CD drive won't burn dvd or read burned dvd but will play store bought dvd

TSSTcorp cd/DVGW-ts-h652m ata device, it's my player to cd for some reason, I can't burn cd/DVDs, but the reader will read these and play them, also it won't read burned DVDs, Noah he reformatted dvd, how can I solve this problem

Advertisement

Hello

Have you tried to close all programs and then insert the disc in the drive?

You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

CD have a tolerance + - and you have to write on the side outside their tolerance. They can be given
However, it is generally more economical to replace the disk.

Several good info here:
http://Club.myce.com/

Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

-----------------------------------------------------------------------

Try this troubleshooting:

Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.

Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.

Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Combo DVD - RW drive won't burn a disc

    All of a sudden yesterday after burning DVDs my DVD - RW combo drive won't burn a disc. I tried to run the Microsoft patch for CD DVD stuff and he said:

    the selected disk is not able to write, if you have multiple CD DVD players try to use another drive, otherwise you may need to install a CD DVD burner to burn with Nero, it says: this device needs a DVD R/W... and the fix format disc, it says the drive is not capable at all.  Also, when I go to the drive in my computer, it shows the drive as a CD drive.  I replaced the Combo drive with a new one and still have the same issues. Help!

    Hi Mkadv,

    ·         Have what Microsoft Fixit you tried?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: CD-DVD combo drives have two lenses to write CDs and DVDs, respectively. First check with the manufacturer of the computer if the glasses are intact.

    Method 2: To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.

     

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems

     

    Method 3: The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.

    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

    http://support.Microsoft.com/kb/321641/

     

    Let us know if that helps.

  • My CD drive won't burn

    My CD drive won't burn a cd, it will try to burn them and then writing on the cd it says: an error has occurred. How can I solve this problem?

    Hello

    1. What is the full error message you get?

    2. what type of disc you are trying to burn?

    3. when the problem started?

    4. have you made changes on the computer recently?

    I suggest you try the fix it from the link given below and check if it helps.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Hope this information is useful.

  • My ts-tb23l hp dvdwbd dvd drive won't recognise dvd-video.

    I have a hp Touchsmart 610 with windows 7 and the dvd player does not read video however it will play music. HP 610-1020 a TouchSmart desktop PC.  any ideas on why this is. brand new unit.

    Hello

    Normally, it allows you to change 4 times and will remain regardless of the area in the fifth. Many DVD players (home systems) are now free players area (for example, in Australia) but the number of optical drives on the PC / laptops are not. There is a software called AnyDVD which allows you to play any area of the DVD and now comics on the PC / laptop.

    Kind regards.

  • Need to burn CDs that will play on MAC

    The CD I burned recently will not play on Mac. my friend it was made with control file using Lightscribe CD - R system.

    The MAC he spits. Please tell me how to make one for my friend (the one who will play!)

    PAM

    I'm not sure if it will work (he says he supports Joliet and Joliet is supported by MAC OS X): http://www.freevistafiles.com/NCH-Swift-Sound-Software+Express-Burn-CD-DVD-Blu-ray-Burner.html for the software andhttp://www.versiontracker.com/dyn/moreinfo/macos/8017 for the confirmation of the MAC support for Joliet (although not all versions without additional software on the MAC except where it is included in MAC OS X.  The software comes with a free 14 day trail (so there is no financial risk and you get to check it for free).  This version of Express Burn Plus includes a trial of 14 days, the DVD recorder but after after 14 days, you can continue to use the CD burner for use no commercial free (but if you want to burn DVDs after that it costs $49.95 more to reactivate this feature).  I could not find any freeware that would do this (unless you can get by with CD and do not need to burn DVDs - it's free.  Vista cannot do.  There is no Microsoft product I know who can do it.  I couldn't find yet another option to provide you (and I spent almost an hour to research - I'm a little obsessed with the search for a solution).  And I mean EITHER DVD or CD (there were two, but they were not compatible with Vista).

    Again, it should work with MAC OS X, but earlier versions will need additional software to allow them to read Joliet (However, at first glance, it seemed that this software was readily available if I honestly did not check - read the second link on MAC support for Joliet for more information and then you can search for "Support of Joliet for MAC" or something like that on Google or Bing (or your friend may-) apres_tout you are doing most of the work and provide records him) he or she has to find and install everything what is necessary according to the MAC version.

    I hope this helps and I hope you can get CDS only then it will be free (you did mention CDs in your post, but maybe you just failed to mention DVD).

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • dvd/cd HL dt st gh15f drive won't burn CDs

    This DVD/CD player provided with my Acert AX1200-ED5200A desktop computer.  The CD/DVD drive will burn DVD but stopped buring CD - however, she plays a CD.  If you insert a blank CD into the drive, it freezes the computer and any program that you use to burn the CD.  I tried to uninstall and reinstall the player - who has not worked.  I looked for new drivers - it has the most up-to-date.  Any ideas?

    Hello Daisiemazy,

    ·         Remember to make changes to the computer before having this problem?

    I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • DVD drive won't burn DVDs

    I have a laptop DV2000 and although the DVD Player reads and plays CD and DVD it doesn't burn a data DVD.  The properties of the driver are so-called "working properly", but I lost many DVDs trying to burn playlists to itunes.

    It could be as simple a problem that do not use white to DVD quality. Learn more about best drives to http://www.digitalfaq.com/reviews/dvd-media.htm

    I suggest Verbatim or Taiyo Yuden discs only.

  • DVD drive won't burn CDs?

    I can't copy of CD. I tried to copy an audio CD by using Windows Media Player 10 and Sonic Record now Toshiba, but at the same time produce an error towards the end of the combustion process.
    I reinstalled the driver DVD and reinstalled Windows Media Player, but these measures are not addressing the problem.
    Someone at - it other suggestions that might help?

    Thanks in advance, monkey

    Hello

    Try to remove the preinstalled software from Sonic and use Nero. I used Nero on many models of different laptops without any problem.

  • s parts, DVD, cd but DVD drive won't burn does not recognize any cd loaded into it?

    I want you to try the upper and lower filter thing (link below). Often, this fixes the problem with DVD burners recognizes only not DVD discs.

  • Satellite P30-145: the drive won't recognise DVD double layer

    I have a Satellite P30-145 with a SupermultiDL DVD player. When I got the PC, I could write DVD double layer with no problems. Now the drive will not recognize DVD double layer at all. Even those from the same box that has worked well before. I use are Verbatim Double layer DVD + R 2.4 x discs.

    After a lot of internet research, I have downloaded and run DVDInfoPro. This application has reported that the Player did not support the DVD + RW DL. Very strange!

    Can anyone help? The drive is a carpet * a DVD-RAM UJ - 831S.

    Hi Lan

    This disc is certainly DL one, but I can imagine that the drive is defective and cannot calibrate lens in the right position. This model of laptop is more than two years, and if you have used this drive extensively, I can really imagine that the DL function is defective.

    What you can do is to clean the lens and see that it will help.

  • I'm running on xp and my media player11 won't play DVDs but will play CD and burn

    don't know if the codex is missing or hardware is broken

    WMP11 already play DVDs?

    Maybe you need a DVD decoder:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Info about DVD decoders:
    Plug-ins for Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins Or you could try one of the following free media players
    who should read DVDs:

    VLC Media Player
    http://www.videolan.org/

    Media Player Classic
    http://www.filehippo.com/download_media_player_classic/
    (just unzip and run it... (no installation required)

    Media Player Classic Home Cinema
    http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
    (works on XP/Vista/7)

    Another option would be to download and install one of
    the following Codec Packs:

    * Proceed at your own risk *.

    (1) news of CCCP (combined Community Codec Pack)
    http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

    (2) K-Lite Codec Pack (full)
    http://www.filehippo.com/download_klite_codec_pack/

    Good luck...

  • My dvd player won't play CD but will play dvd .i have run recovery system, no change discs

    The unit is a HP PAVILION p6107uk desktop pc. When the cd is inserted pc tries to read for about 30 seconds then silence.right click on results of dvd player in windows explorer freezing.as soon the disc is ejected Explorer is ok.apart of the records of restorations that I tried to uninstall the drive and reinstalling, diagnostic tools can not read drive when the cd is inserted , but is very good with dvd.software updated controls say that my dvd drive is up to date. DVD player is a HL-DT-ST-DVD RAM GH40L.

    I am considering buying a new dvd player to see if that solves it, but all hoping a met and solved this problem before

    The player uses different devices for the CD DVD vs.  It could be the laser and/or material for the part CD failed.  DVD players are cheap now, so a replacement won't cost you too much.  I see that the specifications indicate that the current drive has lightscribe, then choose a replacement that has this feature if necessary.

  • Equium A60 will read the cd but will not read DVDs

    Hello

    I got my laptop for about a year and a half, and it suddenly stopped playing DVDs. It reads the cd. I does not even recognize the toshiba boot disk which is on dvd, someone with ideas format.

    Thank you

    Hello

    Looks like a dead drive.
    Possible is not calibrate correctly.
    In my view if these malfunctions seems the best way is to replace the drive.

  • My DVD RW drive doesn't detect program or music cd but will play a movie cd

    My DVD RW drive does not detect the program, music or a blank cd but detects and read a movie cd. I tried uninstalling the driver and restarted my computer, looking for updated driver (said mine is newer), reset to default AutoPlay settings and nothing seems to work. It was when I got to my computer but then I caught a virus and all the hard drive should be dumped and re-installed the files. My drive has not worked for some time now and I don't remember for sure if it was when he left or if it worked fine after that for a while.

    Answers or suggestions would be greatly appreciated... I am running Windows Vista. Could be the problem? Should I upgrade?

    Hello

    ·         What happens exactly when you insert the program CD/DVD or music?

    ·         You receive an error message when you insert the program CD/DVD or music?

    You can check the link for the resolution of the problems with the Windows Vista CD/DVD reader below.

    When you insert a CD or a DVD, Windows Vista may not recognize the disc

    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

     

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

    http://support.Microsoft.com/kb/929461

  • DVD player will not play disc 1, but will play 2-6 What can I do?

    I have Criminal Minds season 1. 6-disc. Disc one just turns and clicks on and will even play open in Windows media, but 2-6 player. What can I do?

    Hello

    Another outside Criminal Minds DVD plays on the computer?

    Try the steps listed in the links below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

    How to troubleshoot problems that occur when you play a DVD in Windows XP: http://support.microsoft.com/kb/308012

Maybe you are looking for


HashFlare