CD/DVD drive, causing the Blue Screen of Death stop

Similar Questions

• Causing the Blue Screen of Death (IRQL_NOT_LESS_OR_EQUAL) wireless adapter

  I had a Linksys WUSB600N Wireless-N USB adapter (dual band ver. 2) for a period of several months now, no problem, running on Windows 7 Pro 32-bit.  So without any hardware or software changes (to my knowledge), have the adapter plugged during initialize causes my computer blue screen.  Unplug, Windows starts fine, but it will crash again in the same way once I plug the unit and it research networks.

  I went to the Linksys site and downloaded the Windows 7 driver for the card (they have even one for as long as I was using Vista all this time), and that seems to help for a little bit.  For some reason any my computer not collapsed yet until I wait long enough after the departure to the top before plugging.  But it's about all or nothing.

  It's the essence of the blue screen message (had to find somewhere else and copy it so not sure the numeric codes below):

  A problem has been detected and windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check that a new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:
  STOP: 0X0000000A (0X00000002, 0X00000000, 0XCDCDCDC9, 0X804DBE7B)

  The date of the beginning of the physical memory dump
  Total physical memory dump.
  For more assistance, contact your system administrator or technical support group.

  I tried to start in safe mode, but it won't work without networking, so I wasn't able to learn something useful about the problem.  I don't have that much experience with technical problems, although I spent a good amount of time working on driver problems.  No help no matter who might be able to give me would be greatly appreciated.

  Some info on my PC:

  Gateway GT5628 (ACPI x 86 PC-based)

  Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz 2.39 GHz

  NVIDIA GeForce 8800 GTS 512 MB

  KB977165 has created various problems on some systems and was temporarily removed from Windows Update.

  I would say to uninstall KB977165 to see if that solves the problem.

• Nvlddkm.sys for my GeForce 6150SE nForce 430 graphics card driver causes a blue screen of death, whenever I look at a video of youtube for a long period of time. I have re-installed Windows 7 Ultimate 64-bit, and it always does.

  I run Windows 7 Ultimate 64 bit, Skype, Teamviewer, client Pidgin, mIRC, Firefox, Kaspersky Internet Security 2010, openDNS updater, iTunes, and Outlook 2007.

  This problem has caused a unbootible machine when it happened first. It stops happening when I uninstall the display nvlddkm.sys driver, but when it gets reinstalled via Windows U [date and I restart, it bluescreens.] When I reinstalled the operating system, I was able to work normally again. I'm afraid that this problem could start again however, please help me.

  Try the following drivers from NVIDIA:

  http://www.nvidia.com/object/win7_winvista_64bit_191.07_whql.html

  Uninstall the video drivers that are currently installed and turn off any antivirus real-time protection before installing the new drivers.

  Make sure that antivirus real-time protection is reactivated after the installation.

• KB2503665 causes a blue screen of death during restart

  I'm on a Samsung Q210 running Windows Vista Home Premium Service Pack 2 and used to have automatic updates enabled. Yesterday after installation of updates, the PC crashed with a BSoD during boot. I used Safe Mode to uninstall the updates one by one, and I've identified KB2503665 to be causing the blue screen of death. I tried to contact Microsoft support, but for some reason any their site tells me my ID of the computer cannot be used in the country, I reside (although I am sure that the version of Vista and the serial number are 100% legit).

  Is it possible to configure the automatic updates as it automatically excludes this update in the future?

  Hello

  1. What is the blue stop screen error message?

  You can follow the methods below and see if it works very well.

  Method 1

  Step 1

  You can temporarily disable the anti-virus.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2

  You can try to download and install the update manually and see if it works very well.

  http://www.Microsoft.com/download/en/details.aspx?ID=26275

  Method 2

  If the problem persists, you can auto hide the update.

  (a) click Start, point to all programs, and then click Windows Update or Microsoft Update.

  (b) click on custom.

  (c) click to uncheck the box next to the update you want to hide.

  (d) develop the update you want to hide, and then click to clear the don't show this update again check.

  (e) click on review and install the updates.

             

   

• How to troubleshoot audio issues cause by the blue screen of death?

  I faced a problem with my audio laptop. This operating system: Windows 7 Home Premium SP1. He has some kind of problem when I watch a movie, I can't hear any sound coming through the speakers, and even when I plugged in a headset, the same thing always happens. The problem occurs after I have reformat my laptop because of the blue screen of death.

  Hi Luqmanmuaz,

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  See this article to resolve the problem of aid:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reference:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• The blue screen of start - stop unknown codes errors

  I use windows XP service Pack 3.  I changed my diet over yesterday with a few errors when trying to start finally started. subsequently had some problems with a freeze up. tried to restart and got the blue screen of death with errors. re installed powersupply old got it up and running again. It tried to boot the pc and blue screen errors again. Put the new power supply in eide cable changed on hard drive. Booted fine ran a few hours and blue screen again. The warning is a windows subsystem process is completed with status 0xc0000005, 0x7e7213ca, and 0x006af5d8. any help would be great thanks Steve

  Error code 0 x 0000005 usually indicates some sort of a permissions problem.  I have no idea how this would bind to a socket well!

  If it works sometimes, if you play inside, do you think you may have a poor connection or loose somewhere?  Are you able to just unlug and reconnect / reinstall everything will be cancelled (without using too much force)?  Just do one thing at a time, so you don't mix...  Unplug it, plug it back, unplug the next thing, plug it back, etc.  You reinstall RAM and video card if you have one in a crack - out them one at a time, put them immediately from whence they came.

  Here's how to start debugging of a BSOD.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Your system seems to start OK and then crash or didn't he start not at all?

  If your system works fine, what do you think might have changed since the last time it worked correctly?
  Can you make the system crash when you want
  ?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).
  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files
  .  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

  Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• need help with the blue screen of death!

  Hey, I recently got two usus strix 980ti and since then iv been doing the blue screen of death when I try to restart my pc and turn off it crashed randomly one or two times as well.

  blue screen:

  Check with your hardware vendor for updates to the bios. Disable the bios memory options such as implementing caching or shading. If you need to use safe mode to remove...

  technical information.

  Stop: 0x0000007e (0xffffffffc0000005, 0xfffff8800554368c, 0xfffff88003938158, 0xfffff880039379b0)

  isub3xhc.sys - address fffff8800554368c base at fffff880054f5000, datastamp 560555f0

  then he dumps memory and reboots.

  any help would be full use thank you.

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible
  even for the Poles that seem identical) and when the faster memory is placed
  in the system behind the slower memory. So it is best to also swap sticks in and out
  to check for those even if all the tests of memory are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top Memory Diagnostics tool
  -Right click - RUN AS follows ADMIN instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista
  Memory Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Pavilion DV9600US video hangs and get the blue screen of death, hardware video message fails

  If this can help others! I have a HP DV9600US it works well but then screen freezes hot flashes and crashes or re-boots or gives me the blue screen of death. Spent hours updating the drivers and the latest NVIDIA drivers without change, all the tests and diagnosis appear normal. When I open IE 9 it hangs then crashes sometimes at the office, tried to change the parameters of res and nothing has worked. I assumed I had a bad video chip. NOT. This all started I thought with IE 9, I changed all the settings of Internet Explorer.

  Here's what I found to solve the problem and I hope this can help, DO NOT updating auto or manual for the new drivers or NVIDA video Windows CE is the cause, I downloaded from the site to shape the 2008 NVIDIA driver HP and rolled, problem solved. I am running Windows Vista 32 bit.

  I post that hope, it helps others and records the days/hours of attachment and not update recommended to the latest drivers that actually caused the problem in the first place. I guess the lesson learned if it works LEAVE IT ALONE.

  Good luck

  Please mark as resolved so other users can see this theard includes a fix for the problem

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• I get the blue screen of death, I do before going to the Geek squad?

  I get the blue screen of death, I then close my pc and restart in safe mode and then trouble shoot. I can then restart normally and then it is fine for awhile. I don't always have to be on the internet to get the blue screen. I have AVG and super anti-spy ware and run full scans and they say that there are no threats. So what else can I try?

  Messages you receive when you restart the computer, more a review of the event viewer should help you determine what is causing the BSOD.  The BSOD is not necessarily related to malicious software.

  You have posted in the forum for the forum of anti-malware for Microsoft Security Essentials (MSE).  Since you're using AVG, your post is off-topic for this forum.

  You can expect from a forum moderator move your message or if you want to, you can seek assistance in search and/or post in the appropriate Forum Windows:

  http://answers.Microsoft.com/en-us

  Kind regards...

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• I got the Blue Screen Of Death with Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Original title: Help, I got the blue screen of death!

  Can someone help me please? Whenever I turn on my computer, it goes to the BSOD. I tried the last settings that worked, but he went to the BSOD too! In addition, safe mode it won't work goes to the BSOD as well. Nothing works. I have to go to a computer store to fix it, or is - it possible to fix it at home? Please help immediately!

  The BSOD I get says:

  A problem has been detected and windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: disable or uninstall all utility defragmentation or anti-virus disk backup,. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /f to check for hard drive corruption, and then restart your computer. Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Hi TheCookeNinja,

  I suggest you run the check disk (chkdsk) of the Recovery Console & check if you are able to boot to the desktop correctly.

  Step 1: To start the Recovery Console, you can follow this link.

   

  To start the computer and use the Recovery Console

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_overview.mspx?mfr=true

  Step 2: At the Recovery Console prompt, type the following command and then press ENTER:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Reference:

   

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I hope this helps.