CD/dvd not dΘmarre automatically after Windows update 10

Similar Questions

• 6.20 Skype does not connect in the after Windows Update

  My computer Windows 8 updated recently and since this update of Skype refuses to go since the "signing in" screen. I tried erasing of data from Skype from my computer, and then uninstall and reinstall.

  After trying to turn off the Norton firewall and still not be able to connect, I tried cycling power to my router. Now, I managed to connect properly.

• Presario SR5507F does not start for Vista after "Windows Update"

  One of my friends has a Compaq Presario SR5507F. She is old and doesn't know much about computers. She told me she had a message that an update of Windows was necessary, so she hit 'continue' and walked away. When she came back, the computer was restarted on a screen, she had never seen before: a black screen, with the 'C' and "Compaq" logo in red in the Center, with " and " on the lower left and " and v5.27 ' on the bottom right side.

  I checked to make sure that the keyboard was solidly connected - the NumLock lights etc flash momentarily when the computer starts.

  We have tried pressing ESC, F10 and F11, in various methods: turn on the computer, and then hit the button, turning on the computer using the button is pressed, turn on the computer and repeatedly hit the key, etc.. All had the same result - the screen with the logo of Compaq, and nothing else happens.

  I know that some on computers, but that me stem.

  Of course, she didn't know she should do a set of recovery discs, is not so... she.

  If anyone has any ideas, I'd be happy to hear.

  Hi biolabprof01,

  Sorry to hear about the sentence. There are a number of things to try. First, try the procedure described in this HP support document on Vista won't start do not.

  If you can, try to perform a System Restore or System Recovery.

  If you still cannot start and cannot access the System Recovery Wizard, you can order HP recovery disks (see the section on CD - ROM order page).

  I hope this helps. Let us know how it goes.

• Laptop does not accept the password after Windows update

  Last Thursday my computer set up regular updates as usual.  When I restarted the computer, it cannot accept my password to complete the start-up operation.  I checked that I had the correct password and caps was off.  Now cannot access the laptop at all.  It is configured with Windows Vista, is a computer dell laptop and I bought it at the beginning of 2009. It seems that I never put a password reset disk and I don't have the original installation disc of vista with me - it all happened to be loaded.  Tips to get again access my laptop?

  Hello

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Not found operating system - Windows 7 after Windows Update

  Hi all

  My Dell Studio 1737 was upgraded from Windows Vista to Windows 7 Ultimate in November last year. I have no problems apart from a few minor problems with the DVD player. Last night, ran Windows update and 4 updates before you shut down correctly installed. This morning, I rebooted and the message - operating system not found. I can't access the hard drives or DVD to try a reinstall. By pressing the F8 function key just the fact of restart. Any ideas on how to recover the system would be greatly received.

  Thank you
  Kevin

  KevinHB,
  Are you able to start on the CMOS screen (Dell)?  I think you press F2 during the Dell splash screen.  If you are able to boot to CMOS it recognize your HD?  You have a Windows 7 DVD?  If so check that the DVD player is set as the first boot device, and then try to boot from it.
  If you are not able to access CMOS or the DVD is set as the first boot device and won't start him, then you need to contact Dell, because it can be a hardware\BIOS problem.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lightning will not rise after Windows update 10

  My computer came installed with Windows 7 Professional 64 bit. The computer has a Thunderbolt 2 interface. I loaded the software and the drivers were mounted and worked a lot their use in Garland.

  External drives are USB 3.0 and LaCie thunderbolt. The computer was shipped with the HP security software. I did the upgrade to Windows 10; in the Windows dialog box update, said could not be updated without removing the HP security. I said yes, and since that time, readers not only mount.  After the update, and readers would not mount. I then used system restored and returned the computer to Windows 7.

  When I tried to reload the drivers for LaCie drivers, I get cannot lack of file sysInfo.dll. I download this file, place it in the system 32 folder. After a reboot, I tried and the pilot program installed. However, readers will not rise. I contacted HP and they remote connected to my computer, BIOS update installed, chip set drivers and still drives don't mount not via the port of Thuderbolt2.

  They run a lot when it is connected to the USB 3.0 port. My logic is readers are very much like the mount and run fine with USB 3.0, but is no longer the mount with the crush. I am a photographer and work with large files often 1 GB or more. Thus, the impact of lightning speed is desired.

  I have the drive Professional OEM Windows 7 SP1, however I have a large amount of the image installed and that you hope to find a way to solve this problem without the operating system reinstallation and all the photo editing programs. A pre thank you for everything that helps her.

  Hello

  Thanks for posting your query on the Microsoft Community.

  Method 1: Run System Maintenance troubleshooting

  I suggest that you click on the link below and run the hardware and peripheral troubleshooting tool by following the steps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update storage controller drivers

  Follow the steps below.

  1. press the Windows key + X , and then click Device Manager.

  2. expand storage controller.

  3. right-click on the driver and select Update driver software.

  4 reboot your system.

  I hope this helps. Please respond if you have related research.

  Kind regards

  Jesinta Rozario

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Satellite L750/755 - no connection after Windows updates

  HI, I have a brand new L750/755. network card is atheros.

  There is no way to connect to the internet after you install updates to windows (85Mo, framework 3.5.1 security updates).

  Computer laptop will always find any accesspoints, but connect only with limited connectivity or no internet access.

  I had to restore the laptop before the updates installed to solve this problem.

  How can I work around this problem, or if not how can I get these updates to stop installing on close?

  Thanks in advance

  PS I had already tried installin the latest NIC drivers, change the power settings and connections to all other routers. nothing has worked.

  > I had to restore the laptop before the updates installed to solve this problem.
  Do this and after having done this only automatic disabling Windows update. When you manually do Windows update, install important updates only. Before you begin to update the optional check listed and disable updates updates of pilot.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• No Internet after windows updated August 18.

  No Internet after windows updated on August 18, to return from vacation.

  System Restore to 8 August which worked yesterday and restored internet, but when you sign in today update windows automatically installed and once again no internet no access. Computer won't let me restore of the system now well I tried different dates - said the system restore could not replace the file (c: Windows) with the original copy of the restore point - an unspecified error has occurred in 0x80071a90.  Still no internet access.  Any ideas please?

  The KB2705219 update could be the cause and uninstall that solved the problem for some users.

  But...

  In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.

  I have McAfee, but the connection has started working again on its own so I thought I was clear of problems.  However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually.  So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated.  Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].  My home network has survived without any new replacement set - firewall Windows just took the right settings without any complaint.

  I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• slow after windows update

  Hello
  After windows update:
  my PC slowing significantly
  Windows search sometimes opens spontaneously
  pages (explorer) sometimes becomes white and the icons disappear and takes a long time to be closed
   
  I have ms security essential and it is updated, so I do not think that my system is infected.
  Thank you.

  MajidNavabi,

  • See the following topics

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us >

  http://support.Microsoft.com/FixIt/ >

  06/28 / 1106:37: 19 am

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.