You can feel it spinning. I was able to do a test of HARD drive on it a

  • HP ENVY 5530 All in One: what "Scan by means of the computer?"

    I use Windows 10, 64-bit and I have a wireless hp envy 5530 all in one printer on my network. I do not understand what "Scan to Computer" means... does that mean I can scan a web page and send it to my computer, it means scan a document and send it t

  • can I remove this kind of files from drive c in the windows folder, kb2544893.log - for example

    There are many of these types of log files, I need to make space on the c drive, once again - kb2544893.log - or are they update the files I need. they are on windows, in the c drive - thank you

  • Update of Windows Live Mail

    Signature file problem when Windows Live Mail updated to version 2011, my sig file lost their hyperlinks for email, Web site address. They were in text files, worked fine before.  But now, no.

  • HP photosmart c3180: hp photosmart c3180 flees

    I just changed my black cartridge and saw a Bell in the form of lots of ink (about 1 cm in diameter and 1/2 cm in altitude) in the bottom of the printer on the right side under where the black ink cartridge sits when the printer is on. There is ink o