CD DVD problem

Similar Questions

• DVD problem - all disks blank display

  WIN XP SP3 plus all updates.

  It is a follow-up to discussion groups.

  In December 2009, I bought a new LiteOn IHAP322-22 x DVD.

  I recently used my drive OEM XP SP2 or it to start my computer I get intermittent BSOD so I have been using a disk iso boot if necessary.

  A few weeks later he land at the stop, it is up to the provider.

  Have been able to start the computer without the need of the boot disk, I took the opportunity to make a backup with the new dvd.
  After having done that, I checked to see that everything was safely on disk only to find it's blank - nothing show.  I put the disk in a laptop and all backup files were there.

  I tried different types of discs, DVD video, music video,
  other backup discs and discs of recorded and all text are empty.
  I also checked in the hardware Manager - device working properly - no warning - tried to update driver [Microsoft 5.1.2535.0] but the one I have is - this - no driver for restore.  Tried the troubleshooting and not help.  Uninstall/install any help.  Lite we confirmed, I got the correct driver.

  I returned the object under warranty to the supplier - I have been informed that the dvd was defective - new one sent.

  This has had the same problem as that returned.  NO2 has been collected and even once has been tested and found to be defective - new one sent - same problems - No3 collected and have the same problem as the others.  [Has been said that the next [4]] would be tested before shipping.  No. 4 did not operate either. The box has been opened so presumed it had been tested.

  Upon receipt of each new article I did the following -

  Ckecked in device - no display problem - tried the "convenience store" - negative management.  Uninstall/install driver - negative.

  I tried run/regedit entry-
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  But there is no superior or showing lower filters, so couldn't edit/change etc as per-
  http://support.Microsoft.com/kb/982116

  A ran MS FixIt [could not fix it]

  I deselected the digital audio playback - did not work.  I am informed that this drive does support DAP.

  Whenever I get the same error event-

  Event type: Information

  Event source: redbook

  Event category: no

  Event ID: 10

  Date: 20/07/2010

  Duration: 01:01:27

  User: n/a

  Computer: XXXXXX-166E603

  Description:

  This drive has not been shown to support digital audio playback.

  I tried other FixIt to a Google but nothing works.

  I hope the slave of this latest dvd to another computer soon.

  Damascus

  Hello

  You can Google DVD decoders and find several good ones. One is usually supplied with the system
  or the CD/DVD drive.

  You are right that sometimes it's easier to re - install Windows however most of these CD/DVD problems
  can be fixed in a step or two. Sometimes, nothing works except a re-installation.

  Only you as the person who initially started the thread or a moderater can mark this thread as
  responded. Even if I could score I don't know that if all answers must be marked.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• New burn to DVD problem in EP - 12 - get this error: '.\Vobulator\TitlePlanner\CVOBUPlanner.cpp, line 331. '

  Had problems recently with

  PE - 12 does not project load existing; now are asked to record the trial version

  created by A.T. Romano in Premiere Elements - see the discussion complete

  Saved this project by working from a project file "AutoSave", has managed to 'Turn on' the software and continue this project and launch new projects.

  Now came across this question in a new project when you save a DVD with menus simple, provided... models burn to DVD problem in EP - 12 - get this error: '.\Vobulator\TitlePlanner\CVOBUPlanner.cpp, line 331. '

  Before the "Activation" problem I had burned several DVD with and without menus/authoring...what has changed?

  Any help on this?  I have seen this error on the Adobe Encore forums as well...

  Thank you for your support.

  Mercenary of digital media

  The name never give up...

  a. I have not given up on stop markers yet... Please delete the timeline stop markers and determine if that Vobulator error is always present.

  Have you looked at the spacing between menu chronological markers, set up transitions and titles?

  Thanks for the follow-up. Keep a positive thought for the markers of the judgment in general or too close to the end if this is not the end.

  RTA

• Pavilion 2 detachable x: external DVD problems

  Hello

  I bought a Samsung SE208 external DVDRW use the USB port on my full size tablet. It was purchased primarily for watching DVDs while working there and copy my music in iTunes.

  I plugged the instructions and immediately stuck a CD that has been copied to my library without problem. So, I got a DVD to watch (flushed away if anyones interested) and its here that the problems seem to start.

  With a DVD in the drive, you can see this whirring away and my Tablet produces occasional beep noise. It does not display messages and nothing on the screen indicates that the DVD will play. In Device Manager the DVD player is not. It shows as installed correctly when I managed to catch him and look in the properties, but the driver is for a CD-ROM drive only. I tried it on my laptop (6 years) and it works perfectly. The laptop is running Windows 10 too, but shows a bunch of different drivers in Device Manager.

  Ideas, suggestions, new uses for it would be appreciated.

  Thank you.

  Rob.

  I just tried the drive again and it won't play CD's. Maybe it'll work as a lead only which is useless, or ornament for me. Any suggestions?

  Hi PeerOne.

  Thanks for the reply but I have VLC and it still doesn't work.

  It turns out that the SE208 is announced as compatible on a certain website large companies USB3.0 is not something of the sort. With a result pretty obvious.

  Needless to say that the offending article was returned and the search for an external DVD drive VFM who will work with USB 3.0 continues.

  Rob.

• Satellite L50 - A - 1 6 - DVD problems after upgrade to Windows 10

  As the title, the player is normally recognized by the system, but put any media in the drive is not read and that is why it is always empty.
  What could be the problem?

  Thanks to you all

  I guess saying DVD player you mean the STRANGE-> optical disc
  First I would recommend you to check this page for troubleshooting MS:
  https://support.Microsoft.com/en-us/...drive_problems

  It fixes the problems with CD or DVD players that cannot read or write media

  In addition you can uninstall/remove optical drive from Device Manager.
  After the new reboot, Windows system must be able to recognize the STRANGE new and usually the most recent driver must be installed also.

• Satellite L30: Watch DVD problem - slowly and the sound is distorted

  Hello!
  I have a Toshiba laptop Satellite L30-115. I use WinDVD preinstalled to watch DVD. everything was fine until yesterday. Since then, my DVD drive seems to have problems with playback of DVD movies (original).

  It's a little slower that should be, and the sound is a bit distorted. The same DVD my laptop no problems to play now, it seems impossible to play properly.

  I tried system recovery to date, everything was good, but that did not help.

  Everything's fine, when I play movies from my hard drive, but apparently my DVD Player cannot play fair.
  I tried various combinations (turn on/off digital playback in Device Manager), but nothing seems to work.

  No idea how to fix?

  First of all, give it a try with cleaning the lens of your DVD player. Several times a lens dirty or CD/DVD that makes impossible to correct read causing delays.
  Because the movies read from the HARD disk correctly, it does not seem to be a related problem of codec, but... you should still try to use other DVD player software to ensure that WinDVD is not the source.

  I suggest you also to keep longer, to install software of reduction of CD speed during normal use of all the days of the life of your drive. As you know, the disc spins a lot faster than actually required inside the car which complicates the procedure for reading (especially on the scratched CD) and consumes more energy, too.

  Reduce speed solves problems like the one you have several times. Here is a link to the Version of acoustic silencer of TOSHIBA 1.00.008 (from page of the pilot satellite L30), give it a try:

  http://support.toshiba-tro.de/tools/satellite/sl30psl33/XP/acoustic-silencer/acsil-PSL33-XP-100008-en.zip
  (This software runs independent you have European/American version of laptop L30, even on a different model as Satellite Pro 6100 a.s.o..)

  Kind regards
  chain

• A60 burned dvd problem

  Hi help
  Bought equium a60 to burn DVDs using clone, but after about 40 min when watchingburned the picture begins to break up and him freezes

  Hi Kat

  I use the Nero Burning software too and it works great. I t n have no problem. In my notebook, it is DVD multi burner, and I can burn CDs and DVDs successfully. I put t think Hat overheating may be responsible for this.

• Tecra S2 - write on DVD problems

  I have a Toshiba Tecra S2 under XP Pro SP3. He has a stack * a UJ - 831S - DVD - RW drive. I have long written files to the DVD-R and RW - simply by drag-and - drop in Windows Explorer. I've updated to SP3, a few weeks ago, and now I find that while I can read previously recorded or original DVDs and CDs without problem, I can't do anything with blank DVDs. When empty, the drive appears in my computer as a DVD RAM drive D:, but when I put in a blank DVD, it changes the description of the CD player, and when I try to access the DVD, I get the message "D:\ is not accessible. Incorrect function ". As it should be for the DVD, the CD registration area is not checked in the properties of the drive.

  I don't know if the problem is related to the upgrade to SP3 that I have not used the DVD player immediately before and immediately after the upgrade, but I don't have the problem three weeks before the upgrade when the last, I used the function. I used Device Manager to confirm that the most recent driver is installed for the DVD player. If I start the software Sonic RecordNow, that I can write on a DVD without problem - it is just the ability to drag-and - drop in the Windows Explorer that has been lost.

  Any help gratefully received.

  Alistair

  Try to delete upper and lower filters:
  http://support.Microsoft.com/default.aspx?ID=314060

• Salellite 5205 S505 CDRW / DVD problem

  Hello
  I have a problem with a CD - RW,-he does ' t burn a cd :(
  but it reads DVDs and CDs
  I tried to burn a CD with Nero and got a massage with power calibration error.
  Do you know how to fix it?
  Thank you

  concerning
  Keczab

  Hello

  The "power calibration error" message is a problem that occurs with the latest as older CD burners. These means of error message that the CD burner cannot write in the blank CD - R, as it can t match the output power of the laser power to write the CD - R. This can have various causes.

  You can try reinstalling the burning program.
  If you use the Nero Burning ROM of Ahead then the first thing to do is to try to update the ASPI driver This driver is the link between the software and hardware of a CD writer. Google, a little bit on the internet and you can download the driver ASPI try also Nero and research's official website for driver ASPI It must be there for free for download.
  Many manufacturers include identification of the different CD - r codes in the software in the CD burner. By these codes the CD writer can determine the maximum speed of writing to CD - R and adapt the necessary laser power. As the codes of identification on the CD - r can change and the engraver can t know anyway latest brands of CD - R, this can be a cause for the "power calibration error".

  Update the firmware of the CD writer can be the solution in this case. Manufacturers usually offer these updates on their Web sites. You may also find additional tools that might be needed for the update, but also manuals on how to upgrade the firmware.
  It is also possible that the laser unit has become dirty dust over time.

  I hope these suggestions help you solve your problem.

  Good luck!

• Satellite 1110 - Z15, CD - RW, DVD problem

  Hello
  I have laptop Satellite 1110 EN - Z15 and problem with
  Carpet * a DVD/CDRW Ujda 730. It does not read the DVD rom that is saved, he reads only original DVD.
  I can't update driver and do not know what to do.
  Thank you in advance.
  Natasa

  [Edited by: admin on 7 January 05 20:01]

  Hi Natasha,.

  The same thing happened to me, but it was my fault. My DVD-ROM can read just DVD-R. It is not possible to watch movies recorded on DVD + R. Please check if your DVD-ROM can read all formats.

  Good bye

• DVD problem after installing Win XP Service Pack 2

  After installing XP Service pack2 son of college clicked on a question about activation of WinDVD 5 for Toshiba and now my DVD does not load the program. How can I fix it, remimbering I need help step by step?

  WinDVD is the least of your problems: WinXP SP2 should be installed no later than October 10 2006!

  If the computer running Windows XP Gold or SP1 until earlier, may not be a critical functional application of antiviruse protection installed and 3 + years of security updates have not been installed.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 [1] needs to be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ================
  [1] extended for WinXP SP2 support ends July 10, 2010. After this date, the computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates do not work, and site Web Windows Update won't be available until SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 DVD problem

  I use Windows 7. before that, I could read whatever it is on DVD, movies, or files. However, after reformatting my laptop, I am not able to read or burn files to DVD disc. How to solve this problem, while I am able to burn files on DVD and at the same time serve as a USB driver?

  a plus, when I want to format the DVD + R empty disk to be used as a USB driver, he couldn't. How to solve this problem?

  Hello

  Try to copy the contents of the CD on your desktop and then try to install the program and check if it works very well.

  Try to run the hardware troubleshooter and check if that helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter (http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter)

  Also, follow the link below and try the suggested steps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• CD-RW/DVD problem

  Samsung CDRW/DVD SM - 348B is no longer read discs or recognize a disc in the tray. Microsoft Fix it has not fixed the problem.  All of the suggestions.

  Hi Bahsohpc,

  • You have any third-party CD / DVD burning software installed on the computer? (Like Roxio or Nero).

  Since the fix, it has not helped, you can follow the steps below and check if this can help struggling reading CD / DVD edition.

  You can access the link below and try other steps mentioned in the article outside the race fix tool and check if it helps.

  http://support.Microsoft.com/kb/321641

  If other operations is not enough, you can try to navigate to the following location in the registry editor, delete the upper and lower filter keys filters and check if that helps.

  a. Click Start, and then to run.

  b. in the run box, type regedit, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (c) in the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  d. in the pane right, look for UpperFilters and UpperFilter keys and select it.
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry.

  e. in the Edit menu, click delete.

  f. When you are prompted to confirm the deletion, click Yes.

  g. exit from the registry editor.

  h. restart the computer.

  Note: Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps in the KB Article:http://support.microsoft.com/kb/322756/

  I hope this helps. Let us know the results.
   
  Thank you and best regards,
   
  Srinivas R
  Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• His DVD problem

  I have sound on my computer with the exception of the DVD & I don't know what else to check.  I used the fix from Microsoft for sound & there are 2 problems, but I can't seem to solve this problem, even if it seems easy.

  Thank you.  Turns out that I tried to use Window Media for DVD, but there was another program DVD that has been settled by default & I wasn't aware of this.  All fixed now :)

• DVD problems

  I stuff the creation of a DVD and first of all I could save it and playy back but now when I try to create it I got a message that says cannot creat DVD error sycronizing. I wonder if it has something to do with the amount of 598 pictures. His images of a church construction project and I have photos from end to end is that the reason?

  I stuff the creation of a DVD and first of all I could save it and playy back but now when I try to create it I got a message that says cannot creat DVD error sycronizing. I wonder if it has something to do with the amount of 598 pictures. His images of a church construction project and I have photos from end to end is that the reason?

  ===============================
  It is a lot of pictures, but should not be sufficient for
  cause the software to fail. All the pictures are saved
  on the same drive DVD Maker is running?

  There is a slight chance that disablng would be all filters
  Help... see the section "What To Do In Case Of Issues" of
  the following article.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

  Alternative...

  Could you try make the video in Movie Maker and
  Save it in the. Video WMV format and then import the
  . In DVD Maker WMV video file?

  In fact, you could create maybe 4 Movie Maker projects
  each approx. 150 photos and save each of them as. WMV.

  Then when you import into DVD Maker each video clip
  should become a scene (chapter) on the DVD.