CD burning problem

Similar Questions

• Satellite P300 19 p - CD/DVD burning problem

  Hi, I'm new to the forum and I hope somone will be able to help.

  I have DVD burning problems. When I use software engraving the image is usually copied ok and then the burning process starts, which usually lasts only a few moments, then the machine spits out the disc burnt and wasted.

  I usually use Corel DVD Copy 6, but have you tried TOSHIBA and other programs such as NERO. With the help of Corel VideoStudio, it burns discs with a success rate of 90%, but the problem comes when you try to copy my own created disks.

  I tried different types of discs (that is to say + R and - R), and I also tried burning speeds.

  Anbody else suffers from this problem?

  I have managed to find an error code 06077-26 - 2A 040902, made this average anyhting for anyone?

  TEMPRO alerts appear to have provided updates firmware for a number of other DVD players, but not for my machine? Maybe it's due a? All the drivers are up to date.

  Thanks for listening and the anybodies help is more than welcome.

  See you soon.

  In my opinion, you should not think about buying replacements. If you think that the drive does not properly contact service. If necessary the reader will be replaced free of charge.

• Satellite A500: display driver & CD burning problem

  I have problems with the Nvidia Windows Kernel Mode Driver Version 187.98. I went back to Harvey Norman where I bought it and they said to update the driver. I got the update and it still happens. Sometimes more than 6 times within a few hours.

  Now I have problems burning photos on a disc.

  I really want to have this computer at the door and I have had for 3 months and have had nothing else into trouble with him.
  All Satellite A500 work like that

  > All Satellite A500 work like that
  I don t think so

  You must use the Toshiba graphics card driver in most cases that these drivers are pre-tested and should work correctly. BIOS should be also updated!

  > Now, I have a burning problem of the photos on a disc.
  You should check if the new CD/DVD firmware is available for your CD/DVD drive.
  You should look on the European driver Toshiba page. In addition to information, you will get a few details on the firmware available.

  If there is no firmware available, then you should test different CD and DVD from different manufacturers

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• Data burning problem

  HI I have a problem I have a satellite A60 662
  the Sd - R6112 dvd burner I can Burn dvd and CD music of Pentecost but when I burn the files data my nero said burn it well but when I whant to verify he cant wrid cd it's like he can't find someone who maybe now, but when I look in the folder , I can see her there, but it does not open I hope you understad me pleas help

  Sorry for my English

  Hello

  If you have a CD and DVD burner, you must pay attention to certain things. First, you must select your type of disc (CD or DVD). After that, it is important to choose the right category (data CD, audio CD, CD audio and data). After that, select a task, and you can burn successfully. Please be careful to choose the right category.

  I use Nero too and I've never had any problems.

• Toshiba M30-107 mast * one drive UJ-820 s with burning problems

  When I bought the laptop everything was ok, I could burn CD music, cd of data from any application. Now I can only burn CD from iTunes. When you use ITunes, I can use any kind of disc and it works fine. However, when I try to use explore to burn pictures on a disc or video with Windows media player 10, it is said, it does not recognize the drive or he manages not said there is no disk in the drive (when it obviously). Seems odd. I tried just about everything, but it's still only Itunes that works. Someone else has similar problems and how did you get around them?

  Hi André,.

  Have you checked that your optical drive is enabled windows before burning. If you right click on the drive in Explorer, there should be a 'Recording' tab click on it and check that the indicated settings are compatible with the set up you.

  It is also useful to check for virtual CD drives in Solution Explorer. If you find (other than the real drive) it will be necessary to disable them (right click) because Windows XP supports an optical drive.

  HTH

  Post edited by: NickyNoogle

• Satellite Pro L300 - CD burning problem

  I recently bought a Satellite Pro L300 laptop and I have problems with the CD's I created.

  Any software I use Nero, Toshiba etc I still get the same problem. The created disc will play on the laptop, but not in my home Hi-Fi, the reader will recognize the disk, how much tracks etc. but does not play. I use discs without brand that worked with my old desktop computer Dell & Sony DVD player.
  I can also not less than 10 x using nero burning speed,

  I use usually 4 x.
  The operating system is Windows XP.
  Anyone got any ideas?

  I put t know what CD/DVD drive you have but on the Toshiba site for some readers are firmware upgrades available. Maybe you should try this to solve the problem.

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck!

• Tecra S2: DVD burn problem

  Hi all,
  We are 4 and we have about the same problem when you try to write a DVD with ours, laptops, with nero6 the error message is usually "there was a problem powe offers" or "invalid destination path" (I try to translate it from Italian error code). In any case, on all our laptop Tecra S2, it is quite impossible to write one DVD correctly. DVD TEAC DV-W28E material, the driver being used is by Microsoft

  Thank you all

  Hello

  First of all, it would be very interesting to know if you are using the Toshiba recovery image.
  Second, have you used different DVD and have you checked if this error message appears with other burning programs?

  I checked the page of the Toshiba driver and found an update of firmware for Tecra S2.
  In addition, there is also a DVD ram driver.
  I suggest you to install these applications.

• Satellite C850D - DVD burning problem

  Four months ago, I bought a laptop C850D - 12 L to replace my laptop computer another death.

  A couple of days, I tried to burn on a DVD jpg files; I had not done this before on the new machine.
  Everything seems fine until she reach the finishing process and the disk does not end.

  I tried to fire using Windows own engraving option, Nero and I even downloaded Ashampoo Burning Studio, but whenever I get the same results, i.e. nothing gets burned on a disc. I wasted 12 discs already try all variants of files, engraving, programs, etc., but each of them fails.

  I don't think it's the drive, I think it's a software problem, because * I am able to burn files to a CD *. The player plays also bought the DVD shop so that the part of okay - it's just finish burned DVD that is the problem.

  I downloaded a few programs that may have affected things, (Nero was already on the laptop when I bought it), they are: VLC player and DVD Styler - I downloaded them only that Windows 8 has no creation of DVD as Windows 7 programs don't.

  I phoned John Lewis, where I bought the PC, but they were not able to help, nor were Toshiba, who said it must be a software problem and asked me if I would like to speak to someone else for advice, even if it would cost me. seeing that I have a two year warranty on it, I refused.

  Drivers from the DVD were dated 2006 and a search inside the Device Manager said that these are the latest drivers.

  I went to the website of Toshiba and found a zip file driver, which has been updated in 2013. I downloaded which, to reveal the ten files, three of which are uncompressed application files. I tried to run all three of the latter with no apparent effect. I even tried to search these files when you try to update DVD drivers in Device Manager, but he acknowledged not all ten driver files (mentioned above), even though I copied these to a more convenient location in My Documents folder.

  I would be grateful for any suggestions as to how I can solve this problem.

  Best regards, Martin.

  > I don't think it's the drive, I think it's a software problem, because I am able to burn files to a CD.

  I think you use not entirely compatible DVD disks.
  It was my problem burning DVD disc.

  Recommend test you the discs DVD-R from different manufacturers but I had the best experience using R TDK and Verbatim DVD R

  PS: Windows system using common Microsoft CD/DVD driver. This is why there is no special driver for optical disc player sound is always part of the system.

• Satellite P300-h-13 - DVD burning problem

  Hello foks,.

  First of all, I'm from Holland and my English is not so good, sorry about that.

  I had my problem posted on http://laptopforums.toshiba.com/t5/General-Technology/bd-p/brd_gen and they lead me to him. So I hope that someone here has a solution to train me.
  The form of answers it will not work.

  The form of DVD playback going perfect, but burning no longer works after the first time I burned a DVD with success.

  Hmm seems strange
  Have you tried to delete upper and lower filters in the registry?
  If this is not the case, to do this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the computer and check if you can write to DVD

• Satellite M30X and Mat * a dvd - ram uj-8205 burning problems

  I have Satellite M30x and Mat * one year dvd - ram uj-8205. On the beginning everythinks worked very well, but in the last months of 2-3 that it cannot reads some CD and have problems with CD burning
  I restarted the laptop with the recovery cd, but still the same problems. Before robooting, I used nero 6, thougth perhaps, this is the problem in nero, now using just Sonic record now accompanies the DVD.

  Please anybode help me?

  Hello

  How to help you if you don't mention what CD cannot be burned (original music CD, homes burned CDs, just specific producers, only some files are not readable). Give us more info on this issue.

  Check a little better, and if there is no success is perhaps the defective drive. It is well known that some CD (a cheaper) cannot be burned properly.

• Equium M-50-216. CD/DVD burning problems

  Hello.

  I recently bought the Equium M50. Now, I can't for the life of burn me to CD / DVD.

  Initially, I put this the fact that the service IMAPI CD Burning Com has been disabled. I started and put in place tp start automatically then rebooted the machine.

  However, I can not YET write with this drive. It reads and plays CD and DVD very well, but WILL not write.

  If I slip and fall explore it tells me that the disk is not accessible, and iTunes launches just the disc from the drive.

  I tried several types of CD DVD would be too much...

  Now, like many of you guys I HATE when computers try to tell me I can't do something!

  Is this a problem that someone met before? I tried to browse the forum but you can't really see too that helps.

  Thank you.

  ADIE

  Hello help

  Believe me, I won't tell you that you can't do something, but I really do not understand that you have this kind of problems with the new unit. When you start the machine for the first time that the unit of factory settings and hardware configuration is optimized.

  Toshiba recovery image include SONIC record now software that allows you to create CDs and DVDs. You can remove and install the clean burning as NERO software and it works well. I have gift? t know what you do with your unit and why you do experiments with IMAPI-Service.

  I just recommend you to check the data of the value. There must be C:\WINDOWS\System32\imapi.exe

  If this does not please recover unit with supplied recovery media and enjoy life.

• Satellite M55 - S139 DVD burn problem

  I tried 9 times to burn a DVD.
  I tried several software programs including InterVideo WinDVD came with the laptop, DVDFab Decrypter and those that I use most of the time, DVDShrink and ImgBurn.

  The log of the software indicates success, but most of the DVD will not play back - even on my laptop. Most of them won't open even - it just keeps telling me to insert a disk in the drive.

  Only once, I successfully burned a part of a DVD with InterVideo, and I could play on my external DVD player. But I was not able to duplicate my success (and only partially burned - perhaps InterVideo's just a demo). I tried to save as an ISO image and also just the files.

  I'm using Memorex DVD-R. Can someone help me please! I tried the DVD forums and nobody knows the answer. Is this a hardware problem?

  Here is the log of my last attempt:
  I 18:36:38 ImgBurn Version 1.2.0.0 started!
  I 18:36:38 Microsoft Windows XP Home Edition (5.1, Build 2600: Service Pack 2)
  I 18:36:38 initializing SPTI...
  I 18:36:38 looking for SCSI / ATAPI devices...
  I 18:36:57 found 1 DVD ± RW/RAM!
  I 18:37:33 operation started!
  I 18:37:33 Source file: C:\DVD. ISO
  I 18:37:33 file Source sectors: 1 760 786 (MODE1/2048)
  I 18:37:33 Source file size: 3,606,089,728 bytes
  I 18:37:33 Source file application identifier: DVD Shrink
  I 18:37:33 device destination: [1:0:0] MAST * a DVD-RAM UJ - 841 S 1.50 (D (ATA)
  I 18:37:33 Destination Media Type: DVD-R (disc ID: RITEKF1) (speeds: 1 x, 2 x)
  I 18:37:33 Destination media sectors: 2 297 888
  I 18:37:33 write Mode: DVD
  I 18:37:33 write Type: DAO
  I 18:37:33 write speed: MAX
  I have a link 18:37:33 size: Auto
  I 18:37:33 Test Mode: Yes
  I 18:37:33 BURN-Proof: enabled
  I 18:37:36 filling buffer...
  I 18:37:37 writing LeadIn...
  I 18:37:40 writing Image...
  I 18:59:19 Cache synchronization...
  I 18:59:25 cycling tray after Test write...
  I 18:59:29 operation successfully completed! -Duration: 00:21:55
  I 18:59:29 average write speed: 2 713 KB/s (2.0 x)-Maximum write rate: 2 800 KB/s (2.0 x)

  Hello

  This Protocol of engraving says nothing.
  These problems usually occur because of the CD/DVD media.
  I put t know if you tried, but you should check out the various media CD and DVD from different manufacturers.
  Well, try to use Nero burning Rom program.
  It s a great program and I m very happy

• Pavilion Notebook with windows 8.1: burning problem of the photos on a CD

  On my old computer, it was easy to burn photos to a CD - R. I tried to do it on the Pavilion laptop with windows 8.1 but without success. Try with the office, the message says "windows can't burn to the current disc. Please insert a writable disc in driver E. " But I've been using a disc that worked on the old computer. When I tried it through Media Player, it didn't just start burning once I inserted the disc and no progress has been demonstrated. When I checked the properties of the E drive it showed there's nothing on the disc.

  Hi MMM55,

  If she did not work with Cyberlink so let's try another method. It is possible to burn without using software as if you were in the first place. I've included some tutorials and I think choose USB option is what caused this problem for you. Here's a YouTube video on how to burn a CD and the same thing but in steps written here.

  Thank you

• Dell Latitude D610 dvd burner problems

  Help! I have a computer dell laptop latitude d610. It came with dvd - rom. I bought a dvd on ebay writer who was supposed to be plug-and-play. It plays CDs and DVDs, but when I burn a cd or dvd, it burns fine and they will play in other PC, but will not play in the drive that makes them. There is no sense to me at all. I noticed that after the cd is written he opens the drawer and says to close but then it didn't anythingafter that. It is just a flag in the sequence of burning software saying unable to act. Ive tried different burning programs too. same result.     I have the latest drivers. Any help would be appreciated.

  Hello

  ·         What is the brand and model of the external DVD drive?

  ·         Burning software how do you use?

  ·         Did you try to connect the device on another computer and check if you are facing a similar question?

  I suggest you to uninstall all software burner and install a burner software and check if it works.

  Follow the form of measures troubleshooting article and check if that helps.

  How to troubleshoot problems that occur when you play a DVD in Windows XP

  http://support.Microsoft.com/kb/308012

• CD/DVD burner problems said that it is damaged or missing? Anyone has any ideas to help me solve this problem?

  Hello, I'm trying to fix my burner but I tried to uninstall and reboot my computer to see if the problem might be to set but he told me that my driver cd is missing or damaged, and I don't know what to do besides put my computer back to factory settings. So if anyone knows something I can do like that I don't have to put it back to factory settings it would be great.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: My CD/DVD burner does not work and it is said that it is damaged or missing. How can I fix it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.