CD/DVD drive does not work on Satellite L300-01:00 - burning error at 20%

Hello

I have a Toshiba Satellite L300 01:00 there 2Gh processor 4 GB Ram HDD 250 and 3 days my DVD is not written anything.

20%, I have error, so I reinstall OS (Vista Ultemate 64-bit) and the same problem.

I don't know what to do, please give a solution >

Thank you

Advertisement

Hello

I doubt that this could be a Vista or CD/DVV drive problem, I think that it s more a problem of compatibility of the disk.

I recommend that you test some different discs from different manufacturers.
Some have said here that the TDK discs are fine

I tried these discs also and never had any problems burning / writing.

Check it out

Tags: Toshiba

Similar Questions

  • DVD drive does not work on Satellite A200-1 s 5

    After the installation of vista dvd unit is not reading any disk until you restart. To be more precise, from the first moment, I bought the laptop, I try to install ms works disk, but the device did not read.
    I have observed that if the disk was in the unit until the operating system has started the unit has been reading the disc. If I opened the dvd unit and I close the unit (with the same drive inside) I get the message to insert a floppy disk in the drive and the message remained until I restart the operating system.

    I tried to restore the operating system with the DVD, it came to pass, but after installation I had the same problem. I tried with another operating system, windows XP, with all the drivers installed (BIOS included) and the problem still remains. The laptop works fine except the dvd player.

    Can someone help me please?

    Hello

    a suggestion that could avoid sending the machine to a repair center would be to check the download site Drivers Toshiba for an update of the "firmware" for your drive. If no one is available, or the firmware does not solve the problem then you definitely need to send the machine to an authorized service partner because it could really be a hardware failure.

    If you need a link to find the nearest service partner in your country, then you must click [HERE: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and phone an ASP for a chckup/repair of the material that is closest to you.

    Welcome them

  • CD/DVD drive does not work after 8 Win instalation

    Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

    When I put the blank cd and try to open it, it gives me error when opening by saying:
    "windows could not complete the format".

    Who's a software or a hardware problem?

    waiting for help!

    This means that your CD/DVD drive no longer works and is not recognized by the system?

    If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

    + Why my CD/DVD drive does not work after upgrade to Windows 8? +
    http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

    You must uninstall the programs from Toshiba:
    TOSHIBA Recovery Media Creator
    TOSHIBA Disc Creator

  • My CD/DVD drive does not work

    My CD/DVD drive does not work, he plays any kind of disc, I don't think that my computer recognizes that it has a DVD player that more, please help!

    See this knowledge base article http://support.microsoft.com/kb/982116/en-gb

    Remove spyware, etc., can often mess up some registry settings that make it seems that the CD / DVD ROM drive is defective.
    HTH
    Neil
    www.nwarwick.co.UK
  • How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

    I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

    Please send your reply to my email id, or post it here...

    Hello

    Vista is not designed to be installed like this.

    But others led to ways to do so.

    This may interest you on this subject:

    "How to create a USB of Vista Installation key '

    http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

    Google will help you in this matter.

     

    See you soon.

  • E CD/DVD DRIVE DOES NOT WORK

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I am IMPOSSIBLE to GET THE DRIVE E (CD/DVD) TO READ. WHAT CAN I DO TO GET THE PLAYER TO WORK?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

    I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

    Hello

    Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
    1st in the boot order (remember to put it at the time where the fact).

    Then put in a DVD to boot Windows and see if the driver works.

    If it doesn't then it's a hardware problem.

    =======================================

    If the drive has worked in the test above, that these can help:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • CD/DVD drive does not work error Code 19 a dI have tried all the solutions of correction that I can find.

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.

    Hello

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Please make all underneath the same if you've done it before as it's often the total of the process which
    solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Normally the above will solve this problem if not work your way down through them, even if you
    done before.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    --------------------------------------------------------------------------------------

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

    I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

    Download and install the trial version of Lightdroom CC.

    Then enter your serial number, follow these steps

    How to convert a trial CC 6 Lightroom Lightroom

  • Wireless driver does not work on Satellite A30-PSA30E

    All the ideas that is suitable for the above model driver, I downloaded about 5 drivers wireless on the site, but none seems not to work.

    What do you mean with the driver does not work?

    Do you have an error message or what?

    Have you checked if your laptop supports a minPCI wireless network card?

    If your mobile phone does not support an internal WLan card then you will not be able to install the WLan card driver :) very simple

  • Satellite 2430: CD/DVD drive does not work - i/o error

    Hello all Toshiba people.i have recently bought a Toshiba Satellite 2430 for a very good price. One thing the carpet * a DVD - ram Uj - 810 drive does not work when I put in any type of cd or dvd, I get this error
    F:\ is not accessible.
    The request could not be performed because of an i/o error.

    I talked to my local computer Wizz and does everything that he suggested to the letter and still the same problem. He suggested updating the bios drivers and the only way to do that is on a disk drive that she cannot take the an or a CD or dvd drive is not working. Can you please help me!

    Begging you a lot
    Michael Borger

    In my view BIOS update will not change.
    I assume that the reader has worked in the past with the same BIOS version
    It is a drive hardware problem or some registry keys are corrupt.

    I think that it s a hardware malfunction may be a matter of lenses.
    But try this;
    Remove the drive from Device Manager and shut the laptop computer. After restarting again the operating system should recognize the drive again. Then you can check the functionality.

    Otherwise, you can remove the disk from the laptop, and then start the laptop without the drive. Then stop the laptop, put the drive in the notebook and start over.
    The firmware should again loads.

    But if these procedures help t, I don t see it differently as for replace the drive

  • CD/DVD drive does not work on my Satellite L300D

    Hi all
    * I have Toshiba Satellite L300D laptop and my OS is Windows Vista.*
    I don't have any driver cd... when buying. They ask me to download from internet if any necessary driver software.
    Now if I put a cd/dvd is not readable. The option of cd/dvd drive is invisible in the my computer window.
    I renewed my anti virus and checked the laptop. There a few virus and I deleted all the viruses.
    But still my drive does not work.

    What should I do? Also, my warranty period expires last month. I'm not having any recovery cd also.
    Please give me the solution.

    Hello

    Please check if the CD/DVD drive is listed in Device Manager.
    If it s listed, then it means that ODD has been recognized by the Windows operating system.

    In this case, try this;
    -Remove the STRANGE to the list of devices.
    -remove the filters above and below of this registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    -Reboot the laptop

    Usually, this helps.

  • Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

    Hello

    My DVD player does not work.

    There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

    I reinstalled it from the Toshiba site.
    It records in the right place?
    I am Windows 7 64 bit and chose the right driver for it.

    Should I use the 64-bit?
    I have 3 MB of RAM which was the spec when bought.

    If I wanted to change to 32 bit how you take you without the CD/DVD drive?
    Is there any point in doing this?

    Thank you

    Richard

    Hello

    To be honest I m a bit confused.
    You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

    If it of the case, then it means that your CD/DVD drive is faulty.
    Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

    When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
    This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

    If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
    http://support.Microsoft.com/kb/270008/en-us

    Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

    Good luck

  • Satellite A200 - 19L: no sound after hibernation & CD/DVD drive does not work

    First of all, my laptop computer became very slow loading vista after formula 1 week to buy it.

    Second, sometimes when I put the mode 'sleep' a revival of the laptop, there is no sound and a red circle appears over the speaker icon in the bar of tasks, and when I go into control panel > Sound, he tells me that no. his drive was installed and when restarting the laptop the problem resolved?

    Thirdly, after the formula of the week 3 buy the computer also dvd - cd player has the same problem, like the sound and when you open my computer that NO cd\dvd drive icon and when I put a cd or dvd, it does not work or run and it happens all the time, even if the laptop restarts.

    Since then im able to watch movies or work.

    I'm lost and I don't know what to do!
    (Sorry for my bad English, but I hope you understand the problems)

    Hey Osama

    I think I can help you. The questions that appear on your laptop are not serious and the only one associated with software or registry.

    Regarding your noise problem:
    Please check this Microsoft document
    http://support.Microsoft.com/kb/929685/en-us
    or
    http://support.Microsoft.com/kb/937077/

    the MS update must be downloaded and installed ;)

    Regarding the missing CD/DVD drive;
    I think you should try to remove the drive from Device Manager and reboot the laptop. Then the operating system should recognize the STRANGE again.
    Secondly you should access the registry editor and should remove the upper filter and bring back the key filter
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Recommend checking out:
    http://support.Microsoft.com/kb/270008/en-us

    best regards and I hope that I can help you

  • the sound on my my dvd drive does not work

    the sound on my dvd player does not work I see a picture, but nothing here

    Hello

    Determine if 32 or 64 bits.

    Start - type in the search-> Winver box found at the top of the page and double click - check version - if 64 bits, it will say 64-bit.

    After that the foregoing, add codec - get these 32 bit if:

    -Free - CCCP also get free tool of insurgents
    http://CCCP-project.NET/
    http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

    FFDSHOW - free
    http://sourceforge.NET/projects/ffdshow/

    Check here:

    Plug-ins for Windows Media Player
    http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

    ============================================
    ============================================

    If 64-bit:

    Read this 1st and go that route, or use the one below.

    http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

    --------------------------------------------------------------------

    If 64-bit Vista - can run WMP in 32 or 64 bit mode.

    Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

    For 32-bit use these - OR those listed above that I prefer.

    K - Lite Codec Pack 5.0.5 & K-Lite Codec Pack 5.0.5 update
    http://www.codecguide.com/

    Use them for 64-bit:

    K - Lite Codec Pack (64-bit) 2.6.0
    http://www.codecguide.com/

    -------------------------------------------------------------

    You know that you use WMP 32 or 64

    Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
    http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

    ------------------------------------------------------------

    VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

    VLC - free
    http://www.videolan.org/VLC/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for