CD dvd - rom has stoped working

Similar Questions

• My CD-ROM/DVD-ROM does not work

  My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
  1 device state poster (this device cannot start. (code 10)).
  2 update driver... shows that the best device driver software is already installed.
  3. it is the driver of manufacturing.
  4. I tried the microsoft fix it downloads and it has not solved the problem.

  Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

  Grateful for any advice...

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Internal mic has stoped working

  The internal mic on my computer laptop HP Pavilion touchsmart has stoped working.  Nobody can hear me on Skype and I can't make recordings on other programs, so I know its not only Skype.  How can I get that back?

  @ropro

  It is the newest audio driver custom for your combination of model and the operating system for laptop. You can download this (which will begin when you click on the link) and then uninstall your current driver, reboot the system, and then install the downloaded driver.

  Driver Audio of IDT high definition (HD)

  The link I gave you, for the resolution of the problems of micro there a difference?

• Equium A210 - after that set BIOS to update the DVD player has stopped working

  Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

  I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
  Someone at - it solutions for getting the DVD drive working again?

  Thank you

  Hello!

  The CD/DVD drive is listed in Device Manager? You see an error code?
  If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

  Try to load the default settings in the BIOS.

  Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Bluetooth in satellite C660-10V has stoped working

  Hi, my bluetooth has stoped working for a week.

  Time I changed my internet modem rather USB adapter, I can't reactivate my bluetooth.
  On my screen is the message of our Lady: "interface power supply is cut off.
  Its imposible to turn it on, by the function key + F8 does not work 'Bluetooth Wizard.
  In a Deputy bluetooth option is shown 00:00:00:00:00:00 to address equipment.

  Please help me with this problem.
  Marcin

  When you use the key combination FN + F8 is BT option available or not?
  If so, what happen when you try to activate the BT?

  To be honest I don t understand what you did exactly.

• Skype has stoped working error

  every time I start Skype after 3 seconds it come with one Skype has stoped working error and stops at Skype.

  Please help solve.

  Name of the failing application: Skype.exe, version: 7.6.0.105, time stamp: 0x559165ab
  The failed module name: ntdll.dll, version: 6.1.7601.18869, time stamp: 0 x 55636317
  Exception code: 0xc0000005

  DxDiag crashed into Direct3D:

  DxDiag previously: crashed to Direct3D (step 2). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information

  The problem with the installation of the driver ATI Mobility Radeon HD 5470. Reinstall this driver:

  https://www.Sony.co.UK/support/en/content/CNT-DWNL/PRD-comp/EP0000230054_5505/VPCEC2S0E

  Search other updates of the driver available too:

  https://www.Sony.co.UK/support/en/content/CNT-DWNL/VPCEC2S0E/list#OS1

  It may also be necessary to uninstall the applications of virtual video capture ManyCam and Dxtory.

• What can I do this message-"Toshiba DVD Player has stopped working"

  Hello

  My DVD drive used for good work... and then I installed iTunes.
  He then worked for a while, but only by using "Run as Administrator".

  After a few weeks I started getting the message "Toshiba DVD Player has stopped working".

  I uninstalled iTunes - and uninstalled and then re-installed DVD player - but it still doesn't work!
  Any solution please?

  Thanks in advance for your help.

  Ms. Q_reeus

  My solution is to remove a Toshiba DVD drive and install VLC player. You can get it for free.
  It can play all video formats, and you don't need additional codecs.

• The touchpad scrolling has stoped working on satellite

  The touchpad scrolling has stoped working.
  I restarted / reinstalled the driver / reformatted hardrive 3 times (this works but the feature soon stop) / sytem restore / disabled firewall /?

  Can anyone help please it is really annoying me for the first time I'm having a problem with this machine that really gets to me.

  And what satellite you have? Is - this new model of notebook with touchpad buttons?

• Equium A60 freezes - driver graphics card has stoped working

  Hello everyone, my A60 keeps freezing and a message appears saying that the ATI driver has stoped working properly it causes the screen to go really big and have a very low resolution. When I turn it on a blue error message and I have to put in safe mode so that it works, Ive downloaded the ATI driver and who is not worked, Ive used the recovery disc to clear everything and start over, but that is not worked,

  any1 has any other ideas? THANKS FOR YOUR HELP EVERYONE

  Marc

  Post edited by: marcisaacs

  Hello

  You should not use the ATI graphics driver because this driver is not designed for the use of the laptop. Toshiba recommends to use own graphics drivers because these drivers are specially designed for the use of the laptop.

  However, after getting the procedure books should work properly. If the failure occurs after this procedure again so I guess it must be something wrong with the hardware (graphics chip)
  I don t think you will be able to solve this problem yourself.
  In this case, you must contact the Toshiba ASP.

• HP QuickTouch screen has stoped working

  HP QuickTouch screen has stoped working

  Have you checked Support HP?

  http://WWW8.HP.com/us/en/support-drivers.html

• Grand Ages: Rome has stopped working

  Hello

  Can someone help me with this problem, I have a system that meets all of the minimum requirements of Grand Ages Rome.

  Microsoft Windows error:
  Grand Ages Rome has stopped working

  A problem caused the blocking of the program works correctly.
  Windows will close the program and notify you if a solution is
  available.

  (Close the program)

  My system:

  Manufacturer: Hewlett-Packard Company
  Model: Compaq Presario SR5790D
  Processor: Core 2 Duo E7300 (W) clocked at 2.66 GHz (65W)
  Memory (RAM): 3.00 GB
  Graphics card: Sapphire HD4670 512 MB GDDR4
  Hard drive: 320 GB
  Type of system: Windows Vista (32-bit Operating system)

  I tried re-installing, but the same problem persists. Can anyone of you out there, please help me to find a solution to this problem. Here, your help will be very much appreciated.

  Thank you & best regards

  Grand Ages: Rome - problem solved

  Enter www.grandages.com, go the Grand Ages: Rome section, under updates & Patches look for the link to your graphics card driver (Important notice > nForce Driver download or Download of Driver ATI). In my case, I went to the ATI site and RE-INSTALLED the LAST packet of the whole + driver graphic card software (as recommended on the site), THEN RESTART.

  Next step back to www.grandages.com, download and install the PATCH 1.11, then reboot again if necessary. After that, it was smooth sailing all the way, and the game has been able to start without any problems what so ever.

  Hope this might help someone out there with a similar problem.

  Cheers & consider that to all this he

• DVD player has stopped working

  I am running Vista Home Premium. My ATAPI DVD drive has stopped working. Device Manager shows it, drivers are updated, I tried Microsoft Fixit, nothing seems to work. I read about this problem, seems a lot of people have the same problem with no fix, what do I do?

  I am betting its windows. So what is my options, buy windows 7. Maybe a different o/s. How many problems like mine have had to deal with?

  Absolutely not... If the question is the disc or other material so you are stuck with a system
  You can not install it on. And there may be serious flaws that are too expensive to repair.

  Previously published several ways to use a variety of boot floppies to see if the driver will be
  actually boot outside of Windows. If this isn't the case, then you have a more serious problem. If it isn't
  startup then you should re - install Vista to be sure there is no other problems with the
  disc before any thought of the upgrade.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I turn on my Lexmark printer, I get a message saying that the host process (Rundll32) windows has stoped working

  I had trouble trying to use the system scan on my Lexmark printer. I have uninstalled & reinstalled the all-in-one Lexmark & now I get a message saying windows (Rundll32) host process has stoped working. Please can you help solve this problem.

  Concerning

  P. J.

  Hello

  1 did you change on your computer?

  I suggest you to follow the links and check out them.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to contact Lexmark printer and check.

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

• "display driver has stoped working, but was recovered" and then shuts down the system. "

  I have a problem with the opening of my yahoo email because my computer just Bonnac outside and flashes once or twice and says "display driver has stoped working, but was recovered" then shuts down the system. " Itsriving crazy me :(     (I have windows vista & pentium bicoeur.)

  This means that there is a problem with your graphics card. I suggest that to update your Windows and check of course latest service pack installed. Also check Windows problem and Solution Center and see if everything suggested installation listed there. It can make it appear to update your graphic card.

  If this isn't the case, try looking in the card of your gaphic provider or your PC support Web site to update its driver.

• My computer keeps telling me that my display R300 driver has stoped working, but has recovered.

  original title: my computer tells me that my display R300 driver has stoped working, but has recovered. What is a R300 display driver and how can I solve this problem?

  This happens often when I look at the videos on YouTube

  Hello LightningPurple,

  This problem may occur if the display on your computer driver does not work. I suggest that you update the drivers for your video card and check if you have the same problem. You can see the underside of section which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers.