CD/DVD read only the dv7-1245dx
I have a hp pavilion dv7-1245dx. He stopped to read the cd/dvd. How can I fix?
Hello
First, try the automated Microsoft fixit at the link below.
Check if the drive works now.
If the drive does not, in the Start Menu, open Control Panel and click Device Manager. Click to open the IDE ATA/ATAPI controllers. Right-click on the first channel and select uninstall. Do not delete if requested drivers. When uninstalled repeat the process for each channel. Also, if an ATA controller is listed, right click and uninstall it, once again is not removing the drivers if requested. Then, open the CD-ROM/DVD-ROM drives. Right-click on the drive and choose uninstall. Do not delete if requested drivers.
Restart the computer and let Windows reinstall devices. Check the disc again.
If it still does not work, re-run the fixit automated Microsoft at the link below.
Then, in the Start Menu, open Control Panel and click Device Manager. Click to open the CD/DVD-ROM drives. Right-click on the drive and choose uninstall. Do not delete if requested drivers. When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar). Let windows reinstall the disc and see if it works now.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
HP DVD Writer does not read or write DVD, but only the CD
My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.
CD/DVD players use different lasers for reading/writing DVD from the CD. All indications would point to your laser DVD as having failed. You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.
HTH,
JW -
Read only the virtual disk?
Hello-
I have Vmware Server 2 x86_64 installed on my Hardy Heron Ubuntu 8.04.2 Server x86_64 and it seems to work very well. I have created a virtual machine for Slackware 12.2 and put the DVD iso, Slackware in the right directory. The virtual machine starts the DVD fine and I started the Slackware Setup. However, when I went to set up the hard drive with cfdisk (part of the standard installation process Slackware) I noticed two things:
1. the drive has been turned ReadOnly, so that I could not score; and
2. I created a virtual disk of 11 GB, but in cfdisk he only appear only 4.7 GB.
What I am doing wrong? Any help would be greatly appreciated.
Thanks in advance.
Well, I'm just guessing because I haven't worked on the software you're talking--can be the partition its display corresponds to the DVD player itself as the DVD is normally read-only and the size of the disc is 4.7 GB. .. You can check it out please.
Points of reward if you find useful response
-
Read only the SPI using the box USB-8451
I am using the NI USB-8451 box to read the SPI of a Honeywell digital pressure transducer data. The difficulty comes from that part of Honeywell uses only the SPI in half-duplex mode, meaning that it only transmits data, but does not require anything beyond the appropriate chip select signal and SCLK to start transmitting its 32-bit sensor data. To facilitate experimentation with the sensor, I bought a USB-8451 SPI Interface thinking I could easily configure the 8451 to read data from the sensor.
However, if I understand the situation, there is a problem. The 8451 considers full duplex data, i.e. a data word must first be sent to the SPI device in question before the unit will start to transmit back data of its own. And since the MOSI data writing periods, since this particular device starts transmitting immediately once a clock is applied, synchronizing the unused address data will cause the unit will return its data before the 8451 begins listening for data in return. The call used by the 8451 to write read action can be divided into the individual reading and actions of writing of any kind that I could discover.
Can someone tell me if I missed something in this operation or if there is some quick tips, that I could use to be able to use the 8451 therefor? Thank you!
Doug G.
Exactly correct. It's nice when things are easier than expected. Hope it works as easy as it sounds.
-
Original title: change read only document___
In Windows7 Home 64 bit, I'm editing a document "Hosts" in System32 > drivers > etc >
It comes up with "you don't have permission to save in this location...".
I am registered as an administrator and I can't seem to change the blue box 'read only '.
I went to the command line using "attrib" but the answer is "no recognized internal or external command".
Help!
John
Hi John,.
Step 1: Follow the steps mentioned in the article below, which deals with a similar question
You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
http://support.Microsoft.com/kb/923947
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Burns maker Windows dvd only the aspect ratio 4:3, even when the value 16:9.was ok in vista, but not the case in windows 7 too movie maker in windows 7 is garbage.this pure direct essential bundle is rubbish.why should set us up with that? I bet that there is no answer. tried to download older versions of movie maker work. but you get directed to this essential live bundle .any way this isn't the end of the world.as, I did a few dvd place pods...
Always the same question on 8 January 2015. Windows Movie Maker produces video files in 16 / 9, but Windows DVD Maker that requires to 4:3 when burning a DVD, regardless of the settings.
Again, I tried severale time and again on April 24, 2015, the ratio has to be 4:3!
Too bad because I like the creation of DVD menu.
I found the solution... very simple and it will work every time. before you burn the DVD with windows DVD creation, make sure you 'exit' your video to mpeg2 format, no matter what software you use to edit your videos, make sure you "output" your finished video in MPEG2 before burning with windows DVD maker
MPEG2 is a DVD format that windows DVD maker recognizes and so it will burn your video ratio 16.9 this video will play on any DVD player. AVI WMV formats won't work even if you copy with movie maker then MPEG2... This is the key ~ MPEG2 ~ that's the secret.
Unfortunately, Movie Maker stores projects only as MPEG-4 (.mp4) or Windows Media Video (.wmv).
If your solution is another problem. We should convert mp4 or wmv in MPEG-2, how?
Why Windows has no simple and direct way to burn DVD screen wide ratio?
-
Format/erase how to read only the sd card.
The card had already switch to unlock. When try to formatting so that send the message that this is a read-only. The map equipped with old data GPS which must erase and reuse the card.
Rastafario
So it is probably locked by Ford for GPS use only.
-
Conditional read only the rows in a table
We have a requirement only under a certain condition (which may change each line), a line can be read only or editable and are uncertain how to implement this with APEX
for example, lets say a table has the following features
columns: ID, Date, editable
1, September 12, 2015, Y
2, September 15, 2015, Y
3, 18 September 2015, N
4, 19 September 2015, N
5, 22 September 2015, Y
Thus, when this data displays on a page in a tabular presentation, the date ONLY are editable for lines 1, 2 and 5. For lines 3 and 4, the date cannot be changed
In the ADF, we get this by setting the attribute readonly on the date component to "row.bindings.Editable.inputValue =='N" ""-this would be evaluated by line and switch read only one or off for each date listed in the table.
Help, pointers would be greatly appreciated!
See you soon,.
Brent
Here is a link to a starting point: dynamic Action on a tabular presentation. Jeff Kemp on Oracle it shows how to condition the unalterable columns. The same logic would apply only to a line level...
Thank you
Tony Miller
Los Alamos, NM -
Read only the terms - master detail
I have a page with a master detail
I created a read only condition and the master passed to read-only, but the detail does not...
Why? Is not possible to put the retail component 'read only '?
Hello
If I understand, you want to the form is editable when the user is an admin user
and read only when the user is a normal user.
You can solve this problem by the use of dynamic actions
to enable and disable some elements of this region (s)
make this condition (standard user = admin = enable and disable)
Another solution
When do the master / detail with the wizard choose change details on a different page
On the link change, you can set a condition (visible only when the user is ADMIN)
Kind regards
Frank
-
Read only the af:inputText rendered as "merged" instead of read only entry
I use JDeveloper 11.1.1.6.0
I noticed that when you use components such as "af:inputText" and "af:inputDate" with the attribute "readOnly" set to true, rendering resulting is a label as a "< span >" as opposed to a read only < input > element which I expected. I see the behavior expected if I use the component 'h:inputText' of JSF with "readOnly" set to true, however, I can't use the JSF component because it is not as if I can get the 'autoSubmit' behavior to work with the JSF component then it will not work. To add to the strangeness of the behavior, if the af: inputText has its lines attribute, the value is greater than 1, it will be rendered as a read-only < input > element as opposed to a label.
In addition, default readOnly to the af form: inputText seems obvious when using the simple skin or other skin based on simple. It adds a box which surrounds the exact length of the text in the inputText rather than the amount of space the inputText would have used if it wasn't in "read only" mode.
Is it possible to get the af correctly: inputText to make as a reading introduced only as opposed to the label that he is displayed as?
Thank you.Hello
It's a decision taken by the rendering of the component. If it is a problem for you and if you have a support contract client then you can file a service request for a change.
Frank
-
SOA Suite read only the console in 11g
Hi all
Is it possible to create a user with read only role on EM 11g? We want to create a user to monitor the production environment to have options to deploy/undeploy.
Thank you.By assigning a role to a user, you can restrict its access-
http://download.Oracle.com/docs/CD/E17904_01/integration.1111/e10226/appx_roles_privs.htm#BABIHDFJ
http://download.Oracle.com/docs/CD/E17904_01/Web.1111/e13747/secroles.htm#i1206135
Kind regards
AnujPublished by: Anuj Dwivedi on February 22, 2011 21:12
-
I just dated windows from vista to windows7, when I went to play WOW, I got an error message because a read only attribute was introduced thyat opposes writing data to files. I read several answers and tried everyone. I can't always reset this secret attrtibute, whats Suur or should I go back to vista if I can.
SUCCESS, IT WORKED!
Reinstall your games in one that is NOT located in Program Files. -
Satellite P20: Device DVD Player reads only the DVD but cannot burn CD & DVD
Hello
I have a toshiba P20, and I'm having a lot of problems with it. One of them is my DVD UJ811. I don't really know what is happening, the drive was already replaced and a few weeks later, it was exactly like the front, and the service provider made me pay almost 70EUR for a budget of 400EUR rejected.
I would like to know what really should do, I can't read the CD and I can not burn CD/DVDs, I can just read DVDs, nothing else.
I have seen some forums on the net, too many people in the world has the same problem I have and I really need to know what is the best solution for me.
Thank youHello Rafael
I'm very surprised by your post it here because I've used Satellite P20-303 (a red) about two years. Laptop is now used by my brother and it works perfectly. I don't really know what problems you have, but I never noticed anything suspicious. Up to now I removed the cooling Grill on the bottom twice to clean the unit, and that's all. After that laptop computer cleanup runs a lot more quiet then before.
Back to ad: I have to be honest and say that I traded with TEAC DV - W22E DVD - rom. original drive was DVD - RW and TEAC DV-W22E DVD-RAM. My brother use it pretty extensively, but until now there is no problem at all.
I don't really know what the service is doing, but if possible replace the drive TEAC one. I can tell you with certainty, it works very well. Moreover, according to the description of your problem, I am sure that the drive is faulty.
You can replace one. It's very simple to do. -
Satellite L855-B511 - after that upgrade Win8 ODD DVD read only
After upgrading my TOSHIBA Satellite L855 B511 to 8.1 of Windows... Optical discs (GT80N) now can only read and write DVD only... any other CD appears empty.
I tried to reinstall windows 8... the driver works correctly.
Still... after the second time the upgrade to 8.1 it plays DVDs only.The link below is for the information of optical disc from my laptop
https://scontent-b-mxp.XX.fbcdn.NET/hphotos-xpa1/v/T1.0-9/10933726_772055249497756_5641341190716491979_n.jpg? Oh = 59e01a361bdd9a81dd61e137a24bf543 & oe = 390-5522Hello
Have you tested with different CD? CD of original music for instance?
I don t know what was an original OS with this machine, but I assume you guessed it with Win7. Are you sure that your ODD works properly with other Win7 100%.
-
Reading only the numerical value of data packet?
I have an entry that gives me: 122345, %, 0000 0000
I want just the 122345 part so that I can graph the value in real time as data are to be listened to in the computer. How can I choose for this? Now I just have a straight read command and read buffer indicator, I did just unroll the package according to the number of bytes I tell her to read.
Watch the channel for several functions in the palette of the format string. If the values are always integers, and always at the beginning of the string, the decimal string to number feature will work without extra effort.
Lynn
Maybe you are looking for
-
RoboForm toolbar comes and goes
I use Firefox 14.0.1 with 7.7.7.8 RoboForm toolbar extension. Sometimes when I open Firefox, the toolbar appears, but to others it isn't. There seems to be no rhyme or reason for it.
-
List of exceptions of the blocker is disabled at startup of Firefox 3.6.12.
Whenever I have allow pop-ups for a website, the specification to allow block pop-ups for this Web site is lost after reboot. For example, when you start Firefox, the blocker exceptions list is empty.
-
My computer says "a problem has been detected and windows was shut down to avoid damage to your computer. PAGE_FAULT_IN_NONPAGED_AREA. If that it the first time you have seen this stop error message, restart your computer. If this screen appears agai
-
HP ENVY - 15t Slim Laptop Quad: will I Windows 10 32-bit or 64-bit when I update?
Hi, I'm going to the HP Envy laptop and it will come with 8.1 Windows 64-bit. I'll put the lapotp 10 Windows. I get the 32-bit version of WIndows 10 or the 64-bit version of Windows 10?
-
HP officejet Pro N911a 8600 I'm trying to print on our pre printed forms, size 5.5 "x 8.5" (fill in the blanks) of Office Word 2007. We have about 35 documents to print from. It does not start with the first record on the tenth record. The first reco