CCNP recertification

Similar Questions

• I bought a 6 iPhone as good as new, but inside in Maps application, it has a PIN in other countries, with the full name, phone, address, linked to another address in the city of mi. My suspect is if this is a new feature of relly is a recertificated or mi

  I bought a 6 new iPhone with iOS 9.3.1 system realized by me. But in the app Maps, I found stranger´s information of another person, pinned as well in my country (Uruguay) and the Argentina, including the full name, address and access a address in Montevideo to another in Buenos Aires.

  I Don t know the name or personal information provided here, and I never put there. So, I need to know if I bought a new device or a recertificated and otherwise, maybe stollen.

  Think it is very difficult to understand something, and I want some directions before asking this question to my provider here.

  Obviously, it's not a new phone. Take it to where you bought it. Get your money; Don't let them pass you to another 'new' phone.

• CCNP security certifications

  Hello

  Can someone please advise if I can get one of the new security review to keep my CCNP R & S existing certification that expires in April 2016

  I passed old exams 642-618, 642-637, 642-627 already. Can I appear just for the review of 300-208 to keep my certification valid and thus also complete safety CCNP certification.

  Any suggestions would be greatly appreciated.

  Thank you

  Dobbelaere

  Yes, you can pass a professional or expert level exam and who will be renewing your certification CCNP R/S. If you do the SISAS tests now, then you can use it for your CCNP security when you passed also three other Sec CCNP exams (and the sine qua non, the CCNA Security).

• CCNP path

  Hi guys,.

  I'm pass Linux Cisco field. Saved money, quit my job, have enough time to study, passed my CCNA and study now for CCNP R &.

  So far so good-, but as you all know CCNP is much harder and I wonder maybe I should pass just the road and then try to find some work/project to acquire practical experience.

  If you had enough time as me - would you satisfy the three - road, switch and Tshoot or you pass only the road for example and then trying to find a job?

  Wasn't too much to get all the certificates without any practical experience? I have 3 x 3550 switches at home and I do a lot of labs in GNS3 but anyway...

  If I spend only road I would have still more than two "hits" later when I need to renew my certification and also save money...  Although saving money is not the point here.

  I tend to believe all three is perhaps the best. Assuming I pass all then in three years I have to go for another CCNP certification (or higher) or can I go for example, CCNA Security (bottom) to renew my registration?

  Thank you very much!

  Daniel

  Everyone learns a little differently, but for me the experience is the best teacher. I would try to get a job that gives you experience with routing and switching as soon as possible.

  When I hire someone that I would rather they have more hands-on experience than approvals: all other things being equal. Certifications are useful but one indicator of the capacity and interests of the person. The industry is full of people who have crammed the test but cannot configure or troubleshoot a network on their own. Some employers require a certain certification or another, but many waive this requirement if you can demonstrate solid knowledge.

  Once you have a CCNP, you can keep current passing all exams professional level (or higher) within 3 years to earn the CCNP. A review of aggregate level is not enough to maintain the current CCNP-level certification. Details of which are published here.

• CCNP 300 - 206 (SENSS) safety switch

  Hi all

  Currently, I am studying for CCNP security 300-206 (SENSS).

  I came across the following doubts. If they seem to be stupid & funny, I can't go to my car without posting here.

  1 > what will happen if we give "Maximum authorized MAC 5" and 'Sticky MAC address' orders together under the same Interface?

  2 > does DHCP Snooping Database table stores the NON-DHCP Clients(Lets say static) MAC & IP addresses?

  3 > mechanisms made DHCP Snooping and dynamic ARP Inspection will work under the plain layer 2 only choose?

  4 > can "Source Guard" stop rough APR, as the dynamic ARP Inspection packages?

  5 > private VLAN interfaces can communicate with the primary VIRTUAL local Network Interfaces?

  It may need little explanation - here's the scenario:

  Suppose we have 100 primary VLAN, VLAN 300 community VLAN 200 and isolated.  And here's the interface assignment:

  GI Gi0/2, 0 / 1--> VLAN 100 primary

  GI Gi0/4, 0 / 3--> community VLAN 200

  GI 0/5, Gi0 / 6--> VLAN isolated 300

  But we have converted only Gi0/1 in the Promiscuous Port and mapped VLAN 200 and 300 of VLAN.

  Can Gi 0/3, Gi0/4, Gi 0/5 & Gi0/6 contact GI 0/2?

  Could someone please help?

  Thanks in advance,

  Prasanna Kumar deully

  (1) port-security allows a single MAC by default. Post-it adds the learned address to the config and 'fixed' this address. If you change portsecurity to allow five addresses, then all these up to five addresses are added to the configuration.

  (2) No, if you use this table for other functions such as DAI or IPSG, you will need to define exceptions of static for systems without DHCP. Before you implement these features, I make sure that ideally all systems use DHCP. Cameras, printers, multifunction devices and so on. Many of them get bookings on the DHCP server, but they must use the DHCP protocol to do functions such as DAI and IPSG very.

  (3) what is a "simple layer 2 switch' for you? Today, the definition of Layer2 or Layer 3 defines how the device it is transmission. A Catalyst 2960 is generally used with Layer2 forwarding. But this does not mean that there is no function to look in the payload and to inspect the traffic up to the application layer. These functions are also available on the older Catalyst 2950 (initially there wasn't no DAI, but DHCP Snooping) and are now available on all switches access (catalyst).

  (4) function no, each has its own security function. DAI is to inspect the ARP-payload, IPSG is to inspect the source addresses.

  (5) don't know what you mean...

  If Gi0/3-Gi0/6 are configured for private VLANs as shown, then they can communicate directly with Gi0/2. If they are not yet configured (I guess that's what you mean by "converts"), as they are probably members of a VLAN different and can communicate with Gi0/2 through a Layer 3 device.

  Some links to Guides-Config with more information:

  • Port-security
  • DHCP Snooping
  • DAI
  • IPSG
  • Private VLAN

• CCNP security - SISAS 300-208

  p.137 book of Aaron Woland, entirely of distributed deployment

  "The maximum number of NHPS that may be associated with the PAN + combined MNT in the deployment of four nodes, is five Ssnp, which makes deployment of seven nodes."

  If my interpretation is correct, I take the configuration in Figure 7 - 4 shown on p. 136 and add three blocks more (e, g., ISE-5, 6 - ISE, ISE - 7) to respond to the above statement.  My interpretation is correct?

  Related to this: how 7-5 Figure 5 ssnp at 40?  The last sentence on p.137 "the maximum number of NHPS in this deployment also increases of 5 to a maximum of 40 Ssnp."

  What factor (s) am I missing that determines the amount of NHP in any deployment model?

  My interpretation is that each node of PAN and each node MNT can support a maximum of 5 knots PSN.

  Thank you.

  If anyone is interested, teamwork to get the material for the latest CCNP security exams, I'm available.

  KA,

  The interpretation of the addition of ISE 5, 6 and 7 for the deployment of 7 knots described is correct.

  The PSN 5 limit is when you have dual persona (PAN and MnT) nodes. Only when you have dedicated nodes of persona (PAN only on one node, NTMs on a separate node), you can move up the maximum number of PSN past 5 a maximum of 40.

  (I spent the SISAS test last month.  :))

• CCNP certification

  Hello!

  I have a certification CCNP routing and switching active until November 2016 and active safety of CCNA until October 2017.

  My CCNP R & S certification is about to expire, so I intend to acquire the CCNP security.

  Would have written one of the CCNP security exams to recertify my CCNP R & S course or should I write all four CCNP security exams to renew my CCNP R & S class?

  Bala

  Passing any 642 - xxx or 300 - xxx (professional level examinations) will extend your CCNA and CCNP certification dates.

  This is confirmed at the following addresses:

  http://www.Cisco.com/c/en/us/training-events/training-certifications/CER...

  http://www.Cisco.com/c/en/us/training-events/training-certifications/CER...

• CCNP security certification!

  Hi all

  I question who I am spent by all the associated cisco hope web found my answer. but I have not found the answer.

  I attended security CCNP courses.

  640-802 (CCNA) - HAS NO

  640-554 (CCNA Security) - ADOPTED

  642-637 (SECURE) - ADOPTED

  642-618 (FIREWALL) - ADOPTED

  642-648 (VPN) - ADOPTED

  642-627 (IPS) - ADOPTED

  each of them ended in NOV. 3 in 2012. It seems as if I'm taking CCNA exam (640-802), it will complete the CCNP security certification. I was wondering is there a due date which I take CCNA (640-802)?

  If I pass the CCNA (640-802) security CCNP cert valid dates will be from 08 June 2013 or from NOV 03 in 2013.

  The 640-802 exam is only to be offrerd through September 30, 2013, date to take the review of version 2.0 new (200-120).

  My understanding of the dates is as follows:

  When you pass the final exam required for your CCNP security (and assuming that none of the previous reviews have expired - i.e. everything within 3 years from the date of final passage required review) your certfication will be issued with a validity period of 3 years starting from the date of the required final past.

  However, I would doublecheck with the support of the certification for a definitive answer:

  http://ciscocert.force.com/English/AccountInfo?retURL=%2Fapex%2Fcontactus

• CCNP exam

  My ccna expire on 10/04/2013, can I take my exam of ccnp course the same day

  Hello arafat.

  CCNP prerequisites

  Valid Cisco CCNA certification or any Cisco CCIE certification can act as a sine qua non.

  If your ccna expires on 04/10/2013, it is still valid, so you take the consideration of course in case of problems.

  Best regards

  Please note all useful messages and close issues resolved

• CHRC & CCNP Certifications SP

  Hello

  I achieve CCNP R & S. Can I candidate for CCDP without CCDA and CCNP SP without CCNA SP.

  Thank you in advance!

  1. "I can CCDP without CCGD candidate."

  You can take the exam of the CHRC, but you need to "valid Cisco Routing and switching CCNA and CCDA or any Cisco CCIE certification can act as a sine qua non."  before you get the certification of the CHRC. Reference source

  2. "CCNP SP without CCNA SP." Similarly, you can pass the exam but will not be certified until the prerequisites first. CCNP SP those are:

  • Valid Cisco CCNA Service Provider, or
  • Valid Cisco CCNA routing and switching of more have passed a minimum of 1 examination of the CCIP (QOS, BGP, MPLS, BGP + MPLS, ROAD, OIOS), or
  • Valid Cisco of the DAC, or
  • All Cisco CCIE certification

  Reference source.

• (R & S) CCNP for CCNP SP

  Hello

  I have a valid CCNP R & S certification. I am interested in the CCNP SP track. Because I deleted the Exam(#642-902) road in the CCNP R & S is granted to me to get the CCNP SP. Also should what tests I go to obtain the CCNP SP. I'm really confused as the migration of the CCIP tool suggests sometimes SPROUTE, SPEDGE AND SPCORE and sometimes it suggests SPADVROUTE, SPEDGE and SPCORE. Also, as a note it is mentioned.

  • The tool identifies the specific review numbers that are valid for the migration towards the CCNP service provider certification. Cisco is honoring the number specific exam for the CCNP service provider certification only, even if they are beyond their expiry date of 3 years. These reviews will be accepted until July 24, 2015

  What that means, it means that now only exams expired will be accepted until July 24,2015 or even the most valid that are not expired. The second confusion is if my review of course (which is not expired) qualify to become a CCNP SP that give me credit to SPROUTE or SPADROUTE as a tool for migration sometimes displays SPADVROUTE and sometimes SPROUTE.

  Thank you

  The way I see it, as of July 24, 2015, the answer is not simple.
  To get a valid CCNP SP, you must now pass all four CCNP SP exam. In addition, you also have a valid CCNA SP certification.

  Review of the ROAD, in combination with the R & S CCNA, gave credit to CCNP SP (SPROUTE) as long as you have three remaining exams (SPEDGE, SPCORE & ADVSPROUTE) before July 24.

  EDIT
  I don't know, I saw a CLN moderator post something in this direction not so long ago it is a. trying to find the post for your checking.

  EDIT 2
  I think Rigo answers your question in this thread: https://learningnetwork.cisco.com/thread/73709

• CCNP PULL and CCGD on one day?

  Hi all

  just out of curiosity, I have passed CCNA SWITCH and the ROAD and did training for the TSHOOT this month.
  I was eyeing with PCDC but for that I need also a CCGD. I looked in the topics and I realized that it is almost the same as CCNA withouth configs and some more advanced knowledge of theoreticakl, which was again covered in DISARRAY and formations of the SWITCH.

  Now the big question is like the TSHOOT and CCGD does not interlap, is it possible to make 2 on the same day?

  I mean that I'll do the TSHOOT and after a pause, I do the CCGD. They are not interdependent and even if I don't see one any of them, would be nice.

  Tounsiiaa in advance!

  I think that you should be okay to do both in one day. If you continue the CCNP classes and have a relatively recent CCNA R/S then CCGD should be a pretty simple review for you.

  I advise you only consider the wireless of the CCDA syllabus knowledge because they are usually not covered at the same level in the R/S CCNA.

  Best wishes for your continued progress of certification.

• Can anyone recommend either a hand on the center of training or school that teaches CCNA/CCNP on long island New York. Anyone know where to take these cert test also on long island New York or New York

  Yes, I want to know if anything can recommend you that a little hands on training center CCNA/CCNP and VMware training as well. I took the VCP boot camp but need more. Also nobody knows where to take these cert exams in NYC or Long Island NY

  OK thanks for the link I already find a location on the site so it's a good thing.  I'm looking in the CCNA/CCNP site you provided as well

• Recertification VCP4-VTC at VCP5-VTC

  Hello.

  I'm about to start my recertification because I have time until March 10, 2015 for that.

  There is an option for the exam VCP510 or VCP550.

  Could someone tell me what is the best approach for this renewal of certification?

  If I take VCP510, I will be eligible for an additional upgrade directly to VCP6 when it's available, or I would need first put to VCP550 and then to VCP6?

  Kind regards

  Vladimir

  VCP510 and VCP550 provide the same certification, the VCP5 VTC.

  They prepare you for the future.

  VCP510 is based on vSphere 5.0/5.1

  VCP550 is based on vSphere 5.5

• How long Adobe offers Photoshop CS6 recertification exams?

  I'm studying to to recertify as a Certified Expert in Adobe Photoshop CS6 (an an ACE Photoshop CS5).

  How long does Adobe offer recertification of Photoshop CS6 keeping available CS6 recertification?

  Thank you.

  Franck

  CS6 Adobe recertification exams are scheduled to be retired on March 31, 2015.