CD/DVD drive of C50 - A satellite not recognized in Windows 10

Similar Questions

• Your CD or DVD drive is missing or is not recognized by Windows or other programs

  I tried to apply the patch, MicrosoftFixit.dvd.Run.exe. He could not say "NET Framework initialization error. Unable to find a version of the runtime to run this application. If this is related to the framework version number .net (such as published in some issues) then Microsft back compatible fix to the problem. It should give a step-by-step procedure to solve these 2 problems. Microsft say DVD problem was know question and it was fixed in XP SP2. I installed Windows XP with SP2 and now updated to update to SP3. But the problem persists. Any help from anyone?

  shanglur,

  If you have installed all Windows updates, there's no upper/lower filters to delete, you can try...

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  But it's almost the same thing as above. I suspect that your cd/dvd drive may have failed.

  Rick

• CD or DVD drive is missing or is not recognized by Windows

  Original title: another question about the DVD drive is not detected in Windows 7

  I have the same problem that many others have described here on the DVDR drive not detected after installing Windows 7. I still have not solved this issue. But I have another similar problem. The system will not recognize an external USB DVDR drive connected to a USB port. In essence, I have no access to the internal drive (in a Dell Inspiron 1545) or the external hard drive. Without access to a DVD player I can't even uninstall Windows 7, and I can not install or save anything else without a drive. I'm at my wits end. If anyone can help I will shower you with praise.

  Hi Therevmrbill,

    
  Scenario 1:
   
  
  Reference:
  
  Your CD or DVD drive is missing or is not recognized by Windows or other programs.
  http://support.Microsoft.com/kb/982116
    
  Scenario 2:
  
  1 try to connect the DVD USB drive on another computer and check if the problem persists.
  2. try to connect other USB devices to the computer and check if it is detected.
  
  Try to run the troubleshooter and see if the problem is resolved.
  
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter 

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• ("My CD or DVD drive is missing or is not recognized by Windows (Code 39)")

  My CD / DVD is missing or is not recognized by Windows. My driver Version: 6.1.7601.17514, OS is windows 7.

  I received the following message:

  • Windows encountered a problem installing the software driver for your device
  • Windows raise driver software for your device but encountered an error trying to install it.
  • Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I tried several ways to follow the steps that says on the website of Microsoft, as with the help of the hardware and peripheral troubleshooting tool, but it didn't work.  I also used a new external device and was not recognized by windows as well. By the way

  Can you still collect my DVD player?  How can I solve this problem? Thank you

  Run these set the then restart.

  http://support.Microsoft.com/kb/982116

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/316529/

  http://support.Microsoft.com/kb/314060

• CD or DVD drive is missing or is not recognized by Windows or other programs

  How can I solve this problem withot having to reinstall the operating system?

  Hello

  Please try the below mentioned article and see if that helps:
  My drive does not appear in Windows Explorer:
  http://support.Microsoft.com/kb/330140

• DVD drive on the new computer not recognized

  Hi can someone help.

  My computer did an automatic update at the weekend and now the DVD shows also not recognized.
  I thought about uninstalling and reinstalling would do it.
  Now, I can not reinstall so am without a dvd player on my all-in-one which I desperately need.
  Help!
  Any help would be appreciated
  Thank you

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• The DVD - R Matshita Uj-898 is not recognized by windows xp.

  or when run fix - it, the drive is recognized but there is a problem with the installation and in the end, the issue is not fixed-WHAT TO DO - cannot read any CD

  The standard driver does not work, and there is no specific driver for the DVD drive. Microsoft software to fix recognizes the issue but is not fixation ti here is the message that drive is detected but problem with the installation took place, and it will not work properly.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Drive Samsung R720 Blu Ray not recognized in Windows 7

  I have BD E DS4E1S on Samsung R720, Windows7 32 bit. I have installed the Cyberlink software provided with the computer to play the BlueRay disc and it worked fine until about a month ago. Then, I received some updates for Windows 7 and Cyberlink and now when I insert disc BlueRay is unclear, said no. DISK. I did factory restore and reinstalled Cyberlink suite on the same installation CD but it did not help and I still can't play Blue Ray discs.

  Thanks in advance.

  * original title - cannot play Blue Ray discs, just stopped... *.

  Hi Sidnokarb,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/982116/en-us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CD/DVD drive not recognized by Windows all of a sudden

  The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.

  Hi Ranamaska,

  You can follow this link & check if the problem persists:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?

  Hope the helps of information.

• NEED HELP WITH DVD DRIVE DON'T READ DO NOT DRIVE

  DVD player does not try to install a software, but it does not even recognize that a disk has been placed in the pilot. Think that I removed it by accident.

  Hello

  1 does happen with all disks?

  2. you get any error message?

  3. What is the brand and model of the CD\DVD driver?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

  Hope this information is useful.

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• CD/DVD drive not recognized by Windows Vista

  I installed a suite of burningb of CD and DVD on my Toshiba (under Vista Home Premium). My CD/DVD drive appeared more in the computer and was no longer functional. I deleted the program I installed and apparently caused the problem, but it did not help. I have read through the help of Microsoft (929461, 314060) documents and used the Fix - It utility. Also unsuccessful. I discovered the response of Martin, the technical support engineer made on May 5, 2009. I followed his instructions with great success. However, my question now is this: I have still some remains of the problem left over. I get an error message at startup saying, 'InstaBurn UDF driver is not installed correctly. Run the InstaBurn installation program. ' InstaBurn is part of the suite of the copy (hotpics by Nova Development Corp.).  I also have an error message of my reader DVD Toshiba saying that the DVD player does not work - although it is. I played a DVD as a test on it after that I followed the instructions above. How can I remove these error messages annoying that aren't accurate?  Would appreciate any information about this minor - but annoying problem.

  Hello

  Do a Restore Point then you can go back to where you are if necessary although you should not have to:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================================

  Go to Toshiba and download and drivers or programs that affect the CD/DVD drive - Chipset
  and BIOS updates can also play a role.

  For any download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Toshiba downloads - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Then reinstall the programs that you use for this drive.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• The lack of CD/DVD drive - not recognized by windows or other programs

  help-tried several fixes m/s and fix it but did not help. Here are a few messages I get: when in the details of the driver for my Sony DVD + RW AWQ160s - update drivers: here are 2 notches and uncked 2, one by Sonic Solutions and a Roxio time saying no digitally signed (that would be a problem)?  also when I look at update or install the updated driver, after that search, I get this is the best driver for this device - I don't have this device Ouch!  Without my CD drive E work of course I can't even try reinstalling drivers/utilities cd... can someone help this computer incompetent gal?  I'm ready to wipe and reinstall vista I have other problems like IE does not and ms word does not always.  I did go back several times, and perhaps not far enough back but had a Trojan horse and do not want to deal with it again.  thx for any help

  Hello

  (1) would you please provide more information about the problem you are having with word and Internet Explorer?

  Method 1: You may need to reinstall Roxio on your computer, please see the article below for programs that can cause this problem:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

   

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell studio 15 computer laptop dvd drive don't read do not discs in Vista

  IAM using dell studio 15 laptop with vista 32 bit os.my dvd player is not reading any disc

  Pleas give me the solution

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD drive will burn discs and not read the content

  my dvd player will be only burn discs... any time I put in a cd of software or audio CDs, it won't let me veiw content... When I put in a cd of software says "Please insert the disk" and ejects the cd. When I put a CD audo (burned) it gives me just the ability to add files to a cd. thinking it was a problem with the drive its self, I bought an external dvd drive and it does the same thing. I can't understand why he won't let me see or install any content of a cd, any help or point in the right direction would be really useful thanks.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  CD have a tolerance + - and you can read on the edge outside their tolerance. They
  may be released but it is usually more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.